All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Lars Täuber" <taeuber@bbaw.de>
To: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: MPTSAS: ("activate status led" | "find disc") in external enclosure
Date: Wed, 23 Apr 2008 09:55:11 +0200	[thread overview]
Message-ID: <20080423095511.f08a0cc5.taeuber@bbaw.de> (raw)
In-Reply-To: <1208880734.3105.24.camel@localhost.localdomain>

[-- Attachment #1: Type: text/plain, Size: 845 bytes --]

Hallo James,

James Bottomley <James.Bottomley@HansenPartnership.com> schrieb:
> On Tue, 2008-04-22 at 09:18 +0200, Lars Täuber wrote:
> You could start by asking the sg_ses tools what you have.  You need to
> find the sg device for your enclosure and then do
> 
> sg_ses --page=10 /dev/sg<n>

I just did it and attached the output
monosan:~ # sg_ses --page=10 /dev/sg19 > sg19.ses
    <<<additional: response too short>>>

 
> It will print out a list of what the enclosure thinks the addresses for
> the devices are.  Then I just need to verify they're SAT format and away
> we can go.

Thanks.
Lars


-- 
                            Informationstechnologie
Berlin-Brandenburgische Akademie der Wissenschaften
Jägerstrasse 22-23                     10117 Berlin
Tel.: +49 30 20370-352           http://www.bbaw.de

[-- Attachment #2: sg19.ses --]
[-- Type: application/octet-stream, Size: 12430 bytes --]

  PROMISE   3U-SAS-16-D BP    0107
    enclosure services device
Additional (device) element status diagnostic page:
  generation code: 0x0
  Element type: Array device, subenclosure id: 0
    element index: 0 [0x0]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 1
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4200
      phy identifier: 0x0
    element index: 1 [0x1]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 2
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4201
      phy identifier: 0x0
    element index: 2 [0x2]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 3
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4202
      phy identifier: 0x0
    element index: 3 [0x3]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 4
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4203
      phy identifier: 0x0
    element index: 4 [0x4]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 5
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4204
      phy identifier: 0x0
    element index: 5 [0x5]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 6
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4205
      phy identifier: 0x0
    element index: 6 [0x6]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 7
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4206
      phy identifier: 0x0
    element index: 7 [0x7]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 8
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4207
      phy identifier: 0x0
    element index: 8 [0x8]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 9
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4208
      phy identifier: 0x0
    element index: 9 [0x9]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 10
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b4209
      phy identifier: 0x0
    element index: 10 [0xa]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 11
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b420a
      phy identifier: 0x0
    element index: 11 [0xb]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 12
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b420b
      phy identifier: 0x0
    element index: 12 [0xc]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 13
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b420c
      phy identifier: 0x0
    element index: 13 [0xd]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 14
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b420d
      phy identifier: 0x0
    element index: 14 [0xe]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 15
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b420e
      phy identifier: 0x0
    element index: 15 [0xf]
    Transport protocol: SAS
    number of phys: 1, not all phys: 1, bay number: 16
    phy index: 0
      device type: no device attached
      initiator port for:
      target port for: SATA_device
      attached SAS address: 0x50001553561b423f
      SAS address: 0x50001553561b420f
      phy identifier: 0x0
  Element type: Enclosure services controller electronics, subenclosure id: 0
    element index: 38 [0x26]
    Transport protocol: SAS
    number of phys: 24
    phy index: 0
      phy identifier: 0x50
      connector element index: 21, other element index: 83
      SAS address: 0x561b423f28002a01
    phy index: 1
      phy identifier: 0x2c
      connector element index: 46, other element index: 3
      SAS address: 0x3004320534063607
    phy index: 2
      phy identifier: 0x38
      connector element index: 58, other element index: 9
      SAS address: 0x3c0a3e0b400c420d
    phy index: 3
      phy identifier: 0x44
      connector element index: 70, other element index: 15
      SAS address: 0x48ff49ff4aff4bff
    phy index: 4
      phy identifier: 0x4c
      connector element index: 77
      SAS address: 0x4eff4fff163e0027
    phy index: 5
      phy identifier: 0x18
      connector element index: 0, other element index: 0
      SAS address: 0x50001553561b433f
    phy index: 6
      phy identifier: 0x29
      connector element index: 43, other element index: 1
      SAS address: 0x2d022f0331043305
    phy index: 7
      phy identifier: 0x35
      connector element index: 55, other element index: 7
      SAS address: 0x39083b093d0a3f0b
    phy index: 8
      phy identifier: 0x41
      connector element index: 67, other element index: 13
      SAS address: 0x450e470f50ff51ff
    phy index: 9
      phy identifier: 0x52
      connector element index: 83
      SAS address: 0x54ff55ff56ff57ff
    phy index: 10
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 11
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 12
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 13
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 14
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 15
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 16
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 17
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 18
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 19
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 20
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 21
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 22
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 23
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    element index: 39 [0x27]
    Transport protocol: SAS
    number of phys: 24
    phy index: 0
      phy identifier: 0x50
      connector element index: 21, other element index: 83
      SAS address: 0x561b433f29002b01
    phy index: 1
      phy identifier: 0x2d
      connector element index: 47, other element index: 3
      SAS address: 0x3104330535063707
    phy index: 2
      phy identifier: 0x39
      connector element index: 59, other element index: 9
      SAS address: 0x3d0a3f0b410c430d
    phy index: 3
      phy identifier: 0x45
      connector element index: 71, other element index: 15
      SAS address: 0x50ff51ff52ff53ff
    phy index: 4
      phy identifier: 0x54
      connector element index: 85
      SAS address: 0x56ff57ff00000000
    phy index: 5
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 6
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 7
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 8
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 9
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 10
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 11
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 12
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 13
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 14
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 15
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 16
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 17
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 18
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 19
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 20
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 21
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 22
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000
    phy index: 23
      phy identifier: 0x0
      connector element index: 0, other element index: 0
      SAS address: 0x0000000000000000

      reply	other threads:[~2008-04-23  7:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-18 10:41 MPTSAS: ("activate status led" | "find disc") in external enclosure Lars Täuber
2008-04-18 14:29 ` James Bottomley
2008-04-21  9:01   ` Lars Täuber
2008-04-21 15:16     ` James Bottomley
2008-04-22  7:18       ` Lars Täuber
2008-04-22 15:44         ` Moore, Eric
2008-04-23  8:11           ` Lars Täuber
2008-04-23 15:39             ` Moore, Eric
2008-04-22 16:12         ` James Bottomley
2008-04-23  7:55           ` Lars Täuber [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080423095511.f08a0cc5.taeuber@bbaw.de \
    --to=taeuber@bbaw.de \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.