From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: add interrupt ack code to sh3
Date: Thu, 24 Apr 2008 12:36:34 +0000 [thread overview]
Message-ID: <20080424123634.19643.57391.sendpatchset@rx1.opensource.se> (raw)
This patch adds interrupt acknowledge code for external interrupt
sources on sh3 processors. Only really required for edge triggered
interrupts, but we ack regardless of sense configuration.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/kernel/cpu/irq/intc.c | 79 ++++++++++++++++++++++++++++++++++--
arch/sh/kernel/cpu/sh3/setup-sh3.c | 17 +++++--
include/asm-sh/hw_irq.h | 16 +++++++
3 files changed, 104 insertions(+), 8 deletions(-)
--- 0001/arch/sh/kernel/cpu/irq/intc.c
+++ work/arch/sh/kernel/cpu/irq/intc.c 2008-04-24 20:47:42.000000000 +0900
@@ -1,7 +1,7 @@
/*
* Shared interrupt handling code for IPR and INTC2 types of IRQs.
*
- * Copyright (C) 2007 Magnus Damm
+ * Copyright (C) 2007, 2008 Magnus Damm
*
* Based on intc2.c and ipr.c
*
@@ -62,6 +62,9 @@ struct intc_desc_int {
#endif
static unsigned int intc_prio_level[NR_IRQS]; /* for now */
+#ifdef CONFIG_CPU_SH3
+static unsigned long ack_handle[NR_IRQS];
+#endif
static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
{
@@ -219,6 +222,25 @@ static void intc_disable(unsigned int ir
}
}
+#ifdef CONFIG_CPU_SH3
+static void intc_mask_ack(unsigned int irq)
+{
+ struct intc_desc_int *d = get_intc_desc(irq);
+ unsigned long handle = ack_handle[irq];
+ unsigned long addr;
+
+ intc_disable(irq);
+
+ /* read register and write zero only to the assocaited bit */
+
+ if (handle) {
+ addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
+ ctrl_inb(addr);
+ ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+ }
+}
+#endif
+
static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
unsigned int nr_hp,
unsigned int irq)
@@ -430,6 +452,40 @@ static unsigned int __init intc_prio_dat
return 0;
}
+#ifdef CONFIG_CPU_SH3
+static unsigned int __init intc_ack_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id)
+{
+ struct intc_mask_reg *mr = desc->ack_regs;
+ unsigned int i, j, fn, mode;
+ unsigned long reg_e, reg_d;
+
+ for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) {
+ mr = desc->ack_regs + i;
+
+ for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
+ if (mr->enum_ids[j] != enum_id)
+ continue;
+
+ fn = REG_FN_MODIFY_BASE;
+ mode = MODE_ENABLE_REG;
+ reg_e = mr->set_reg;
+ reg_d = mr->set_reg;
+
+ fn += (mr->reg_width >> 3) - 1;
+ return _INTC_MK(fn, mode,
+ intc_get_reg(d, reg_e),
+ intc_get_reg(d, reg_d),
+ 1,
+ (mr->reg_width - 1) - j);
+ }
+ }
+
+ return 0;
+}
+#endif
+
static unsigned int __init intc_sense_data(struct intc_desc *desc,
struct intc_desc_int *d,
intc_enum enum_id)
@@ -530,6 +586,11 @@ static void __init intc_register_irq(str
/* irq should be disabled by default */
d->chip.mask(irq);
+
+#ifdef CONFIG_CPU_SH3
+ if (desc->ack_regs)
+ ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+#endif
}
static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -560,6 +621,9 @@ void __init register_intc_controller(str
d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
+#ifdef CONFIG_CPU_SH3
+ d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
+#endif
d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
#ifdef CONFIG_SMP
d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
@@ -592,14 +656,23 @@ void __init register_intc_controller(str
}
}
- BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
d->chip.name = desc->name;
d->chip.mask = intc_disable;
d->chip.unmask = intc_enable;
d->chip.mask_ack = intc_disable;
d->chip.set_type = intc_set_sense;
+#ifdef CONFIG_CPU_SH3
+ if (desc->ack_regs) {
+ for (i = 0; i < desc->nr_ack_regs; i++)
+ k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
+
+ d->chip.mask_ack = intc_mask_ack;
+ }
+#endif
+
+ BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
+
for (i = 0; i < desc->nr_vectors; i++) {
struct intc_vect *vect = desc->vectors + i;
--- 0010/arch/sh/kernel/cpu/sh3/setup-sh3.c
+++ work/arch/sh/kernel/cpu/sh3/setup-sh3.c 2008-04-24 20:25:24.000000000 +0900
@@ -35,15 +35,22 @@ static struct intc_prio_reg prio_registe
{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
};
+static struct intc_mask_reg ack_registers[] __initdata = {
+ { 0xa4000004, 0, 8, /* IRR0 */
+ { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
};
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh3-irq0123", vectors_irq0123,
- NULL, NULL, prio_registers, sense_registers);
-
-static DECLARE_INTC_DESC(intc_desc_irq45, "sh3-irq45", vectors_irq45,
- NULL, NULL, prio_registers, sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
+ vectors_irq0123, NULL, NULL,
+ prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
+ vectors_irq45, NULL, NULL,
+ prio_registers, sense_registers, ack_registers);
#define INTC_ICR1 0xa4000010UL
#define INTC_ICR1_IRQLVL (1<<14)
--- 0010/include/asm-sh/hw_irq.h
+++ work/include/asm-sh/hw_irq.h 2008-04-24 20:25:24.000000000 +0900
@@ -79,6 +79,10 @@ struct intc_desc {
struct intc_sense_reg *sense_regs;
unsigned int nr_sense_regs;
char *name;
+#ifdef CONFIG_CPU_SH3
+ struct intc_mask_reg *ack_regs;
+ unsigned int nr_ack_regs;
+#endif
};
#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@@ -91,6 +95,18 @@ struct intc_desc symbol __initdata = {
chipname, \
}
+#ifdef CONFIG_CPU_SH3
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \
+ mask_regs, prio_regs, sense_regs, ack_regs) \
+struct intc_desc symbol __initdata = { \
+ _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
+ _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
+ _INTC_ARRAY(sense_regs), \
+ chipname, \
+ _INTC_ARRAY(ack_regs), \
+}
+#endif
+
void __init register_intc_controller(struct intc_desc *desc);
int intc_set_priority(unsigned int irq, unsigned int prio);
next reply other threads:[~2008-04-24 12:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-24 12:36 Magnus Damm [this message]
2008-07-04 3:37 ` [PATCH] sh: add interrupt ack code to sh4a Yoshihiro Shimoda
2008-07-04 3:55 ` Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080424123634.19643.57391.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.