All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@caiaq.org>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 2/3] asoc tlv320aic3x: add GPIO support
Date: Fri, 25 Apr 2008 14:59:51 +0200	[thread overview]
Message-ID: <20080425125951.GB20569@buzzloop.caiaq.de> (raw)
In-Reply-To: <s5hmynil20d.wl%tiwai@suse.de>

[-- Attachment #1: Type: text/plain, Size: 475 bytes --]

On Fri, Apr 25, 2008 at 11:25:38AM +0200, Takashi Iwai wrote:
> > +int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
> > +{
> > +	u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
> > +	u8 val, bit = gpio ? 2: 1;
> > +
> > +	aic3x_read(codec, reg, &val);
> > +	return !!(val & (1 << bit));
> 
> I prefer a form like
> 	return (val >> bit) & 1;
> 
> "!!" often makes hard to read.

Patch rebased to match with other changes introduced by the clocking
patch.

Daniel


[-- Attachment #2: alsa-tlv320aic33-gpio.diff --]
[-- Type: text/x-diff, Size: 5478 bytes --]

diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index d76fa35..6e4bc69 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -138,6 +138,20 @@ static int aic3x_write(struct snd_soc_codec *codec, unsigned int reg,
 		return -EIO;
 }
 
+/*
+ * read from the aic3x register space
+ */
+static int aic3x_read(struct snd_soc_codec *codec, unsigned int reg,
+		      u8 *value)
+{
+	*value = reg & 0xff;
+	if (codec->hw_read(codec->control_data, value, 1) != 1)
+		return -EIO;
+
+	aic3x_write_reg_cache(codec, reg, *value);
+	return 0;
+}
+
 #define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_volsw, \
@@ -911,6 +925,33 @@ static int aic3x_dapm_event(struct snd_soc_codec *codec, int event)
 	return 0;
 }
 
+void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state)
+{
+	u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
+	u8 bit = gpio ? 3: 0;
+	u8 val = aic3x_read_reg_cache(codec, reg) & ~(1 << bit);
+	aic3x_write(codec, reg, val | (!!state << bit));
+}
+EXPORT_SYMBOL_GPL(aic3x_set_gpio);
+
+int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
+{
+	u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
+	u8 val, bit = gpio ? 2: 1;
+
+	aic3x_read(codec, reg, &val);
+	return (val >> bit) & 1;
+}
+EXPORT_SYMBOL_GPL(aic3x_get_gpio);
+
+int aic3x_headset_detected(struct snd_soc_codec *codec)
+{
+	u8 val;
+	aic3x_read(codec, AIC3X_RT_IRQ_FLAGS_REG, &val);
+	return (val >> 2) & 1;
+}
+EXPORT_SYMBOL_GPL(aic3x_headset_detected);
+
 #define AIC3X_RATES	SNDRV_PCM_RATE_8000_96000
 #define AIC3X_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
 			 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
@@ -977,6 +1018,7 @@ static int aic3x_resume(struct platform_device *pdev)
 static int aic3x_init(struct snd_soc_device *socdev)
 {
 	struct snd_soc_codec *codec = socdev->codec;
+	struct aic3x_setup_data *setup = socdev->codec_data;
 	int reg, ret = 0;
 
 	codec->name = "aic3x";
@@ -1067,6 +1109,10 @@ static int aic3x_init(struct snd_soc_device *socdev)
 	/* off, with power on */
 	aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
 
+	/* setup GPIO functions */
+	aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4);
+	aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4);
+
 	aic3x_add_controls(codec);
 	aic3x_add_widgets(codec);
 	ret = snd_soc_register_card(socdev);
@@ -1174,6 +1220,12 @@ static struct i2c_client client_template = {
 	.name = "AIC3X",
 	.driver = &aic3x_i2c_driver,
 };
+
+static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)
+{
+	value[0] = i2c_smbus_read_byte_data(client, value[0]);
+	return (len == 1);
+}
 #endif
 
 static int aic3x_probe(struct platform_device *pdev)
@@ -1208,6 +1260,7 @@ static int aic3x_probe(struct platform_device *pdev)
 	if (setup->i2c_address) {
 		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t) i2c_master_send;
+		codec->hw_read = (hw_read_t) aic3x_i2c_read;
 		ret = i2c_add_driver(&aic3x_i2c_driver);
 		if (ret != 0)
 			printk(KERN_ERR "can't add i2c driver");
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index d49d001..c1dd1ac 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -108,8 +108,14 @@
 #define DACR1_2_RLOPM_VOL		92
 #define LLOPM_CTRL			86
 #define RLOPM_CTRL			93
-/* Clock generation control register */
+/* GPIO/IRQ registers */
+#define AIC3X_STICKY_IRQ_FLAGS_REG	96
+#define AIC3X_RT_IRQ_FLAGS_REG		97
+#define AIC3X_GPIO1_REG			98
+#define AIC3X_GPIO2_REG			99
+#define AIC3X_GPIOA_REG			100
 #define AIC3X_GPIOB_REG			101
+/* Clock generation control register */
 #define AIC3X_CLKGEN_CTRL_REG		102
 
 /* Page select register bits */
@@ -175,8 +181,49 @@
 /* Default input volume */
 #define DEFAULT_GAIN    0x20
 
+/* GPIO API */
+enum {
+	AIC3X_GPIO1_FUNC_DISABLED		= 0,
+	AIC3X_GPIO1_FUNC_AUDIO_WORDCLK_ADC	= 1,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX		= 2,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV2		= 3,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV4		= 4,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV8		= 5,
+	AIC3X_GPIO1_FUNC_SHORT_CIRCUIT_IRQ	= 6,
+	AIC3X_GPIO1_FUNC_AGC_NOISE_IRQ		= 7,
+	AIC3X_GPIO1_FUNC_INPUT			= 8,
+	AIC3X_GPIO1_FUNC_OUTPUT			= 9,
+	AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK	= 10,
+	AIC3X_GPIO1_FUNC_AUDIO_WORDCLK		= 11,
+	AIC3X_GPIO1_FUNC_BUTTON_IRQ		= 12,
+	AIC3X_GPIO1_FUNC_HEADSET_DETECT_IRQ	= 13,
+	AIC3X_GPIO1_FUNC_HEADSET_DETECT_OR_BUTTON_IRQ	= 14,
+	AIC3X_GPIO1_FUNC_ALL_IRQ		= 16
+};
+
+enum {
+	AIC3X_GPIO2_FUNC_DISABLED		= 0,
+	AIC3X_GPIO2_FUNC_HEADSET_DETECT_IRQ	= 2,
+	AIC3X_GPIO2_FUNC_INPUT			= 3,
+	AIC3X_GPIO2_FUNC_OUTPUT			= 4,
+	AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT	= 5,
+	AIC3X_GPIO2_FUNC_AUDIO_BITCLK		= 8,
+	AIC3X_GPIO2_FUNC_HEADSET_DETECT_OR_BUTTON_IRQ = 9,
+	AIC3X_GPIO2_FUNC_ALL_IRQ		= 10,
+	AIC3X_GPIO2_FUNC_SHORT_CIRCUIT_OR_AGC_IRQ = 11,
+	AIC3X_GPIO2_FUNC_HEADSET_OR_BUTTON_PRESS_OR_SHORT_CIRCUIT_IRQ = 12,
+	AIC3X_GPIO2_FUNC_SHORT_CIRCUIT_IRQ	= 13,
+	AIC3X_GPIO2_FUNC_AGC_NOISE_IRQ		= 14,
+	AIC3X_GPIO2_FUNC_BUTTON_PRESS_IRQ	= 15
+};
+
+void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state);
+int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio);
+int aic3x_headset_detected(struct snd_soc_codec *codec);
+
 struct aic3x_setup_data {
 	unsigned short i2c_address;
+	unsigned int gpio_func[2];
 };
 
 extern struct snd_soc_codec_dai aic3x_dai;

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

      parent reply	other threads:[~2008-04-25 12:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-25  9:17 [PATCH 2/3] asoc tlv320aic3x: add GPIO support Daniel Mack
2008-04-25  9:25 ` Takashi Iwai
2008-04-25  9:39   ` Daniel Mack
2008-04-25 12:59   ` Daniel Mack [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080425125951.GB20569@buzzloop.caiaq.de \
    --to=daniel@caiaq.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.