Re: mmc_spi.c driver

[David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>]

On Thursday 24 April 2008, Pierre Ossman wrote:
> On Tue, 15 Apr 2008 15:26:54 -0400
> "hartleys" <hartleys-3FF4nKcrg1dE2c76skzGb0EOCMrvLtNR@public.gmane.org> wrote:
> 
> > I do get the IRQ on every card insertion and removal. Actually if I boot
> > the system with the card removed I end up getting a:
> > 
> > mmc0: error -22 whilst initialising SDIO card  
> 
> This is a bit odd. It shouldn't have gone down that route unless it is
> sure it's an SDIO card it is dealing with.

I've seen that in the past, I forget why.  It may have been the
problem with cards that didn't like to respond to certain requests
while they're resetting ... the problem which ensures that I must
always use the appended patch, since you didn't want to merge it.


> > If I then insert the card I get the IRQ and:
> > 
> > mmc0: new MMC card on SPI
> > mmcblk0: mmc0:0001 SDM064 62720KiB
> >  mmcblk0: p1 p2 p3 p4
> > 
> > So it appears the initial card detect does work. But for some reason
> > it's not seeing the removal of the card or the insertion of a new card.
> > 
> > Any ideas?  
> 
> Without debugging info it's impossible to tell if it's the driver or
> the core that's doing something wrong. Have you checked that
> interrupts keep coming?  

I have a patch I've been playing with that should help make the card
detect debounce work better.  I'll send it along in a bit.  Not sure
it's properly cooked yet.  I *do* still observe delays in detection
of the removal ... sometimes adding up to "not detected"; and when
those delays appear, similar delays in detecting newly inserted cards.
Removing then re-inserting seems to help at that point.


> David, I don't suppose you've checked if you can reproduce this?

I tried with a few cards; nope, no such problems observed.

- Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone