From: Ramachandra K <ramachandra.kuchimanchi@qlogic.com>
To: rdreier@cisco.com, general@lists.openfabrics.org, netdev@vger.kernel.org
Cc: poornima.kamath@qlogic.com, amar.mudrankit@qlogic.com
Subject: [ofa-general] [PATCH 07/13] QLogic VNIC: Handling configurable parameters of the driver
Date: Wed, 30 Apr 2008 22:49:25 +0530 [thread overview]
Message-ID: <20080430171925.31725.22023.stgit@localhost.localdomain> (raw)
In-Reply-To: <20080430171028.31725.86190.stgit@localhost.localdomain>
From: Poornima Kamath <poornima.kamath@qlogic.com>
This patch adds the files that handle various configurable parameters
of the VNIC driver ---- configuration of virtual NIC, control, data
connections to the EVIC and general IB connection parameters.
Signed-off-by: Ramachandra K <ramachandra.kuchimanchi@qlogic.com>
Signed-off-by: Amar Mudrankit <amar.mudrankit@qlogic.com>
---
drivers/infiniband/ulp/qlgc_vnic/vnic_config.c | 380 ++++++++++++++++++++++++
drivers/infiniband/ulp/qlgc_vnic/vnic_config.h | 242 +++++++++++++++
2 files changed, 622 insertions(+), 0 deletions(-)
create mode 100644 drivers/infiniband/ulp/qlgc_vnic/vnic_config.c
create mode 100644 drivers/infiniband/ulp/qlgc_vnic/vnic_config.h
diff --git a/drivers/infiniband/ulp/qlgc_vnic/vnic_config.c b/drivers/infiniband/ulp/qlgc_vnic/vnic_config.c
new file mode 100644
index 0000000..86d99b6
--- /dev/null
+++ b/drivers/infiniband/ulp/qlgc_vnic/vnic_config.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/utsname.h>
+#include <linux/if_vlan.h>
+
+#include <rdma/ib_cache.h>
+
+#include "vnic_util.h"
+#include "vnic_config.h"
+#include "vnic_trailer.h"
+#include "vnic_main.h"
+
+u16 vnic_max_mtu = MAX_MTU;
+
+static u32 default_no_path_timeout = DEFAULT_NO_PATH_TIMEOUT;
+static u32 sa_path_rec_get_timeout = SA_PATH_REC_GET_TIMEOUT;
+static u32 default_primary_reconnect_timeout =
+ DEFAULT_PRIMARY_RECONNECT_TIMEOUT;
+static u32 default_primary_switch_timeout = DEFAULT_PRIMARY_SWITCH_TIMEOUT;
+static int default_prefer_primary = DEFAULT_PREFER_PRIMARY;
+
+static int use_rx_csum = VNIC_USE_RX_CSUM;
+static int use_tx_csum = VNIC_USE_TX_CSUM;
+
+static u32 control_response_timeout = CONTROL_RSP_TIMEOUT;
+static u32 completion_limit = DEFAULT_COMPLETION_LIMIT;
+
+module_param(vnic_max_mtu, ushort, 0444);
+MODULE_PARM_DESC(vnic_max_mtu, "Maximum MTU size (1500-9500). Default is 9500");
+
+module_param(default_prefer_primary, bool, 0444);
+MODULE_PARM_DESC(default_prefer_primary, "Determines if primary path is"
+ " preferred (1) or not (0). Defaults to 0");
+module_param(use_rx_csum, bool, 0444);
+MODULE_PARM_DESC(use_rx_csum, "Determines if RX checksum is done on VEx (1)"
+ " or not (0). Defaults to 1");
+module_param(use_tx_csum, bool, 0444);
+MODULE_PARM_DESC(use_tx_csum, "Determines if TX checksum is done on VEx (1)"
+ " or not (0). Defaults to 1");
+module_param(default_no_path_timeout, uint, 0444);
+MODULE_PARM_DESC(default_no_path_timeout, "Time to wait in milliseconds"
+ " before reconnecting to VEx after connection loss");
+module_param(default_primary_reconnect_timeout, uint, 0444);
+MODULE_PARM_DESC(default_primary_reconnect_timeout, "Time to wait in"
+ " milliseconds before reconnecting the"
+ " primary path to VEx");
+module_param(default_primary_switch_timeout, uint, 0444);
+MODULE_PARM_DESC(default_primary_switch_timeout, "Time to wait before"
+ " switching back to primary path if"
+ " primary path is preferred");
+module_param(sa_path_rec_get_timeout, uint, 0444);
+MODULE_PARM_DESC(sa_path_rec_get_timeout, "Time out value in milliseconds"
+ " for SA path record get queries");
+
+module_param(control_response_timeout, uint, 0444);
+MODULE_PARM_DESC(control_response_timeout, "Time out value in milliseconds"
+ " to wait for response to control requests");
+
+module_param(completion_limit, uint, 0444);
+MODULE_PARM_DESC(completion_limit, "Maximum completions to process"
+ " in a single completion callback invocation. Default is 100"
+ " Minimum value is 10");
+
+static void config_control_defaults(struct control_config *control_config,
+ struct path_param *params)
+{
+ int len;
+ char *dot;
+ u64 sid;
+
+ sid = (SST_AGN << 56) | (SST_OUI << 32) | (CONTROL_PATH_ID << 8)
+ | IOC_NUMBER(be64_to_cpu(params->ioc_guid));
+
+ control_config->ib_config.service_id = cpu_to_be64(sid);
+ control_config->ib_config.conn_data.path_id = 0;
+ control_config->ib_config.conn_data.vnic_instance = params->instance;
+ control_config->ib_config.conn_data.path_num = 0;
+ control_config->ib_config.conn_data.features_supported =
+ __constant_cpu_to_be32((u32) (VNIC_FEAT_IGNORE_VLAN |
+ VNIC_FEAT_RDMA_IMMED));
+ dot = strchr(init_utsname()->nodename, '.');
+
+ if (dot)
+ len = dot - init_utsname()->nodename;
+ else
+ len = strlen(init_utsname()->nodename);
+
+ if (len > VNIC_MAX_NODENAME_LEN)
+ len = VNIC_MAX_NODENAME_LEN;
+
+ memcpy(control_config->ib_config.conn_data.nodename,
+ init_utsname()->nodename, len);
+
+ if (params->ib_multicast == 1)
+ control_config->ib_multicast = 1;
+ else if (params->ib_multicast == 0)
+ control_config->ib_multicast = 0;
+ else {
+ /* parameter is not set - enable it by default */
+ control_config->ib_multicast = 1;
+ CONFIG_ERROR("IOCGUID=%llx INSTANCE=%d IB_MULTICAST defaulted"
+ " to TRUE\n", params->ioc_guid,
+ (char)params->instance);
+ }
+
+ if (control_config->ib_multicast)
+ control_config->ib_config.conn_data.features_supported |=
+ __constant_cpu_to_be32(VNIC_FEAT_INBOUND_IB_MC);
+
+ control_config->ib_config.retry_count = RETRY_COUNT;
+ control_config->ib_config.rnr_retry_count = RETRY_COUNT;
+ control_config->ib_config.min_rnr_timer = MIN_RNR_TIMER;
+
+ /* These values are not configurable*/
+ control_config->ib_config.num_recvs = 5;
+ control_config->ib_config.num_sends = 1;
+ control_config->ib_config.recv_scatter = 1;
+ control_config->ib_config.send_gather = 1;
+ control_config->ib_config.completion_limit = completion_limit;
+
+ control_config->num_recvs = control_config->ib_config.num_recvs;
+
+ control_config->vnic_instance = params->instance;
+ control_config->max_address_entries = MAX_ADDRESS_ENTRIES;
+ control_config->min_address_entries = MIN_ADDRESS_ENTRIES;
+ control_config->rsp_timeout = msecs_to_jiffies(control_response_timeout);
+}
+
+static void config_data_defaults(struct data_config *data_config,
+ struct path_param *params)
+{
+ u64 sid;
+
+ sid = (SST_AGN << 56) | (SST_OUI << 32) | (DATA_PATH_ID << 8)
+ | IOC_NUMBER(be64_to_cpu(params->ioc_guid));
+
+ data_config->ib_config.service_id = cpu_to_be64(sid);
+ data_config->ib_config.conn_data.path_id = jiffies; /* random */
+ data_config->ib_config.conn_data.vnic_instance = params->instance;
+ data_config->ib_config.conn_data.path_num = 0;
+
+ data_config->ib_config.retry_count = RETRY_COUNT;
+ data_config->ib_config.rnr_retry_count = RETRY_COUNT;
+ data_config->ib_config.min_rnr_timer = MIN_RNR_TIMER;
+
+ /*
+ * NOTE: the num_recvs size assumes that the EIOC could
+ * RDMA enough packets to fill all of the host recv
+ * pool entries, plus send a kick message after each
+ * packet, plus RDMA new buffers for the size of
+ * the EIOC recv buffer pool, plus send kick messages
+ * after each min_host_update_sz of new buffers all
+ * before the host can even pull off the first completed
+ * receive off the completion queue, and repost the
+ * receive. NOT LIKELY!
+ */
+ data_config->ib_config.num_recvs = HOST_RECV_POOL_ENTRIES +
+ (MAX_EIOC_POOL_SZ / MIN_HOST_UPDATE_SZ);
+
+ data_config->ib_config.num_sends = (2 * NOTIFY_BUNDLE_SZ) +
+ (HOST_RECV_POOL_ENTRIES / MIN_EIOC_UPDATE_SZ) + 1;
+
+ data_config->ib_config.recv_scatter = 1; /* not configurable */
+ data_config->ib_config.send_gather = 2; /* not configurable */
+ data_config->ib_config.completion_limit = completion_limit;
+
+ data_config->num_recvs = data_config->ib_config.num_recvs;
+ data_config->path_id = data_config->ib_config.conn_data.path_id;
+
+
+ data_config->host_recv_pool_entries = HOST_RECV_POOL_ENTRIES;
+
+ data_config->host_min.size_recv_pool_entry =
+ cpu_to_be32(BUFFER_SIZE(VLAN_ETH_HLEN + MIN_MTU));
+ data_config->host_max.size_recv_pool_entry =
+ cpu_to_be32(BUFFER_SIZE(VLAN_ETH_HLEN + vnic_max_mtu));
+ data_config->eioc_min.size_recv_pool_entry =
+ cpu_to_be32(BUFFER_SIZE(VLAN_ETH_HLEN + MIN_MTU));
+ data_config->eioc_max.size_recv_pool_entry =
+ __constant_cpu_to_be32(MAX_PARAM_VALUE);
+
+ data_config->host_min.num_recv_pool_entries =
+ __constant_cpu_to_be32(MIN_HOST_POOL_SZ);
+ data_config->host_max.num_recv_pool_entries =
+ __constant_cpu_to_be32(MAX_PARAM_VALUE);
+ data_config->eioc_min.num_recv_pool_entries =
+ __constant_cpu_to_be32(MIN_EIOC_POOL_SZ);
+ data_config->eioc_max.num_recv_pool_entries =
+ __constant_cpu_to_be32(MAX_EIOC_POOL_SZ);
+
+ data_config->host_min.timeout_before_kick =
+ __constant_cpu_to_be32(MIN_HOST_KICK_TIMEOUT);
+ data_config->host_max.timeout_before_kick =
+ __constant_cpu_to_be32(MAX_HOST_KICK_TIMEOUT);
+ data_config->eioc_min.timeout_before_kick = 0;
+ data_config->eioc_max.timeout_before_kick =
+ __constant_cpu_to_be32(MAX_PARAM_VALUE);
+
+ data_config->host_min.num_recv_pool_entries_before_kick =
+ __constant_cpu_to_be32(MIN_HOST_KICK_ENTRIES);
+ data_config->host_max.num_recv_pool_entries_before_kick =
+ __constant_cpu_to_be32(MAX_HOST_KICK_ENTRIES);
+ data_config->eioc_min.num_recv_pool_entries_before_kick = 0;
+ data_config->eioc_max.num_recv_pool_entries_before_kick =
+ __constant_cpu_to_be32(MAX_PARAM_VALUE);
+
+ data_config->host_min.num_recv_pool_bytes_before_kick =
+ __constant_cpu_to_be32(MIN_HOST_KICK_BYTES);
+ data_config->host_max.num_recv_pool_bytes_before_kick =
+ __constant_cpu_to_be32(MAX_HOST_KICK_BYTES);
+ data_config->eioc_min.num_recv_pool_bytes_before_kick = 0;
+ data_config->eioc_max.num_recv_pool_bytes_before_kick =
+ __constant_cpu_to_be32(MAX_PARAM_VALUE);
+
+ data_config->host_min.free_recv_pool_entries_per_update =
+ __constant_cpu_to_be32(MIN_HOST_UPDATE_SZ);
+ data_config->host_max.free_recv_pool_entries_per_update =
+ __constant_cpu_to_be32(MAX_HOST_UPDATE_SZ);
+ data_config->eioc_min.free_recv_pool_entries_per_update =
+ __constant_cpu_to_be32(MIN_EIOC_UPDATE_SZ);
+ data_config->eioc_max.free_recv_pool_entries_per_update =
+ __constant_cpu_to_be32(MAX_EIOC_UPDATE_SZ);
+
+ data_config->notify_bundle = NOTIFY_BUNDLE_SZ;
+}
+
+static void config_path_info_defaults(struct viport_config *config,
+ struct path_param *params)
+{
+ int i;
+ ib_get_cached_gid(config->ibdev, config->port, 0,
+ &config->path_info.path.sgid);
+ for (i = 0; i < 16; i++)
+ config->path_info.path.dgid.raw[i] = params->dgid[i];
+
+ config->path_info.path.pkey = params->pkey;
+ config->path_info.path.numb_path = 1;
+ config->sa_path_rec_get_timeout = sa_path_rec_get_timeout;
+
+}
+
+static void config_viport_defaults(struct viport_config *config,
+ struct path_param *params)
+{
+ config->ibdev = params->ibdev;
+ config->port = params->port;
+ config->ioc_guid = params->ioc_guid;
+ config->stats_interval = msecs_to_jiffies(VIPORT_STATS_INTERVAL);
+ config->hb_interval = msecs_to_jiffies(VIPORT_HEARTBEAT_INTERVAL);
+ config->hb_timeout = VIPORT_HEARTBEAT_TIMEOUT * 1000;
+ /*hb_timeout needs to be in usec*/
+ strcpy(config->ioc_string, params->ioc_string);
+ config_path_info_defaults(config, params);
+
+ config_control_defaults(&config->control_config, params);
+ config_data_defaults(&config->data_config, params);
+}
+
+static void config_vnic_defaults(struct vnic_config *config)
+{
+ config->no_path_timeout = msecs_to_jiffies(default_no_path_timeout);
+ config->primary_connect_timeout =
+ msecs_to_jiffies(DEFAULT_PRIMARY_CONNECT_TIMEOUT);
+ config->primary_reconnect_timeout =
+ msecs_to_jiffies(default_primary_reconnect_timeout);
+ config->primary_switch_timeout =
+ msecs_to_jiffies(default_primary_switch_timeout);
+ config->prefer_primary = default_prefer_primary;
+ config->use_rx_csum = use_rx_csum;
+ config->use_tx_csum = use_tx_csum;
+}
+
+struct viport_config *config_alloc_viport(struct path_param *params)
+{
+ struct viport_config *config;
+
+ config = kzalloc(sizeof *config, GFP_KERNEL);
+ if (!config) {
+ CONFIG_ERROR("could not allocate memory for"
+ " struct viport_config\n");
+ return NULL;
+ }
+
+ config_viport_defaults(config, params);
+
+ return config;
+}
+
+struct vnic_config *config_alloc_vnic(void)
+{
+ struct vnic_config *config;
+
+ config = kzalloc(sizeof *config, GFP_KERNEL);
+ if (!config) {
+ CONFIG_ERROR("couldn't allocate memory for"
+ " struct vnic_config\n");
+
+ return NULL;
+ }
+
+ config_vnic_defaults(config);
+ return config;
+}
+
+char *config_viport_name(struct viport_config *config)
+{
+ /* function only called by one thread, can return a static string */
+ static char str[64];
+
+ sprintf(str, "GUID %llx instance %d",
+ be64_to_cpu(config->ioc_guid),
+ config->control_config.vnic_instance);
+ return str;
+}
+
+int config_start(void)
+{
+ vnic_max_mtu = min_t(u16, vnic_max_mtu, MAX_MTU);
+ vnic_max_mtu = max_t(u16, vnic_max_mtu, MIN_MTU);
+
+ sa_path_rec_get_timeout = min_t(u32, sa_path_rec_get_timeout,
+ MAX_SA_TIMEOUT);
+ sa_path_rec_get_timeout = max_t(u32, sa_path_rec_get_timeout,
+ MIN_SA_TIMEOUT);
+
+ control_response_timeout = min_t(u32, control_response_timeout,
+ MAX_CONTROL_RSP_TIMEOUT);
+
+ control_response_timeout = max_t(u32, control_response_timeout,
+ MIN_CONTROL_RSP_TIMEOUT);
+
+ completion_limit = max_t(u32, completion_limit,
+ MIN_COMPLETION_LIMIT);
+
+ if (!default_no_path_timeout)
+ default_no_path_timeout = DEFAULT_NO_PATH_TIMEOUT;
+
+ if (!default_primary_reconnect_timeout)
+ default_primary_reconnect_timeout =
+ DEFAULT_PRIMARY_RECONNECT_TIMEOUT;
+
+ if (!default_primary_switch_timeout)
+ default_primary_switch_timeout =
+ DEFAULT_PRIMARY_SWITCH_TIMEOUT;
+
+ return 0;
+
+}
diff --git a/drivers/infiniband/ulp/qlgc_vnic/vnic_config.h b/drivers/infiniband/ulp/qlgc_vnic/vnic_config.h
new file mode 100644
index 0000000..c5b00b9
--- /dev/null
+++ b/drivers/infiniband/ulp/qlgc_vnic/vnic_config.h
@@ -0,0 +1,242 @@
+/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef VNIC_CONFIG_H_INCLUDED
+#define VNIC_CONFIG_H_INCLUDED
+
+#include <rdma/ib_verbs.h>
+#include <linux/types.h>
+#include <linux/if.h>
+
+#include "vnic_control.h"
+#include "vnic_ib.h"
+
+#define SST_AGN 0x10ULL
+#define SST_OUI 0x00066AULL
+
+enum {
+ CONTROL_PATH_ID = 0x0,
+ DATA_PATH_ID = 0x1
+};
+
+#define IOC_NUMBER(GUID) (((GUID) >> 32) & 0xFF)
+
+enum {
+ VNIC_CLASS_SUBCLASS = 0x2000066A,
+ VNIC_PROTOCOL = 0,
+ VNIC_PROT_VERSION = 1
+};
+
+enum {
+ MIN_MTU = 1500, /* minimum negotiated MTU size */
+ MAX_MTU = 9500 /* jumbo frame */
+};
+
+/*
+ * TODO: tune the pool parameter values
+ */
+enum {
+ MIN_ADDRESS_ENTRIES = 16,
+ MAX_ADDRESS_ENTRIES = 64
+};
+
+enum {
+ HOST_RECV_POOL_ENTRIES = 512,
+ MIN_HOST_POOL_SZ = 64,
+ MIN_EIOC_POOL_SZ = 64,
+ MAX_EIOC_POOL_SZ = 256,
+ MIN_HOST_UPDATE_SZ = 8,
+ MAX_HOST_UPDATE_SZ = 32,
+ MIN_EIOC_UPDATE_SZ = 8,
+ MAX_EIOC_UPDATE_SZ = 32,
+ NOTIFY_BUNDLE_SZ = 32
+};
+
+enum {
+ MIN_HOST_KICK_TIMEOUT = 10, /* in usec */
+ MAX_HOST_KICK_TIMEOUT = 100 /* in usec */
+};
+
+enum {
+ MIN_HOST_KICK_ENTRIES = 1,
+ MAX_HOST_KICK_ENTRIES = 128
+};
+
+enum {
+ MIN_HOST_KICK_BYTES = 0,
+ MAX_HOST_KICK_BYTES = 5000
+};
+
+enum {
+ DEFAULT_NO_PATH_TIMEOUT = 10000,
+ DEFAULT_PRIMARY_CONNECT_TIMEOUT = 10000,
+ DEFAULT_PRIMARY_RECONNECT_TIMEOUT = 10000,
+ DEFAULT_PRIMARY_SWITCH_TIMEOUT = 10000
+};
+
+enum {
+ VIPORT_STATS_INTERVAL = 500, /* .5 sec */
+ VIPORT_HEARTBEAT_INTERVAL = 1000, /* 1 second */
+ VIPORT_HEARTBEAT_TIMEOUT = 64000 /* 64 sec */
+};
+
+enum {
+ /* 5 sec increased for EVIC support for large number of
+ * host connections
+ */
+ CONTROL_RSP_TIMEOUT = 5000,
+ MIN_CONTROL_RSP_TIMEOUT = 1000, /* 1 sec */
+ MAX_CONTROL_RSP_TIMEOUT = 60000 /* 60 sec */
+};
+
+/* Maximum number of completions to be processed
+ * during a single completion callback invocation
+ */
+enum {
+ DEFAULT_COMPLETION_LIMIT = 100,
+ MIN_COMPLETION_LIMIT = 10
+};
+
+/* infiniband connection parameters */
+enum {
+ RETRY_COUNT = 3,
+ MIN_RNR_TIMER = 22, /* 20 ms */
+ DEFAULT_PKEY = 0 /* pkey table index */
+};
+
+enum {
+ SA_PATH_REC_GET_TIMEOUT = 1000, /* 1000 ms */
+ MIN_SA_TIMEOUT = 100, /* 100 ms */
+ MAX_SA_TIMEOUT = 20000 /* 20s */
+};
+
+#define MAX_PARAM_VALUE 0x40000000
+#define VNIC_USE_RX_CSUM 1
+#define VNIC_USE_TX_CSUM 1
+#define DEFAULT_PREFER_PRIMARY 0
+
+/* As per IBTA specification, IOCString Maximum length can be 512 bits. */
+#define MAX_IOC_STRING_LEN (512/8)
+
+struct path_param {
+ __be64 ioc_guid;
+ u8 ioc_string[MAX_IOC_STRING_LEN+1];
+ u8 port;
+ u8 instance;
+ struct ib_device *ibdev;
+ struct vnic_ib_port *ibport;
+ char name[IFNAMSIZ];
+ u8 dgid[16];
+ __be16 pkey;
+ int rx_csum;
+ int tx_csum;
+ int heartbeat;
+ int ib_multicast;
+};
+
+struct vnic_ib_config {
+ __be64 service_id;
+ struct vnic_connection_data conn_data;
+ u32 retry_count;
+ u32 rnr_retry_count;
+ u8 min_rnr_timer;
+ u32 num_sends;
+ u32 num_recvs;
+ u32 recv_scatter; /* 1 */
+ u32 send_gather; /* 1 or 2 */
+ u32 completion_limit;
+};
+
+struct control_config {
+ struct vnic_ib_config ib_config;
+ u32 num_recvs;
+ u8 vnic_instance;
+ u16 max_address_entries;
+ u16 min_address_entries;
+ u32 rsp_timeout;
+ u32 ib_multicast;
+};
+
+struct data_config {
+ struct vnic_ib_config ib_config;
+ u64 path_id;
+ u32 num_recvs;
+ u32 host_recv_pool_entries;
+ struct vnic_recv_pool_config host_min;
+ struct vnic_recv_pool_config host_max;
+ struct vnic_recv_pool_config eioc_min;
+ struct vnic_recv_pool_config eioc_max;
+ u32 notify_bundle;
+};
+
+struct viport_config {
+ struct viport *viport;
+ struct control_config control_config;
+ struct data_config data_config;
+ struct vnic_ib_path_info path_info;
+ u32 sa_path_rec_get_timeout;
+ struct ib_device *ibdev;
+ u32 port;
+ u32 stats_interval;
+ u32 hb_interval;
+ u32 hb_timeout;
+ __be64 ioc_guid;
+ u8 ioc_string[MAX_IOC_STRING_LEN+1];
+ size_t path_idx;
+};
+
+/*
+ * primary_connect_timeout - if the secondary connects first,
+ * how long do we give the primary?
+ * primary_reconnect_timeout - same as above, but used when recovering
+ * from the case where both paths fail
+ * primary_switch_timeout - how long do we wait before switching to the
+ * primary when it comes back?
+ */
+struct vnic_config {
+ struct vnic *vnic;
+ char name[IFNAMSIZ];
+ u32 no_path_timeout;
+ u32 primary_connect_timeout;
+ u32 primary_reconnect_timeout;
+ u32 primary_switch_timeout;
+ int prefer_primary;
+ int use_rx_csum;
+ int use_tx_csum;
+};
+
+int config_start(void);
+struct viport_config *config_alloc_viport(struct path_param *params);
+struct vnic_config *config_alloc_vnic(void);
+char *config_viport_name(struct viport_config *config);
+
+#endif /* VNIC_CONFIG_H_INCLUDED */
next prev parent reply other threads:[~2008-04-30 17:19 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-30 17:15 [ofa-general] [PATCH 00/13] QLogic Virtual NIC (VNIC) Driver Ramachandra K
2008-04-30 17:16 ` [ofa-general] [PATCH 01/13] QLogic VNIC: Driver - netdev implementation Ramachandra K
2008-05-02 18:15 ` Roland Dreier
2008-05-05 15:36 ` [ofa-general] " Ramachandra K
2008-05-05 20:42 ` Roland Dreier
2008-04-30 17:16 ` [ofa-general] [PATCH 02/13] QLogic VNIC: Netpath - abstraction of connection to EVIC/VEx Ramachandra K
2008-04-30 17:17 ` [ofa-general] [PATCH 03/13] QLogic VNIC: Implementation of communication protocol with EVIC/VEx Ramachandra K
2008-04-30 17:17 ` [ofa-general] [PATCH 04/13] QLogic VNIC: Implementation of Control path of communication protocol Ramachandra K
2008-04-30 17:18 ` [ofa-general] [PATCH 05/13] QLogic VNIC: Implementation of Data " Ramachandra K
2008-04-30 17:18 ` [ofa-general] [PATCH 06/13] QLogic VNIC: IB core stack interaction Ramachandra K
2008-05-13 20:40 ` [ofa-general] " Roland Dreier
2008-04-30 17:19 ` Ramachandra K [this message]
2008-05-13 20:41 ` [PATCH 07/13] QLogic VNIC: Handling configurable parameters of the driver Roland Dreier
2008-04-30 17:19 ` [ofa-general] [PATCH 08/13] QLogic VNIC: sysfs interface implementation for " Ramachandra K
2008-05-01 14:56 ` Stephen Hemminger
2008-05-01 16:02 ` [ofa-general] " Kuchimanchi, Ramachandra (Contractor - )
2008-05-01 16:43 ` [ofa-general] [RESEND] " Ramachandra K
2008-05-01 18:22 ` [ofa-general] " Stephen Hemminger
2008-04-30 17:20 ` [ofa-general] [PATCH 09/13] QLogic VNIC: IB Multicast for Ethernet broadcast/multicast Ramachandra K
2008-05-15 22:38 ` Roland Dreier
2008-04-30 17:20 ` [ofa-general] [PATCH 10/13] QLogic VNIC: Driver Statistics collection Ramachandra K
2008-05-15 22:33 ` Roland Dreier
2008-05-20 16:52 ` [ofa-general] " Ramachandra K
2008-04-30 17:21 ` [PATCH 11/13] QLogic VNIC: Driver utility file - implements various utility macros Ramachandra K
2008-05-01 14:58 ` [ofa-general] " Stephen Hemminger
2008-05-01 16:18 ` [ofa-general] " Kuchimanchi, Ramachandra (Contractor - )
2008-05-01 17:01 ` Ramachandra K
2008-05-01 18:26 ` Stephen Hemminger
2008-04-30 17:21 ` [ofa-general] [PATCH 12/13] QLogic VNIC: Driver Kconfig and Makefile Ramachandra K
2008-05-15 22:31 ` Roland Dreier
2008-04-30 17:22 ` [ofa-general] [PATCH 13/13] QLogic VNIC: Modifications to IB " Ramachandra K
2008-04-30 22:25 ` [ofa-general] Re: [PATCH 00/13] QLogic Virtual NIC (VNIC) Driver Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080430171925.31725.22023.stgit@localhost.localdomain \
--to=ramachandra.kuchimanchi@qlogic.com \
--cc=amar.mudrankit@qlogic.com \
--cc=general@lists.openfabrics.org \
--cc=netdev@vger.kernel.org \
--cc=poornima.kamath@qlogic.com \
--cc=rdreier@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.