From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [2.6.25] lpfc driver problem
Date: Thu, 1 May 2008 21:16:59 -0700
Message-ID: <20080501211659.8a2e0686.akpm@linux-foundation.org>
References: <alpine.DEB.1.10.0804291625330.31652@mtl.rackplans.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner+glk-linux-kernel-3=40m.gmane.org-S1757375AbYEBETk@vger.kernel.org>
In-Reply-To: <alpine.DEB.1.10.0804291625330.31652@mtl.rackplans.net>
Sender: linux-kernel-owner@vger.kernel.org
To: Gerhard Mack <gmack@innerfire.net>
Cc: linux-kernel@vger.kernel.org, James Smart <James.Smart@Emulex.Com>, linux-scsi@vger.kernel.org
List-Id: linux-scsi@vger.kernel.org

On Tue, 29 Apr 2008 16:28:03 -0400 (EDT) Gerhard Mack <gmack@innerfire.net> wrote:

> hello
> 
> I'm getting the following error when trying to load the lpfc driver.  This 
> is a new install so I have no idea if this is a regression or not.
> 
> dmesg output:
> Emulex LightPulse Fibre Channel SCSI driver 8.2.5
> Copyright(c) 2004-2008 Emulex.  All rights reserved.
> scsi2 :  on PCI bus 02 device 50 irq 24
> lpfc 0000:02:0a.0: 0:0436 Adapter failed to init, timeout, status reg 
> x400000, FW Data: A8 x0 AC x0
> lpfc 0000:02:0a.0: 0:0436 Adapter failed to init, timeout, status reg 
> x400000, FW Data: A8 x0 AC x0
> 
> Card is:
> 02:0a.0 Fibre Channel: Emulex Corporation LP8000 Fibre Channel Host 
> Adapter (rev 02)
> 02:0a.0 0c04: 10df:f800 (rev 02)

(Cc's added)