From: Alon Bar-Lev <alon.barlev@gmail.com>
To: grub-devel@gnu.org
Subject: [PATCH/DRAFT] Support linux boot protocol >= 2.02 long command-lines
Date: Fri, 2 May 2008 19:36:01 +0300 [thread overview]
Message-ID: <200805021936.02614.alon.barlev@gmail.com> (raw)
Hello,
Continue from bug#13606 [1]
cmd_line_ptr should not be truncated to 256.
A draft patch is provided. I could not test it as grub-2 does not work in my VMWare (ATA) configuration.
It enters rescue prompt and when I set root (hd0, 1) I get "error: unknown device".
I tried adding many modules (lspci for example) but not see any command when typing help.
Please review this patch or apply something better.
For EFI I did not understand what the lh.cl_offset = 0 is for, but as only recent boot protocols are
supported I am not sure it is required.
Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
[1] https://savannah.gnu.org/bugs/?13606
---
diff -urNp grub-1.96.org/include/grub/i386/linux.h grub-1.96/include/grub/i386/linux.h
--- grub-1.96.org/include/grub/i386/linux.h 2007-07-21 21:22:34.000000000 +0300
+++ grub-1.96/include/grub/i386/linux.h 2008-05-02 19:18:15.000000000 +0300
@@ -41,7 +41,9 @@
#define GRUB_LINUX_CL_OFFSET 0x9000
#define GRUB_LINUX_CL_END_OFFSET 0x90FF
-#define GRUB_LINUX_SETUP_MOVE_SIZE 0x9100
+#define GRUB_LINUX_CL_0202_OFFSET 0x9100
+#define GRUB_LINUX_CL_0202_END_OFFSET 0x9FFF
+#define GRUB_LINUX_SETUP_MOVE_SIZE 0xA000
#define GRUB_LINUX_CL_MAGIC 0xA33F
#define GRUB_LINUX_EFI_SIGNATURE \
diff -urNp grub-1.96.org/loader/i386/efi/linux.c grub-1.96/loader/i386/efi/linux.c
--- grub-1.96.org/loader/i386/efi/linux.c 2007-07-22 00:09:47.000000000 +0300
+++ grub-1.96/loader/i386/efi/linux.c 2008-05-02 19:19:12.000000000 +0300
@@ -391,8 +391,8 @@ grub_rescue_cmd_linux (int argc, char *a
lh.type_of_loader = 0x50;
lh.cl_magic = GRUB_LINUX_CL_MAGIC;
- lh.cl_offset = GRUB_LINUX_CL_END_OFFSET;
- lh.cmd_line_ptr = (char *) real_mode_mem + GRUB_LINUX_CL_OFFSET;
+ lh.cl_offset = 0;
+ lh.cmd_line_ptr = (char *) real_mode_mem + GRUB_LINUX_CL_0202_OFFSET;
lh.ramdisk_image = 0;
lh.ramdisk_size = 0;
@@ -531,7 +531,7 @@ grub_rescue_cmd_linux (int argc, char *a
}
/* Specify the boot file. */
- dest = grub_stpcpy ((char *) real_mode_mem + GRUB_LINUX_CL_OFFSET,
+ dest = grub_stpcpy ((char *) real_mode_mem + GRUB_LINUX_CL_0202_OFFSET,
"BOOT_IMAGE=");
dest = grub_stpcpy (dest, argv[0]);
@@ -539,7 +539,7 @@ grub_rescue_cmd_linux (int argc, char *a
for (i = 1;
i < argc
&& dest + grub_strlen (argv[i]) + 1 < ((char *) real_mode_mem
- + GRUB_LINUX_CL_END_OFFSET);
+ + GRUB_LINUX_CL_0202_END_OFFSET);
i++)
{
*dest++ = ' ';
diff -urNp grub-1.96.org/loader/i386/pc/linux.c grub-1.96/loader/i386/pc/linux.c
--- grub-1.96.org/loader/i386/pc/linux.c 2008-01-12 02:31:55.000000000 +0200
+++ grub-1.96/loader/i386/pc/linux.c 2008-05-02 19:20:35.000000000 +0300
@@ -117,7 +117,7 @@ grub_rescue_cmd_linux (int argc, char *a
}
if (grub_le_to_cpu16 (lh.version) >= 0x0202)
- lh.cmd_line_ptr = grub_linux_real_addr + GRUB_LINUX_CL_OFFSET;
+ lh.cmd_line_ptr = grub_linux_real_addr + GRUB_LINUX_CL_OFFSET;
else
{
lh.cl_magic = grub_cpu_to_le16 (GRUB_LINUX_CL_MAGIC);
@@ -244,7 +244,7 @@ grub_rescue_cmd_linux (int argc, char *a
<< GRUB_DISK_SECTOR_BITS));
/* Specify the boot file. */
- dest = grub_stpcpy (grub_linux_tmp_addr + GRUB_LINUX_CL_OFFSET,
+ dest = grub_stpcpy (grub_linux_tmp_addr + GRUB_LINUX_CL_0202_OFFSET,
"BOOT_IMAGE=");
dest = grub_stpcpy (dest, argv[0]);
@@ -252,13 +252,18 @@ grub_rescue_cmd_linux (int argc, char *a
for (i = 1;
i < argc
&& dest + grub_strlen (argv[i]) + 1 < (grub_linux_tmp_addr
- + GRUB_LINUX_CL_END_OFFSET);
+ + GRUB_LINUX_CL_0202_END_OFFSET);
i++)
{
*dest++ = ' ';
dest = grub_stpcpy (dest, argv[i]);
}
+ grub_strncpy (grub_linux_tmp_addr + GRUB_LINUX_CL_OFFSET,
+ grub_linux_tmp_addr + GRUB_LINUX_CL_0202_OFFSET,
+ GRUB_LINUX_CL_END_OFFSET - GRUB_LINUX_CL_OFFSET - 1);
+ *(grub_linux_tmp_addr + GRUB_LINUX_CL_END_OFFSET) = '\0';
+
len = prot_size;
if (grub_file_read (file, (char *) GRUB_LINUX_BZIMAGE_ADDR, len) != len)
grub_error (GRUB_ERR_FILE_READ_ERROR, "Couldn't read file");
next reply other threads:[~2008-05-02 16:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-02 16:36 Alon Bar-Lev [this message]
2008-05-02 16:50 ` [PATCH/DRAFT] Support linux boot protocol >= 2.02 long command-lines Vesa Jääskeläinen
2008-05-02 16:59 ` Alon Bar-Lev
2008-05-02 17:07 ` Vesa Jääskeläinen
2008-05-02 17:17 ` Alon Bar-Lev
2008-05-02 18:04 ` Vesa Jääskeläinen
2008-05-02 18:10 ` Alon Bar-Lev
2008-05-02 18:27 ` Vesa Jääskeläinen
2008-05-02 19:03 ` Alon Bar-Lev
2008-05-02 19:44 ` Vesa Jääskeläinen
2008-05-02 20:28 ` Alon Bar-Lev
2008-05-02 20:48 ` Vesa Jääskeläinen
2008-05-02 21:04 ` Alon Bar-Lev
2008-05-02 21:17 ` Alon Bar-Lev
2008-05-02 21:39 ` [PATCH] " Alon Bar-Lev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805021936.02614.alon.barlev@gmail.com \
--to=alon.barlev@gmail.com \
--cc=grub-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.