From: Tony Lindgren <tony@atomide.com>
To: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Jarkko Nikula <jarkko.nikula@nokia.com>, linux-omap@vger.kernel.org
Subject: Re: [PATCH] ARM: OMAP: Enable TSC2301 drivers in N800 defconfig
Date: Fri, 2 May 2008 16:26:09 -0700 [thread overview]
Message-ID: <20080502232609.GB8981@atomide.com> (raw)
In-Reply-To: <20080428094833.GA4357@gandalf.research.nokia.com>
* Felipe Balbi <felipe.balbi@nokia.com> [080428 02:49]:
> On Mon, Apr 28, 2008 at 11:08:34AM +0300, Jarkko Nikula wrote:
> > Commit b11689b7a741b18d612ace8dac231a030f947b90 enable drivers for chips
> > used in Nokia N810 but disable drivers for TSC2301 which is used in N800.
> > This patch enable them back.
> >
> > Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
> Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Pushing today.
Tony
> > ---
> > arch/arm/configs/n800_defconfig | 136 ++++++++++++++++++++++++++-------------
> > 1 files changed, 91 insertions(+), 45 deletions(-)
> >
> > diff --git a/arch/arm/configs/n800_defconfig b/arch/arm/configs/n800_defconfig
> > index a8e133c..98b4db0 100644
> > --- a/arch/arm/configs/n800_defconfig
> > +++ b/arch/arm/configs/n800_defconfig
> > @@ -1,7 +1,7 @@
> > #
> > # Automatically generated make config: don't edit
> > -# Linux kernel version: 2.6.25-rc8-omap1
> > -# Tue Apr 8 15:34:27 2008
> > +# Linux kernel version: 2.6.25-omap1
> > +# Mon Apr 28 10:58:14 2008
> > #
> > CONFIG_ARM=y
> > CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> > @@ -148,7 +148,7 @@ CONFIG_CLASSIC_RCU=y
> > # CONFIG_ARCH_KS8695 is not set
> > # CONFIG_ARCH_NS9XXX is not set
> > # CONFIG_ARCH_MXC is not set
> > -# CONFIG_ARCH_ORION is not set
> > +# CONFIG_ARCH_ORION5X is not set
> > # CONFIG_ARCH_PNX4008 is not set
> > # CONFIG_ARCH_PXA is not set
> > # CONFIG_ARCH_RPC is not set
> > @@ -172,6 +172,8 @@ CONFIG_ARCH_OMAP2=y
> > # OMAP Feature Selections
> > #
> > CONFIG_OMAP_DEBUG_SRAM_PATCH=y
> > +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
> > +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
> > CONFIG_OMAP_RESET_CLOCKS=y
> > CONFIG_OMAP_BOOT_TAG=y
> > CONFIG_OMAP_BOOT_REASON=y
> > @@ -366,8 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
> > # CONFIG_TCP_MD5SIG is not set
> > # CONFIG_IP_VS is not set
> > # CONFIG_IPV6 is not set
> > -# CONFIG_INET6_XFRM_TUNNEL is not set
> > -# CONFIG_INET6_TUNNEL is not set
> > # CONFIG_NETLABEL is not set
> > # CONFIG_NETWORK_SECMARK is not set
> > CONFIG_NETFILTER=y
> > @@ -657,6 +657,7 @@ CONFIG_NETDEV_10000=y
> > #
> > # CONFIG_WLAN_PRE80211 is not set
> > # CONFIG_WLAN_80211 is not set
> > +# CONFIG_IWLWIFI_LEDS is not set
> >
> > #
> > # USB Network Adapters
> > @@ -713,6 +714,7 @@ CONFIG_INPUT_KEYBOARD=y
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_KEYBOARD_STOWAWAY is not set
> > # CONFIG_KEYBOARD_OMAP is not set
> > +CONFIG_KEYBOARD_TSC2301=y
> > CONFIG_KEYBOARD_LM8323=y
> > # CONFIG_KEYBOARD_GPIO is not set
> > # CONFIG_INPUT_MOUSE is not set
> > @@ -732,6 +734,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
> > CONFIG_TOUCHSCREEN_TSC2005=y
> > # CONFIG_TOUCHSCREEN_TSC2102 is not set
> > # CONFIG_TOUCHSCREEN_TSC210X is not set
> > +CONFIG_TOUCHSCREEN_TSC2301=y
> > # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> > # CONFIG_INPUT_MISC is not set
> >
> > @@ -784,13 +787,6 @@ CONFIG_I2C_BOARDINFO=y
> > # CONFIG_I2C_CHARDEV is not set
> >
> > #
> > -# I2C Algorithms
> > -#
> > -# CONFIG_I2C_ALGOBIT is not set
> > -# CONFIG_I2C_ALGOPCF is not set
> > -# CONFIG_I2C_ALGOPCA is not set
> > -
> > -#
> > # I2C Hardware Bus support
> > #
> > # CONFIG_I2C_GPIO is not set
> > @@ -801,6 +797,7 @@ CONFIG_I2C_OMAP=y
> > # CONFIG_I2C_TAOS_EVM is not set
> > # CONFIG_I2C_STUB is not set
> > # CONFIG_I2C_TINY_USB is not set
> > +# CONFIG_I2C_PCA_PLATFORM is not set
> >
> > #
> > # Miscellaneous I2C Chip support
> > @@ -845,7 +842,8 @@ CONFIG_SPI_OMAP24XX=y
> > # CONFIG_SPI_TSC2101 is not set
> > # CONFIG_SPI_TSC2102 is not set
> > # CONFIG_SPI_TSC210X is not set
> > -# CONFIG_SPI_TSC2301 is not set
> > +CONFIG_SPI_TSC2301=y
> > +CONFIG_SPI_TSC2301_AUDIO=y
> > # CONFIG_SPI_SPIDEV is not set
> > # CONFIG_SPI_TLE62X0 is not set
> > CONFIG_HAVE_GPIO_LIB=y
> > @@ -944,33 +942,51 @@ CONFIG_SSB_POSSIBLE=y
> > #
> > # CONFIG_MFD_SM501 is not set
> > # CONFIG_MFD_ASIC3 is not set
> > +# CONFIG_HTC_EGPIO is not set
> > +# CONFIG_HTC_PASIC3 is not set
> >
> > #
> > # Multimedia devices
> > #
> > CONFIG_VIDEO_DEV=y
> > CONFIG_VIDEO_V4L2_COMMON=y
> > -# CONFIG_VIDEO_V4L1 is not set
> > -# CONFIG_VIDEO_V4L1_COMPAT is not set
> > +CONFIG_VIDEO_ALLOW_V4L1=y
> > +CONFIG_VIDEO_V4L1_COMPAT=y
> > CONFIG_VIDEO_V4L2=y
> > +CONFIG_VIDEO_V4L1=y
> > CONFIG_VIDEO_CAPTURE_DRIVERS=y
> > # CONFIG_VIDEO_ADV_DEBUG is not set
> > CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
> > CONFIG_VIDEO_TCM825X=y
> > # CONFIG_VIDEO_VIVI is not set
> > +# CONFIG_VIDEO_CPIA is not set
> > +# CONFIG_VIDEO_CPIA2 is not set
> > # CONFIG_VIDEO_SAA5246A is not set
> > # CONFIG_VIDEO_SAA5249 is not set
> > +# CONFIG_TUNER_3036 is not set
> > +# CONFIG_VIDEO_AU0828 is not set
> > # CONFIG_VIDEO_OMAP_CAMERA is not set
> > CONFIG_VIDEO_OMAP2=y
> > CONFIG_V4L_USB_DRIVERS=y
> > # CONFIG_VIDEO_PVRUSB2 is not set
> > # CONFIG_VIDEO_EM28XX is not set
> > # CONFIG_VIDEO_USBVISION is not set
> > +# CONFIG_USB_VICAM is not set
> > +# CONFIG_USB_IBMCAM is not set
> > +# CONFIG_USB_KONICAWC is not set
> > +# CONFIG_USB_QUICKCAM_MESSENGER is not set
> > # CONFIG_USB_ET61X251 is not set
> > +# CONFIG_VIDEO_OVCAMCHIP is not set
> > +# CONFIG_USB_W9968CF is not set
> > +# CONFIG_USB_OV511 is not set
> > +# CONFIG_USB_SE401 is not set
> > # CONFIG_USB_SN9C102 is not set
> > +# CONFIG_USB_STV680 is not set
> > # CONFIG_USB_ZC0301 is not set
> > +# CONFIG_USB_PWC is not set
> > # CONFIG_USB_ZR364XX is not set
> > # CONFIG_USB_STKWEBCAM is not set
> > +# CONFIG_SOC_CAMERA is not set
> > CONFIG_RADIO_ADAPTERS=y
> > CONFIG_RADIO_TEA5761=y
> > # CONFIG_USB_DSBR is not set
> > @@ -1083,11 +1099,11 @@ CONFIG_SND_OMAP24XX_EAC=y
> > # CONFIG_SND_SOC is not set
> >
> > #
> > -# SoC Audio support for SuperH
> > +# ALSA SoC audio for Freescale SOCs
> > #
> >
> > #
> > -# ALSA SoC audio for Freescale SOCs
> > +# SoC Audio for the Texas Instruments OMAP
> > #
> >
> > #
> > @@ -1267,6 +1283,7 @@ CONFIG_LEDS_TRIGGER_TIMER=y
> > CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> > CONFIG_RTC_LIB=y
> > # CONFIG_RTC_CLASS is not set
> > +# CONFIG_UIO is not set
> >
> > #
> > # CBUS support
> > @@ -1304,7 +1321,6 @@ CONFIG_FS_MBCACHE=m
> > # CONFIG_JFS_FS is not set
> > # CONFIG_FS_POSIX_ACL is not set
> > # CONFIG_XFS_FS is not set
> > -# CONFIG_GFS2_FS is not set
> > # CONFIG_OCFS2_FS is not set
> > CONFIG_DNOTIFY=y
> > CONFIG_INOTIFY=y
> > @@ -1460,6 +1476,7 @@ CONFIG_SCHED_DEBUG=y
> > CONFIG_DEBUG_BUGVERBOSE=y
> > # CONFIG_DEBUG_INFO is not set
> > # CONFIG_DEBUG_VM is not set
> > +# CONFIG_DEBUG_WRITECOUNT is not set
> > # CONFIG_DEBUG_LIST is not set
> > # CONFIG_DEBUG_SG is not set
> > CONFIG_FRAME_POINTER=y
> > @@ -1484,48 +1501,77 @@ CONFIG_SECURITY=y
> > # CONFIG_SECURITY_LOWMEM is not set
> > CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
> > CONFIG_CRYPTO=y
> > -# CONFIG_CRYPTO_SEQIV is not set
> > +
> > +#
> > +# Crypto core or helper
> > +#
> > # CONFIG_CRYPTO_MANAGER is not set
> > +# CONFIG_CRYPTO_GF128MUL is not set
> > +# CONFIG_CRYPTO_NULL is not set
> > +# CONFIG_CRYPTO_CRYPTD is not set
> > +# CONFIG_CRYPTO_AUTHENC is not set
> > +# CONFIG_CRYPTO_TEST is not set
> > +
> > +#
> > +# Authenticated Encryption with Associated Data
> > +#
> > +# CONFIG_CRYPTO_CCM is not set
> > +# CONFIG_CRYPTO_GCM is not set
> > +# CONFIG_CRYPTO_SEQIV is not set
> > +
> > +#
> > +# Block modes
> > +#
> > +# CONFIG_CRYPTO_CBC is not set
> > +# CONFIG_CRYPTO_CTR is not set
> > +# CONFIG_CRYPTO_CTS is not set
> > +# CONFIG_CRYPTO_ECB is not set
> > +# CONFIG_CRYPTO_LRW is not set
> > +# CONFIG_CRYPTO_PCBC is not set
> > +# CONFIG_CRYPTO_XTS is not set
> > +
> > +#
> > +# Hash modes
> > +#
> > # CONFIG_CRYPTO_HMAC is not set
> > # CONFIG_CRYPTO_XCBC is not set
> > -# CONFIG_CRYPTO_NULL is not set
> > +
> > +#
> > +# Digest
> > +#
> > +# CONFIG_CRYPTO_CRC32C is not set
> > # CONFIG_CRYPTO_MD4 is not set
> > # CONFIG_CRYPTO_MD5 is not set
> > +# CONFIG_CRYPTO_MICHAEL_MIC is not set
> > # CONFIG_CRYPTO_SHA1 is not set
> > # CONFIG_CRYPTO_SHA256 is not set
> > # CONFIG_CRYPTO_SHA512 is not set
> > -# CONFIG_CRYPTO_WP512 is not set
> > # CONFIG_CRYPTO_TGR192 is not set
> > -# CONFIG_CRYPTO_GF128MUL is not set
> > -# CONFIG_CRYPTO_ECB is not set
> > -# CONFIG_CRYPTO_CBC is not set
> > -# CONFIG_CRYPTO_PCBC is not set
> > -# CONFIG_CRYPTO_LRW is not set
> > -# CONFIG_CRYPTO_XTS is not set
> > -# CONFIG_CRYPTO_CTR is not set
> > -# CONFIG_CRYPTO_GCM is not set
> > -# CONFIG_CRYPTO_CCM is not set
> > -# CONFIG_CRYPTO_CRYPTD is not set
> > -# CONFIG_CRYPTO_DES is not set
> > -# CONFIG_CRYPTO_FCRYPT is not set
> > -# CONFIG_CRYPTO_BLOWFISH is not set
> > -# CONFIG_CRYPTO_TWOFISH is not set
> > -# CONFIG_CRYPTO_SERPENT is not set
> > +# CONFIG_CRYPTO_WP512 is not set
> > +
> > +#
> > +# Ciphers
> > +#
> > # CONFIG_CRYPTO_AES is not set
> > +# CONFIG_CRYPTO_ANUBIS is not set
> > +# CONFIG_CRYPTO_ARC4 is not set
> > +# CONFIG_CRYPTO_BLOWFISH is not set
> > +# CONFIG_CRYPTO_CAMELLIA is not set
> > # CONFIG_CRYPTO_CAST5 is not set
> > # CONFIG_CRYPTO_CAST6 is not set
> > -# CONFIG_CRYPTO_TEA is not set
> > -# CONFIG_CRYPTO_ARC4 is not set
> > +# CONFIG_CRYPTO_DES is not set
> > +# CONFIG_CRYPTO_FCRYPT is not set
> > # CONFIG_CRYPTO_KHAZAD is not set
> > -# CONFIG_CRYPTO_ANUBIS is not set
> > -# CONFIG_CRYPTO_SEED is not set
> > # CONFIG_CRYPTO_SALSA20 is not set
> > +# CONFIG_CRYPTO_SEED is not set
> > +# CONFIG_CRYPTO_SERPENT is not set
> > +# CONFIG_CRYPTO_TEA is not set
> > +# CONFIG_CRYPTO_TWOFISH is not set
> > +
> > +#
> > +# Compression
> > +#
> > # CONFIG_CRYPTO_DEFLATE is not set
> > -# CONFIG_CRYPTO_MICHAEL_MIC is not set
> > -# CONFIG_CRYPTO_CRC32C is not set
> > -# CONFIG_CRYPTO_CAMELLIA is not set
> > -# CONFIG_CRYPTO_TEST is not set
> > -# CONFIG_CRYPTO_AUTHENC is not set
> > # CONFIG_CRYPTO_LZO is not set
> > CONFIG_CRYPTO_HW=y
> >
> > --
> > 1.5.4.4
>
> --
> - Balbi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-05-02 23:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-28 8:08 [PATCH 0/1] ARM: OMAP: Enable TSC2301 drivers in N800 defconfig Jarkko Nikula
2008-04-28 8:08 ` [PATCH] " Jarkko Nikula
2008-04-28 9:48 ` Felipe Balbi
2008-04-28 10:21 ` [PATCH] OMAP: EHCI: Wrong ehci init for 2430 Pandita, Vikram
2008-04-28 10:31 ` Felipe Balbi
2008-04-30 0:28 ` Tony Lindgren
2008-04-28 10:41 ` Felipe Balbi
2008-05-02 23:26 ` Tony Lindgren [this message]
2008-04-28 23:23 ` [PATCH 0/1] ARM: OMAP: Enable TSC2301 drivers in N800 defconfig Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080502232609.GB8981@atomide.com \
--to=tony@atomide.com \
--cc=felipe.balbi@nokia.com \
--cc=jarkko.nikula@nokia.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.