From: "Björn van der Meer" <bvdm@chronovault.net>
To: alsa-devel@alsa-project.org
Subject: Request for Realtek patch - Nvidia MCP51 HDA / ALC883 (10de:026c) Notebook component
Date: Mon, 5 May 2008 08:43:16 +0200 [thread overview]
Message-ID: <200805050843.16538.bvdm@chronovault.net> (raw)
Hello Everyone,
I have above component in my laptop and lack the expertise to add it to to
patch_realtek.c myself.
I think I have collected all the relevant information if one of the developers
wants to give it a try.
My Notebook: Medion 98300 (a.k.a. WAM2030)
(Please note: Medion is not an OEM. The board is nVidia based, OEM thought to
be Wistron. Apparently rarely used sound component?)
Internal speakers
Internal mic - unknown
three jacks: headphone, mic, SPDIF(dual use jack).
Jack Sensing under Windows.
5.1 surround (sounds like the setup should be supported by 3stack-6ch-dig)
lspci:
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: Wistron Corp. Unknown device [17c0:4079]
Flags: 66MHz, fast devsel, IRQ 20
Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0
Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
hwinfo:
22: PCI 10.1: 0403 Audio device
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_10de_26c
Unique ID: wRyD.X7XJ3rTjrR3
SysFS ID: /devices/pci0000:00/0000:00:10.1
SysFS BusID: 0000:00:10.1
Hardware Class: sound
Model: "Wistron MCP51 High Definition Audio"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x026c "MCP51 High Definition Audio"
SubVendor: pci 0x17c0 "Wistron Corp."
SubDevice: pci 0x4079
Revision: 0xa2
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xc0000000-0xc0003fff (rw,non-prefetchable)
IRQ: 20 (195693 events)
Module Alias: "pci:v000010DEd0000026Csv000017C0sd00004079bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
alsa-info.sh output is at http://pastebin.com/f49962c92.
Currently the only thing working is output via the internal speakers.
Thank you very much, B.
--
Björn van der Meer
bvdm@chronovault.net
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2008-05-05 6:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-05 6:43 Björn van der Meer [this message]
2008-05-08 16:44 ` Request for Realtek patch - Nvidia MCP51 HDA / ALC883 (10de:026c) Notebook component Takashi Iwai
2008-05-09 13:35 ` Björn van der Meer
2008-05-09 13:45 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2008-05-09 15:22 Björn van der Meer
2008-05-09 16:13 ` Tobin Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805050843.16538.bvdm@chronovault.net \
--to=bvdm@chronovault.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.