All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: linux-kernel@vger.kernel.org, linux-s390@vger.kernel.org
Cc: Roland McGrath <roland@redhat.com>,
	Martin Schwidefsky <schwidefsky@de.ibm.com>
Subject: [patch 6/8] compat ptrace cleanup
Date: Tue, 06 May 2008 17:50:33 +0200	[thread overview]
Message-ID: <20080506155112.277198997@de.ibm.com> (raw)
In-Reply-To: 20080506155027.974409738@de.ibm.com

[-- Attachment #1: 006-ptrace-compat.diff --]
[-- Type: text/plain, Size: 5852 bytes --]

From: Roland McGrath <roland@redhat.com>

This removes redundant arch code for generic ptrace requests
already handled by ptrace_request and compat_ptrace_request.
It simplifies things to just have the standard entry points,
and use the generic compat_sys_ptrace.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

 arch/s390/kernel/compat_wrapper.S |    2 
 arch/s390/kernel/ptrace.c         |  100 ++------------------------------------
 include/asm-s390/ptrace.h         |    2 
 3 files changed, 9 insertions(+), 95 deletions(-)

Index: quilt-2.6/arch/s390/kernel/compat_wrapper.S
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/compat_wrapper.S
+++ quilt-2.6/arch/s390/kernel/compat_wrapper.S
@@ -121,7 +121,7 @@ sys32_ptrace_wrapper:
 	lgfr	%r3,%r3			# long
 	llgtr	%r4,%r4			# long
 	llgfr	%r5,%r5			# long
-	jg	sys_ptrace		# branch to system call
+	jg	compat_sys_ptrace	# branch to system call
 
 	.globl	sys32_alarm_wrapper
 sys32_alarm_wrapper:
Index: quilt-2.6/arch/s390/kernel/ptrace.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/ptrace.c
+++ quilt-2.6/arch/s390/kernel/ptrace.c
@@ -292,8 +292,7 @@ poke_user(struct task_struct *child, add
 	return 0;
 }
 
-static int
-do_ptrace_normal(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	ptrace_area parea; 
 	int copied, ret;
@@ -529,35 +528,19 @@ poke_user_emu31(struct task_struct *chil
 	return 0;
 }
 
-static int
-do_ptrace_emu31(struct task_struct *child, long request, long addr, long data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	unsigned int tmp;  /* 4 bytes !! */
+	unsigned long addr = caddr;
+	unsigned long data = cdata;
 	ptrace_area_emu31 parea; 
 	int copied, ret;
 
 	switch (request) {
-	case PTRACE_PEEKTEXT:
-	case PTRACE_PEEKDATA:
-		/* read word at location addr. */
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		if (copied != sizeof(tmp))
-			return -EIO;
-		return put_user(tmp, (unsigned int __force __user *) data);
-
 	case PTRACE_PEEKUSR:
 		/* read the word at location addr in the USER area. */
 		return peek_user_emu31(child, addr, data);
 
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		/* write the word at location addr. */
-		tmp = data;
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1);
-		if (copied != sizeof(tmp))
-			return -EIO;
-		return 0;
-
 	case PTRACE_POKEUSR:
 		/* write the word at location addr in the USER area */
 		return poke_user_emu31(child, addr, data);
@@ -587,82 +570,11 @@ do_ptrace_emu31(struct task_struct *chil
 			copied += sizeof(unsigned int);
 		}
 		return 0;
-	case PTRACE_GETEVENTMSG:
-		return put_user((__u32) child->ptrace_message,
-				(unsigned int __force __user *) data);
-	case PTRACE_GETSIGINFO:
-		if (child->last_siginfo == NULL)
-			return -EINVAL;
-		return copy_siginfo_to_user32((compat_siginfo_t
-					       __force __user *) data,
-					      child->last_siginfo);
-	case PTRACE_SETSIGINFO:
-		if (child->last_siginfo == NULL)
-			return -EINVAL;
-		return copy_siginfo_from_user32(child->last_siginfo,
-						(compat_siginfo_t
-						 __force __user *) data);
 	}
-	return ptrace_request(child, request, addr, data);
+	return compat_ptrace_request(child, request, addr, data);
 }
 #endif
 
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	switch (request) {
-	case PTRACE_SYSCALL:
-		/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:
-		/* restart after signal. */
-		if (!valid_signal(data))
-			return -EIO;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* make sure the single step bit is not set. */
-		user_disable_single_step(child);
-		wake_up_process(child);
-		return 0;
-
-	case PTRACE_KILL:
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill. 
-		 * perhaps it should be put in the status that it wants to 
-		 * exit.
-		 */
-		if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-			return 0;
-		child->exit_code = SIGKILL;
-		/* make sure the single step bit is not set. */
-		user_disable_single_step(child);
-		wake_up_process(child);
-		return 0;
-
-	case PTRACE_SINGLESTEP:
-		/* set the trap flag. */
-		if (!valid_signal(data))
-			return -EIO;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		user_enable_single_step(child);
-		/* give it a chance to run. */
-		wake_up_process(child);
-		return 0;
-
-	/* Do requests that differ for 31/64 bit */
-	default:
-#ifdef CONFIG_COMPAT
-		if (test_thread_flag(TIF_31BIT))
-			return do_ptrace_emu31(child, request, addr, data);
-#endif
-		return do_ptrace_normal(child, request, addr, data);
-	}
-	/* Not reached.  */
-	return -EIO;
-}
-
 asmlinkage void
 syscall_trace(struct pt_regs *regs, int entryexit)
 {
Index: quilt-2.6/include/asm-s390/ptrace.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/ptrace.h
+++ quilt-2.6/include/asm-s390/ptrace.h
@@ -471,6 +471,8 @@ struct task_struct;
 extern void user_enable_single_step(struct task_struct *);
 extern void user_disable_single_step(struct task_struct *);
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
 #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
 #define regs_return_value(regs)((regs)->gprs[2])

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

  parent reply	other threads:[~2008-05-06 15:50 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-06 15:50 [patch 0/8] s390 patches for 2.6.26-rc1 Martin Schwidefsky
2008-05-06 15:50 ` [patch 1/8] s390: Optimize user and work TIF check Martin Schwidefsky
2008-05-06 15:50 ` [patch 2/8] s390-kvm: leave sie context on work. Removes preemption requirement Martin Schwidefsky
2008-05-06 15:50 ` [patch 3/8] cio: Remove cio_msg kernel parameter Martin Schwidefsky
2008-05-06 15:50 ` [patch 4/8] cio: Fix parsing mechanism for blacklisted devices Martin Schwidefsky
2008-05-06 15:50 ` [patch 5/8] s390mach compile warning Martin Schwidefsky
2008-05-06 15:50 ` Martin Schwidefsky [this message]
2008-05-06 15:50 ` [patch 7/8] tty3270: fix put_char fail/success conversion Martin Schwidefsky
2008-05-06 16:20   ` Alan Cox
2008-05-06 15:50 ` [patch 8/8] guest page hinting light Martin Schwidefsky
2008-05-06 19:47   ` Rik van Riel
2008-05-06 19:47     ` Rik van Riel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080506155112.277198997@de.ibm.com \
    --to=schwidefsky@de.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=roland@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.