From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Tue, 06 May 2008 14:40:29 +0000 Subject: Re: [lm-sensors] sensors.conf for the Supermicro PDSMi+ Message-Id: <20080506164029.6fce6197@hyperion.delvare> List-Id: References: <482051E8.605@caps-entreprise.com> In-Reply-To: <482051E8.605@caps-entreprise.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Romain, On Tue, 06 May 2008 14:41:12 +0200, Romain Dolbeau wrote: > Same device than the X7DBE, but used differently. I have a configuration file for this board as well: http://khali.linux-fr.org/devel/lm-sensors/sensors-Supermicro-PDSMi+.conf It seems that we agree on most settings, except: * -12V compute formula. Where did you get yours? Mine gives a better value on my system (which doesn't mean it's correct, of course.) * +5V and 5VSB compute formula. You cancel the 150 mV offset which the driver is adding on purpose. Why? Both values were OK on my system with the offset. * The connector for the 6th fan. I thought it was fan6 but you seem to believe it's fan7. My system only had 2 fans so I will trust you. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors