From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Tue, 06 May 2008 15:38:23 +0000 Subject: Re: [lm-sensors] sensors.conf for the Supermicro PDSMi+ Message-Id: <20080506173823.36d65db3@hyperion.delvare> List-Id: References: <482051E8.605@caps-entreprise.com> In-Reply-To: <482051E8.605@caps-entreprise.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Tue, 06 May 2008 17:12:38 +0200, Romain Dolbeau wrote: > Romain Dolbeau wrote: > > Jean Delvare wrote: > >> * The connector for the 6th fan. I thought it was fan6 but you seem to > >> believe it's fan7. My system only had 2 fans so I will trust you. > >=20 > > Mine have 3 in a 1U, I suspect this is a leftover from the X7DBE. >=20 > Fans are at 23, 25, 27, 29, 2B and 2F according to AllSuperD.ini, so it > seems I had done my homework properly back then :-) Hmm, do we have the same AllSuperD.ini file? Mine says: [Item] BusType=3D1 Item_Name=FAn6/CPU Fan Speed Comp_Name=FAn6/CPU Item_ID=3DItem_FAN6 Item_Cat=FAN ChipCode=11 Slave/ Offset- <-- ParaIndex1=3DDivisor6 ParaIndex2=FAN6H Monitor=3DTRUE Source=3D0 This is with file V.131 (10/06/06) - if you have a newer one, can you please send it to me in private? Thanks. --=20 Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors