From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Tue, 06 May 2008 16:00:33 +0000 Subject: Re: [lm-sensors] sensors.conf for the Supermicro PDSMi+ Message-Id: <20080506180033.54f9679c@hyperion.delvare> List-Id: References: <482051E8.605@caps-entreprise.com> In-Reply-To: <482051E8.605@caps-entreprise.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Tue, 6 May 2008 17:49:03 +0200, Jean Delvare wrote: > OK... there's this in the changelog: > > ;; 10/21/06: Change PDSMI+ Fan6 setting because Hardware Change > > That explains the difference. Also of interest is: ;; 01/08/07: Change System Temperature to Offset! for PDSMU, PDSM4+, PDSMA+, PDSML+, PDSMI+, PDSMI-LN4+ Which changes the System temperature from temp5 to temp6. This matches the fact that a BIOS update enabled temp6 on that board. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors