From: Christoph Lameter <clameter@sgi.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: travis@sgi.com, linux-kernel@vger.kernel.org
Cc: Adrian Bunk <bunk@kernel.org>
Subject: [patch 1/4] x86: e820.h unification
Date: Tue, 06 May 2008 12:33:53 -0700 [thread overview]
Message-ID: <20080506193402.332601060@sgi.com> (raw)
In-Reply-To: 20080506193352.225379637@sgi.com
[-- Attachment #1: e820_unify --]
[-- Type: text/plain, Size: 8926 bytes --]
The first patch simply puts both 32 and 64 bit headers into one header file.
The #ifdef sequence at the top is shared.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
---
include/asm-x86/e820.h | 103 +++++++++++++++++++++++++++++++++++++++++++++-
include/asm-x86/e820_32.h | 50 ----------------------
include/asm-x86/e820_64.h | 56 -------------------------
3 files changed, 101 insertions(+), 108 deletions(-)
Index: linux-2.6/include/asm-x86/e820.h
===================================================================
--- linux-2.6.orig/include/asm-x86/e820.h 2008-05-06 11:44:15.000000000 -0700
+++ linux-2.6/include/asm-x86/e820.h 2008-05-06 11:46:45.000000000 -0700
@@ -30,9 +30,108 @@ struct e820map {
#ifdef __KERNEL__
#ifdef CONFIG_X86_32
-# include "e820_32.h"
+/*
+ * structures and definitions for the int 15, ax=e820 memory map
+ * scheme.
+ *
+ * In a nutshell, arch/i386/boot/setup.S populates a scratch table
+ * in the empty_zero_block that contains a list of usable address/size
+ * duples. In arch/i386/kernel/setup.c, this information is
+ * transferred into the e820map, and in arch/i386/mm/init.c, that
+ * new information is used to mark pages reserved or not.
+ *
+ */
+#include <linux/ioport.h>
+
+#define HIGH_MEMORY (1024*1024)
+
+#ifndef __ASSEMBLY__
+
+extern void setup_memory_map(void);
+extern void finish_e820_parsing(void);
+
+extern struct e820map e820;
+extern void update_e820(void);
+
+extern int e820_all_mapped(unsigned long start, unsigned long end,
+ unsigned type);
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern void propagate_e820_map(void);
+extern void register_bootmem_low_pages(unsigned long max_low_pfn);
+extern void add_memory_region(unsigned long long start,
+ unsigned long long size, int type);
+extern u64 update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
+extern void e820_register_memory(void);
+extern void limit_regions(unsigned long long size);
+extern void print_memory_map(char *who);
+extern void init_iomem_resources(struct resource *code_resource,
+ struct resource *data_resource,
+ struct resource *bss_resource);
+
+#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
+extern void e820_mark_nosave_regions(void);
#else
-# include "e820_64.h"
+static inline void e820_mark_nosave_regions(void)
+{
+}
+#endif
+
+
+#endif/*!__ASSEMBLY__*/
+#else /* X86_32 */
+/*
+ * structures and definitions for the int 15, ax=e820 memory map
+ * scheme.
+ *
+ * In a nutshell, setup.S populates a scratch table in the
+ * empty_zero_block that contains a list of usable address/size
+ * duples. setup.c, this information is transferred into the e820map,
+ * and in init.c/numa.c, that new information is used to mark pages
+ * reserved or not.
+ */
+#include <linux/ioport.h>
+
+#ifndef __ASSEMBLY__
+extern unsigned long find_e820_area(unsigned long start, unsigned long end,
+ unsigned long size, unsigned long align);
+extern unsigned long find_e820_area_size(unsigned long start,
+ unsigned long *sizep,
+ unsigned long align);
+extern void add_memory_region(unsigned long start, unsigned long size,
+ int type);
+extern u64 update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
+extern void setup_memory_region(void);
+extern void contig_e820_setup(void);
+extern unsigned long e820_end_of_ram(void);
+extern void e820_reserve_resources(void);
+extern void e820_mark_nosave_regions(void);
+extern int e820_any_mapped(unsigned long start, unsigned long end,
+ unsigned type);
+extern int e820_all_mapped(unsigned long start, unsigned long end,
+ unsigned type);
+extern int e820_any_non_reserved(unsigned long start, unsigned long end);
+extern int is_memory_any_valid(unsigned long start, unsigned long end);
+extern int e820_all_non_reserved(unsigned long start, unsigned long end);
+extern int is_memory_all_valid(unsigned long start, unsigned long end);
+extern unsigned long e820_hole_size(unsigned long start, unsigned long end);
+
+extern void e820_setup_gap(void);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+
+extern void finish_e820_parsing(void);
+
+extern struct e820map e820;
+extern void update_e820(void);
+
+extern void reserve_early(unsigned long start, unsigned long end, char *name);
+extern void free_early(unsigned long start, unsigned long end);
+extern void early_res_to_bootmem(unsigned long start, unsigned long end);
+
+#endif/*!__ASSEMBLY__*/
+
#endif
#endif /* __KERNEL__ */
Index: linux-2.6/include/asm-x86/e820_32.h
===================================================================
--- linux-2.6.orig/include/asm-x86/e820_32.h 2008-05-06 11:44:15.000000000 -0700
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,50 +0,0 @@
-/*
- * structures and definitions for the int 15, ax=e820 memory map
- * scheme.
- *
- * In a nutshell, arch/i386/boot/setup.S populates a scratch table
- * in the empty_zero_block that contains a list of usable address/size
- * duples. In arch/i386/kernel/setup.c, this information is
- * transferred into the e820map, and in arch/i386/mm/init.c, that
- * new information is used to mark pages reserved or not.
- *
- */
-#ifndef __E820_HEADER
-#define __E820_HEADER
-
-#include <linux/ioport.h>
-
-#define HIGH_MEMORY (1024*1024)
-
-#ifndef __ASSEMBLY__
-
-extern struct e820map e820;
-extern void update_e820(void);
-
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_any_mapped(u64 start, u64 end, unsigned type);
-extern void propagate_e820_map(void);
-extern void register_bootmem_low_pages(unsigned long max_low_pfn);
-extern void add_memory_region(unsigned long long start,
- unsigned long long size, int type);
-extern void update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
-extern void e820_register_memory(void);
-extern void limit_regions(unsigned long long size);
-extern void print_memory_map(char *who);
-extern void init_iomem_resources(struct resource *code_resource,
- struct resource *data_resource,
- struct resource *bss_resource);
-
-#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
-extern void e820_mark_nosave_regions(void);
-#else
-static inline void e820_mark_nosave_regions(void)
-{
-}
-#endif
-
-
-#endif/*!__ASSEMBLY__*/
-#endif/*__E820_HEADER*/
Index: linux-2.6/include/asm-x86/e820_64.h
===================================================================
--- linux-2.6.orig/include/asm-x86/e820_64.h 2008-05-06 11:44:15.000000000 -0700
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,56 +0,0 @@
-/*
- * structures and definitions for the int 15, ax=e820 memory map
- * scheme.
- *
- * In a nutshell, setup.S populates a scratch table in the
- * empty_zero_block that contains a list of usable address/size
- * duples. setup.c, this information is transferred into the e820map,
- * and in init.c/numa.c, that new information is used to mark pages
- * reserved or not.
- */
-#ifndef __E820_HEADER
-#define __E820_HEADER
-
-#include <linux/ioport.h>
-
-#ifndef __ASSEMBLY__
-extern unsigned long find_e820_area(unsigned long start, unsigned long end,
- unsigned long size, unsigned long align);
-extern unsigned long find_e820_area_size(unsigned long start,
- unsigned long *sizep,
- unsigned long align);
-extern void add_memory_region(unsigned long start, unsigned long size,
- int type);
-extern void update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
-extern void setup_memory_region(void);
-extern void contig_e820_setup(void);
-extern unsigned long e820_end_of_ram(void);
-extern void e820_reserve_resources(void);
-extern void e820_mark_nosave_regions(void);
-extern int e820_any_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_any_non_reserved(unsigned long start, unsigned long end);
-extern int is_memory_any_valid(unsigned long start, unsigned long end);
-extern int e820_all_non_reserved(unsigned long start, unsigned long end);
-extern int is_memory_all_valid(unsigned long start, unsigned long end);
-extern unsigned long e820_hole_size(unsigned long start, unsigned long end);
-
-extern void e820_setup_gap(void);
-extern void e820_register_active_regions(int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-
-extern void finish_e820_parsing(void);
-
-extern struct e820map e820;
-extern void update_e820(void);
-
-extern void reserve_early(unsigned long start, unsigned long end, char *name);
-extern void free_early(unsigned long start, unsigned long end);
-extern void early_res_to_bootmem(unsigned long start, unsigned long end);
-
-#endif/*!__ASSEMBLY__*/
-
-#endif/*__E820_HEADER*/
--
next prev parent reply other threads:[~2008-05-06 19:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-06 19:33 [patch 0/4] [PATCH] x86: Merge e820_32/64 V2 Christoph Lameter
2008-05-06 19:33 ` Christoph Lameter [this message]
2008-05-06 19:33 ` [patch 2/4] x86: e820 unification: Extract shared comments Christoph Lameter
2008-05-06 19:33 ` [patch 3/4] x86: e820 unification: Common #ifdef __ASSEMBLY Christoph Lameter
2008-05-06 19:33 ` [patch 4/4] x86: e820 unification: Extract common functions Christoph Lameter
-- strict thread matches above, loose matches on Subject: below --
2008-05-05 19:02 [patch 0/4] [PATCH] x86: Merge e820_32/64 Christoph Lameter
2008-05-05 19:02 ` [patch 1/4] x86: e820.h unification Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080506193402.332601060@sgi.com \
--to=clameter@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.