From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 2/2] add MPC8343 based board mvBlueLYNX-M7
Date: Tue, 6 May 2008 22:06:29 +0200 [thread overview]
Message-ID: <20080506200629.GC15533@game.jcrosoft.org> (raw)
In-Reply-To: <48207061.2060102@matrix-vision.de>
> + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz at matrix-vision.de
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <ACEX1K.h>
> +#include <command.h>
> +#include "fpga.h"
> +#include "mvblm7.h"
> +
> +#ifdef CONFIG_FPGA
Please move it to the Makefile
> +
> +#ifdef FPGA_DEBUG
> +#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args)
> +#else
> +#define fpga_debug(fmt, args...)
> +#endif
> +
> +Altera_CYC2_Passive_Serial_fns altera_fns = {
> + fpga_null_fn,
> + fpga_config_fn,
> + fpga_status_fn,
> + fpga_done_fn,
> + fpga_wr_fn,
> + fpga_null_fn,
> + fpga_null_fn,
> + 0
> +};
> +
> +Altera_desc cyclone2 = {
> + Altera_CYC2,
> + passive_serial,
> + Altera_EP2C20_SIZE,
> + (void *) &altera_fns,
> + NULL,
> + 0
> +};
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int mvblm7_init_fpga(void)
> +{
> + fpga_debug("Initialize FPGA interface (reloc 0x%.8lx)\n",
> + gd->reloc_off);
> + fpga_init(gd->reloc_off);
> + fpga_add(fpga_altera, &cyclone2);
> + fpga_config_fn(0, 1, 0);
> + udelay(60);
> +
> + return 1;
> +}
> +
> +int fpga_null_fn(int cookie)
> +{
> + return 0;
> +}
> +
> +int fpga_config_fn(int assert, int flush, int cookie)
> +{
> + volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
> + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
please remove empty line
> +
> + u32 dvo = gpio->dat;
please add empty line
> + fpga_debug("SET config : %s\n", assert ? "low" : "high");
> + if (assert)
> + dvo |= FPGA_CONFIG;
> + else
> + dvo &= ~FPGA_CONFIG;
> +
> + if (flush)
> + gpio->dat = dvo;
> +
> + return assert;
> +}
> +
> +int fpga_done_fn(int cookie)
> +{
> + volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
> + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
> + int result = 0;
> +
> + udelay(10);
> + fpga_debug("CONF_DONE check ... ");
> + if (gpio->dat & FPGA_CONF_DONE) {
> + fpga_debug("high\n");
> + result = 1;
> + } else
> + fpga_debug("low\n");
> +
> + return result;
> +}
> +
> +int fpga_status_fn(int cookie)
> +{
> + volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
> + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
> + int result = 0;
> +
> + fpga_debug("STATUS check ... ");
> + if (gpio->dat & FPGA_STATUS) {
> + fpga_debug("high\n");
> + result = 1;
> + } else
> + fpga_debug("low\n");
> +
> + return result;
> +}
> +
> +int fpga_clk_fn(int assert_clk, int flush, int cookie)
> +{
> + volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
> + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
please remove empty line
> +
> + u32 dvo = gpio->dat;
please add empty line
> + fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low");
> + if (assert_clk)
> + dvo |= FPGA_CCLK;
> + else
> + dvo &= ~FPGA_CCLK;
> +
> + if (flush)
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <ioports.h>
> +#include <mpc83xx.h>
> +#include <asm/mpc8349_pci.h>
> +#include <pci.h>
> +#include <asm/mmu.h>
> +#if defined(CONFIG_OF_LIBFDT)
> +#include <libfdt.h>
> +#endif
> +
> +#include "mvblm7.h"
> +
> +int fixed_sdram(void)
> +{
> + volatile immap_t *im = (immap_t *)CFG_IMMR;
> + u32 msize = 0;
> + u32 ddr_size;
> + u32 ddr_size_log2;
> +
> + msize = CFG_DDR_SIZE;
> + for (ddr_size = msize << 20, ddr_size_log2 = 0;
> + (ddr_size > 1);
> + ddr_size = ddr_size>>1, ddr_size_log2++) {
^ ^
please add space
> + if (ddr_size & 1)
> + return -1;
> + }
> + im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
> + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
> + LAWAR_SIZE);
> + *e++ = strlen(ptr);
> + while (*ptr)
> + *e++ = *ptr++;
> + }
> + /* DHCP_CLIENT_IDENTIFIER = 61 */
> + ptr = getenv("dhcp_client_id");
> + if (ptr) {
> + *e++ = 61;
> + *e++ = strlen(ptr);
> + while (*ptr)
> + *e++ = *ptr++;
> + }
> +
> + return e;
> +}
> +
> + data_size = (size_t)simple_strtoul(sizestr, NULL, 16);
> +
> + return fpga_load(0, fpga_data, data_size);
> +}
> +
> +static struct pci_region pci_regions[] = {
> + {
> + bus_start: CFG_PCI1_MEM_BASE,
> + phys_start: CFG_PCI1_MEM_PHYS,
> + size: CFG_PCI1_MEM_SIZE,
> + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
> + },
> + {
> + bus_start: CFG_PCI1_MMIO_BASE,
> + phys_start: CFG_PCI1_MMIO_PHYS,
> + size: CFG_PCI1_MMIO_SIZE,
> + flags: PCI_REGION_MEM
> + },
> + {
> + bus_start: CFG_PCI1_IO_BASE,
> + phys_start: CFG_PCI1_IO_PHYS,
> + size: CFG_PCI1_IO_SIZE,
> + flags: PCI_REGION_IO
> + }
> +};
> +
> +void pci_init_board(void)
> +{
> + char *s;
> + int i, warmboot, load_fpga=0;
Please split it
> + volatile immap_t *immr;
Best Regards,
J.
next prev parent reply other threads:[~2008-05-06 20:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4820147A.4050401@matrix-vision.de>
[not found] ` <20080506092606.05828286.kim.phillips@freescale.com>
2008-05-06 14:50 ` [U-Boot-Users] [PATCH 1/2] add MPC8343 based board mvBlueLYNX-M7 Andre Schwarz
2008-05-09 20:50 ` Wolfgang Denk
2008-05-06 14:51 ` [U-Boot-Users] [PATCH 2/2] " Andre Schwarz
2008-05-06 20:06 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2008-05-07 10:01 ` André Schwarz
2008-05-07 15:36 ` Kim Phillips
2008-05-08 19:49 ` Kim Phillips
2008-05-27 8:44 ` Andre Schwarz
2008-05-28 1:16 ` Kim Phillips
2008-06-10 7:14 Andre Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080506200629.GC15533@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.