From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] ide: remove ->mmio flag from ide_hwif_t
Date: Wed, 7 May 2008 19:45:11 +0200 [thread overview]
Message-ID: <200805071945.11304.bzolnier@gmail.com> (raw)
Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup()
and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely
remove ->mmio flag.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/arm/palm_bk3710.c | 1 -
drivers/ide/ide-dma.c | 2 +-
drivers/ide/pci/scc_pata.c | 1 -
drivers/ide/pci/siimage.c | 25 +++++++++++++------------
drivers/ide/setup-pci.c | 4 ++--
include/linux/ide.h | 1 -
6 files changed, 16 insertions(+), 18 deletions(-)
Index: b/drivers/ide/arm/palm_bk3710.c
===================================================================
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -402,7 +402,6 @@ static int __devinit palm_bk3710_probe(s
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
- hwif->mmio = 1;
default_hwif_mmiops(hwif);
idx[0] = i;
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -463,7 +463,7 @@ int ide_dma_setup(ide_drive_t *drive)
}
/* PRD table */
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
writel(hwif->dmatable_dma,
(void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
else
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -793,7 +793,6 @@ static void __devinit init_mmio_iops_scc
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
- hwif->mmio = 1;
}
/**
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -94,7 +94,7 @@ static unsigned long siimage_selreg(ide_
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
base += hwif->channel << 6;
else
base += hwif->channel << 4;
@@ -117,7 +117,7 @@ static inline unsigned long siimage_seld
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
base += hwif->channel << 6;
else
base += hwif->channel << 4;
@@ -190,7 +190,9 @@ static u8 sil_pata_udma_filter(ide_drive
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc, mask = 0;
- scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
+ base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
+
+ scsc = sil_ioread8(dev, base);
switch (scsc & 0x30) {
case 0x10: /* 133 */
@@ -238,8 +240,9 @@ static void sil_set_pio_mode(ide_drive_t
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 tf_pio = pio;
- u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84)
- : (hwif->mmio ? 0xB4 : 0x80);
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
+ : (mmio ? 0xB4 : 0x80);
u8 mode = 0;
u8 unit = drive->select.b.unit;
@@ -290,13 +293,13 @@ static void sil_set_dma_mode(ide_drive_t
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
- u8 scsc = 0, addr_mask = hwif->channel ?
- (hwif->mmio ? 0xF4 : 0x84) :
- (hwif->mmio ? 0xB4 : 0x80);
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
+ : (mmio ? 0xB4 : 0x80);
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
- scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A));
+ scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
mode = sil_ioread8 (dev, base + addr_mask);
multi = sil_ioread16(dev, ma);
ultra = sil_ioread16(dev, ua);
@@ -391,7 +394,7 @@ static int siimage_mmio_dma_test_irq(ide
static int siimage_dma_test_irq(ide_drive_t *drive)
{
- if (drive->hwif->mmio)
+ if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
return siimage_mmio_dma_test_irq(drive);
else
return siimage_io_dma_test_irq(drive);
@@ -640,8 +643,6 @@ static void __devinit init_mmio_iops_sii
hwif->irq = dev->irq;
hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
-
- hwif->mmio = 1;
}
static int is_dev_seagate_sata(ide_drive_t *drive)
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -87,7 +87,7 @@ unsigned long ide_pci_dma_base(ide_hwif_
unsigned long dma_base = 0;
u8 dma_stat = 0;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
return hwif->dma_base;
if (hwif->mate && hwif->mate->dma_base) {
@@ -374,7 +374,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif,
if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
return -1;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
else
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -517,7 +517,6 @@ typedef struct hwif_s {
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
- unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
struct device *portdev;
reply other threads:[~2008-05-07 17:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805071945.11304.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.