All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@caiaq.org>
To: alsa-devel@alsa-project.org
Subject: Re: [PATCH] snd_usb_caiaq: add support for "Session	I/O" interface
Date: Thu, 8 May 2008 13:47:07 +0200	[thread overview]
Message-ID: <20080508114707.GB8677@buzzloop.caiaq.de> (raw)
In-Reply-To: <20080508112613.GA8677@buzzloop.caiaq.de>

[-- Attachment #1: Type: text/plain, Size: 308 bytes --]

On Thu, May 08, 2008 at 01:26:13PM +0200, Daniel Mack wrote:
> this patch adds support for "Session I/O". As it certainly won't break
> anything it could still go for 2.6.26, right?

Forgot to enable high sample rates for this device in my previous patch.
Use the one attached to this mail instead.

Daniel


[-- Attachment #2: alsa-usb-caiaq-1.3.8.diff --]
[-- Type: text/x-diff, Size: 2383 bytes --]

This patch adds suport for Native Instruments new 
"Guitar Rig Session I/O" audio hardware.

Signed-off-by: Daniel Mack <daniel@caiaq.de>

diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c
index 24970a5..b3a6033 100644
--- a/sound/usb/caiaq/caiaq-audio.c
+++ b/sound/usb/caiaq/caiaq-audio.c
@@ -637,6 +637,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 	switch (dev->chip.usb_id) {
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO):
 		dev->samplerates |= SNDRV_PCM_RATE_88200;
 		dev->samplerates |= SNDRV_PCM_RATE_192000;
 		break;
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
index e97d8b2..8ae5134 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -42,14 +42,15 @@
 #endif
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.6");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.8");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
 			 "{Native Instruments, Kore Controller},"
 			 "{Native Instruments, Kore Controller 2},"
-			 "{Native Instruments, Audio Kontrol 1}"
-			 "{Native Instruments, Audio 8 DJ}}");
+			 "{Native Instruments, Audio Kontrol 1},"
+			 "{Native Instruments, Audio 8 DJ},"
+			 "{Native Instruments, Session I/O}}");
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
 static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
@@ -110,6 +111,11 @@ static struct usb_device_id snd_usb_id_table[] = {
 		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
 		.idProduct =    USB_PID_AUDIO8DJ
 	},
+	{
+		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =    USB_PID_SESSIONIO
+	},
 	{ /* terminator */ }
 };
 
diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h
index 9382d13..99e8a07 100644
--- a/sound/usb/caiaq/caiaq-device.h
+++ b/sound/usb/caiaq/caiaq-device.h
@@ -11,6 +11,7 @@
 #define USB_PID_KORECONTROLLER2	0x4712
 #define USB_PID_AK1		0x0815
 #define USB_PID_AUDIO8DJ	0x1978
+#define USB_PID_SESSIONIO	0x1915
 
 #define EP1_BUFSIZE 64
 #define CAIAQ_USB_STR_LEN 0xff

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2008-05-08 11:47 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-08 11:26 [PATCH] snd_usb_caiaq: add support for "Session I/O" interface Daniel Mack
2008-05-08 11:47 ` Daniel Mack [this message]
2008-05-08 13:46 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080508114707.GB8677@buzzloop.caiaq.de \
    --to=daniel@caiaq.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.