From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC method
Date: Thu, 8 May 2008 21:35:27 +0200 [thread overview]
Message-ID: <200805082135.27591.bzolnier@gmail.com> (raw)
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-io.c | 2 +-
drivers/ide/ide-iops.c | 18 +++++++++---------
drivers/ide/ide-probe.c | 6 +++---
drivers/ide/ide-taskfile.c | 2 +-
drivers/ide/pci/scc_pata.c | 5 +----
drivers/ide/ppc/pmac.c | 6 +++---
drivers/scsi/ide-scsi.c | 2 +-
include/linux/ide.h | 2 +-
8 files changed, 20 insertions(+), 23 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -437,7 +437,7 @@ static ide_startstop_t ide_atapi_error(i
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
hwif->io_ports.command_addr);
if (rq->errors >= ERROR_MAX) {
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -42,7 +42,7 @@ static void ide_outb (u8 val, unsigned l
outb(val, port);
}
-static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port)
+static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
{
outb(addr, port);
}
@@ -68,7 +68,7 @@ static void ide_mm_outb (u8 value, unsig
writeb(value, (void __iomem *) port);
}
-static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
+static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
{
writeb(value, (void __iomem *) port);
}
@@ -686,7 +686,7 @@ int ide_driveid_update(ide_drive_t *driv
SELECT_MASK(drive, 1);
ide_set_irq(drive, 1);
msleep(50);
- hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, WIN_IDENTIFY, hwif->io_ports.command_addr);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
@@ -773,7 +773,7 @@ int ide_config_drive_speed(ide_drive_t *
ide_set_irq(drive, 0);
hwif->OUTB(speed, io_ports->nsect_addr);
hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, WIN_SETFEATURES, io_ports->command_addr);
if (drive->quirk_list == 2)
ide_set_irq(drive, 1);
@@ -881,7 +881,7 @@ void ide_execute_command(ide_drive_t *dr
spin_lock_irqsave(&ide_lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
- hwif->OUTBSYNC(drive, cmd, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
@@ -899,7 +899,7 @@ void ide_execute_pkt_cmd(ide_drive_t *dr
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, WIN_PACKETCMD, hwif->io_ports.command_addr);
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
}
@@ -1094,7 +1094,7 @@ static ide_startstop_t do_reset1 (ide_dr
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
- hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
ndelay(400);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
@@ -1125,14 +1125,14 @@ static ide_startstop_t do_reset1 (ide_dr
* recover from reset very quickly, saving us the first 50ms wait time.
*/
/* set SRST and nIEN */
- hwif->OUTBSYNC(drive, drive->ctl|6, io_ports->ctl_addr);
+ hwif->OUTBSYNC(hwif, drive->ctl | 6, io_ports->ctl_addr);
/* more than enough time */
udelay(10);
if (drive->quirk_list == 2)
ctl = drive->ctl; /* clear SRST and nIEN */
else
ctl = drive->ctl | 2; /* clear SRST, leave nIEN */
- hwif->OUTBSYNC(drive, ctl, io_ports->ctl_addr);
+ hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_d
hwif->OUTB(0, io_ports->feature_addr);
/* ask drive for ID */
- hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -480,7 +480,7 @@ static int do_probe (ide_drive_t *drive,
msleep(50);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *dr
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -117,7 +117,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
switch (task->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
- hwif->OUTBSYNC(drive, tf->command, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(hwif, tf->command, hwif->io_ports.command_addr);
ndelay(400); /* FIXME */
return pre_task_out_intr(drive, task->rq);
case TASKFILE_MULTI_IN:
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -148,11 +148,8 @@ static void scc_ide_outb(u8 addr, unsign
out_be32((void*)port, addr);
}
-static void
-scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
+static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
{
- ide_hwif_t *hwif = HWIF(drive);
-
out_be32((void*)port, addr);
eieio();
in_be32((void*)(hwif->dma_base + 0x01c));
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -481,13 +481,13 @@ pmac_ide_do_update_timings(ide_drive_t *
pmac_ide_selectproc(drive);
}
-static void
-pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port)
+static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
{
u32 tmp;
writeb(value, (void __iomem *) port);
- tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
+ tmp = readl((void __iomem *)(hwif->io_ports.data_addr
+ + IDE_TIMING_CONFIG));
}
/*
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -257,7 +257,7 @@ idescsi_atapi_error(ide_drive_t *drive,
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
hwif->io_ports.command_addr);
rq->errors++;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -478,7 +478,7 @@ typedef struct hwif_s {
void (*ide_dma_clear_irq)(ide_drive_t *drive);
void (*OUTB)(u8 addr, unsigned long port);
- void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
+ void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port);
u8 (*INB)(unsigned long port);
reply other threads:[~2008-05-08 19:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805082135.27591.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.