[U-Boot-Users] [PATCH 16/26] AT91SAM9263EK support [part 2 of 2]

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 703784e..e5733f6 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -417,13 +417,15 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
>  
>  	/* choose RMII or MII mode. This depends on the board */
>  #ifdef CONFIG_RMII
> -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
> +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
> +    defined(CONFIG_AT91SAM9263)
Could we found a better CONFIG than add all board?
>  	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
>  #else
>  	macb_writel(macb, USRIO, 0);
>  #endif
>  #else
> -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
> +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
> +    defined(CONFIG_AT91SAM9263)

>  	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
>  #else
>  	macb_writel(macb, USRIO, MACB_BIT(MII));
> diff --git a/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/* ARM asynchronous clock */
> +#define AT91_MAIN_CLOCK		199919000	/* from 16.367 MHz crystal */
> +#define AT91_MASTER_CLOCK	99959500	/* peripheral = main / 2 */
> +#define CFG_HZ			1000000		/* 1us resolution */
> +
> +#define AT91_SLOW_CLOCK		32768	/* slow clock */
> +
> +#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
> +#define CONFIG_AT91SAM9263	1	/* It's an Atmel AT91SAM9263 SoC*/
> +#define CONFIG_AT91SAM9263EK	1	/* on an AT91SAM9263EK Board	*/
> +#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
> +
> +#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
> +#define CONFIG_SETUP_MEMORY_TAGS 1
> +#define CONFIG_INITRD_TAG	1
> +
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#define CONFIG_SKIP_RELOCATE_UBOOT
> +
> +/*
> + * Hardware drivers
> + */
> +#define CONFIG_ATMEL_USART	1
> +#undef CONFIG_USART0
> +#undef CONFIG_USART1
> +#undef CONFIG_USART2
> +#define CONFIG_USART3		1	/* USART 3 is DBGU */
> +
> +#define CONFIG_BOOTDELAY	3
> +
> +/* #define CONFIG_ENV_OVERWRITE	1 */
Same as before if no need please remove

Best Regards,
J.