All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rick Vernam <rickv@hobi.com>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [4438] temporary hack to handle register shortage with dyngen for qemu_st64 ()
Date: Mon, 12 May 2008 10:53:37 -0500	[thread overview]
Message-ID: <200805121053.37322.rickv@hobi.com> (raw)
In-Reply-To: <E1JvYOy-0001q9-0n@cvs.savannah.gnu.org>

First, thanks to all for your time & energy...
I saw all the changes, and decided to take it for a spin.
(and yes, I know gcc4 is not 'supported' ...)
It fails to compile in target-i386/translate.c ...
I poked around a bit, but to no avail.
Perhaps you knew about this, in which case sorry for the noise.

./configure --prefix=/usr/bin --enable-ac97 --enable-alsa --disable-vnc-tls --disable-gcc-check --target-list=x86_64-softmmu

gcc -I. -I.. -I/home/rick/docs/qemu/trunk/target-i386 -I/home/rick/docs/qemu/trunk -MMD -MP -DNEED_CPU_H -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/home/rick/docs/qemu/trunk/tcg -I/home/rick/docs/qemu/trunk/tcg/x86_64 -I/home/rick/docs/qemu/trunk/fpu -DHAS_AUDIO -DHAS_AUDIO_CHOICE -I/home/rick/docs/qemu/trunk/slirp -Wall -O2 -g -fno-strict-aliasing  -m64 -c -o 
helper2.o /home/rick/docs/qemu/trunk/target-i386/helper2.c
gcc -I. -I.. -I/home/rick/docs/qemu/trunk/target-i386 -I/home/rick/docs/qemu/trunk -MMD -MP -DNEED_CPU_H -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/home/rick/docs/qemu/trunk/tcg -I/home/rick/docs/qemu/trunk/tcg/x86_64 -I/home/rick/docs/qemu/trunk/fpu -DHAS_AUDIO -DHAS_AUDIO_CHOICE -I/home/rick/docs/qemu/trunk/slirp -Wall -O2 -g -fno-strict-aliasing  -m64 -c -o 
disas.o /home/rick/docs/qemu/trunk/disas.c
rm -f libqemu.a
ar rcs libqemu.a exec.o kqemu.o translate-all.o cpu-exec.o translate.o 
host-utils.o op.o tcg/tcg.o tcg/tcg-dyngen.o tcg/tcg-runtime.o 
fpu/softfloat-native.o helper.o helper2.o disas.o i386-dis.o
gcc -g  -m64 -o qemu-system-x86_64 vl.o osdep.o monitor.o pci.o loader.o 
isa_mmio.o machine.o block-raw-posix.o lsi53c895a.o esp.o usb-ohci.o 
eeprom93xx.o eepro100.o ne2000.o pcnet.o rtl8139.o e1000.o ide.o pckbd.o 
ps2.o vga.o sb16.o es1370.o ac97.o dma.o fdc.o mc146818rtc.o serial.o i8259.o 
i8254.o pcspk.o pc.o cirrus_vga.o apic.o parallel.o acpi.o piix_pci.o 
usb-uhci.o vmmouse.o vmport.o vmware_vga.o gdbstub.o ../libqemu_common.a 
libqemu.a  -lm -lz -lasound -lrt -lpthread -lutil -lSDL -lpthread  -lcurses
libqemu.a(translate.o): In function `optimize_flags_init':
/home/rick/docs/qemu/trunk/target-i386/translate.c:6694: undefined reference 
to `tcg_global_reg2_new_hack'
collect2: ld returned 1 exit status


On Monday 12 May 2008 08:49:16 am Fabrice Bellard wrote:
> Revision: 4438
>           http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=4438
> Author:   bellard
> Date:     2008-05-12 13:49:14 +0000 (Mon, 12 May 2008)
>
> Log Message:
> -----------
> temporary hack to handle register shortage with dyngen for qemu_st64()
>
> Modified Paths:
> --------------
>     trunk/tcg/tcg.c
>     trunk/tcg/tcg.h
>
> Modified: trunk/tcg/tcg.c
> ===================================================================
> --- trunk/tcg/tcg.c	2008-05-12 12:23:31 UTC (rev 4437)
> +++ trunk/tcg/tcg.c	2008-05-12 13:49:14 UTC (rev 4438)
> @@ -308,6 +308,45 @@
>      return MAKE_TCGV(idx);
>  }
>
> +#if TCG_TARGET_REG_BITS == 32
> +/* temporary hack to avoid register shortage for tcg_qemu_st64() */
> +TCGv tcg_global_reg2_new_hack(TCGType type, int reg1, int reg2,
> +                              const char *name)
> +{
> +    TCGContext *s = &tcg_ctx;
> +    TCGTemp *ts;
> +    int idx;
> +    char buf[64];
> +
> +    if (type != TCG_TYPE_I64)
> +        tcg_abort();
> +    idx = s->nb_globals;
> +    tcg_temp_alloc(s, s->nb_globals + 2);
> +    ts = &s->temps[s->nb_globals];
> +    ts->base_type = type;
> +    ts->type = TCG_TYPE_I32;
> +    ts->fixed_reg = 1;
> +    ts->reg = reg1;
> +    ts->val_type = TEMP_VAL_REG;
> +    pstrcpy(buf, sizeof(buf), name);
> +    pstrcat(buf, sizeof(buf), "_0");
> +    ts->name = strdup(buf);
> +
> +    ts++;
> +    ts->base_type = type;
> +    ts->type = TCG_TYPE_I32;
> +    ts->fixed_reg = 1;
> +    ts->reg = reg2;
> +    ts->val_type = TEMP_VAL_REG;
> +    pstrcpy(buf, sizeof(buf), name);
> +    pstrcat(buf, sizeof(buf), "_1");
> +    ts->name = strdup(buf);
> +
> +    s->nb_globals += 2;
> +    return MAKE_TCGV(idx);
> +}
> +#endif
> +
>  TCGv tcg_global_mem_new(TCGType type, int reg, tcg_target_long offset,
>                          const char *name)
>  {
>
> Modified: trunk/tcg/tcg.h
> ===================================================================
> --- trunk/tcg/tcg.h	2008-05-12 12:23:31 UTC (rev 4437)
> +++ trunk/tcg/tcg.h	2008-05-12 13:49:14 UTC (rev 4438)
> @@ -267,6 +267,8 @@
>                     tcg_target_long start, tcg_target_long size);
>  void tcg_set_macro_func(TCGContext *s, TCGMacroFunc *func);
>  TCGv tcg_global_reg_new(TCGType type, int reg, const char *name);
> +TCGv tcg_global_reg2_new_hack(TCGType type, int reg1, int reg2,
> +                              const char *name);
>  TCGv tcg_global_mem_new(TCGType type, int reg, tcg_target_long offset,
>                          const char *name);
>  TCGv tcg_temp_new(TCGType type);

  reply	other threads:[~2008-05-12 15:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-12 13:49 [Qemu-devel] [4438] temporary hack to handle register shortage with dyngen for qemu_st64 () Fabrice Bellard
2008-05-12 15:53 ` Rick Vernam [this message]
2008-05-12 22:04   ` Rick Vernam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200805121053.37322.rickv@hobi.com \
    --to=rickv@hobi.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.