From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Fri, 16 May 2008 13:27:12 +0000 Subject: Re: [lm-sensors] Bad value with w83627thf Message-Id: <20080516152712.629606bf@hyperion.delvare> List-Id: References: <6101e8c40805160559i4eb94ba7y7cbfea9c3f528821@mail.gmail.com> In-Reply-To: <6101e8c40805160559i4eb94ba7y7cbfea9c3f528821@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Oliver Pinter Cc: LM Sensors , linux-kernel@vger.kernel.org Hi Oliver, You are writing to the wrong mailing list (i2c instead of lm-sensors) so I am redirecting. On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: > linux-2.6 - git HEAD on: 9662369 > lm-sensors: 1:3.0.1-5 > libsensors4: 1:3.0.1-5 > os: debian lenny > sernsor: w83627thf on asus p4c800 MB > > with 2.6.26-rcX kernel, reported false Battery values, > --------------------------------------> > VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM > <------------------------------------- There is nothing wrong here. +3.26V sounds possible and correct for the battery voltage. If you are worried about the min and max values: it is up to you to edit your sensors3.conf file to set them properly if the BIOS of your motherboard did not (apply the changes with "sensors -s"). The alarm will go away when you do. > lspci -xxx > 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus > Controller (rev 02) > 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 Completely irrelevant here, the Winbond W83627THF is an LPC chip, it doesn't have an I2C/SMBus interface, so the SMBus controller doesn't matter at all. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757128AbYEPN1a (ORCPT ); Fri, 16 May 2008 09:27:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755166AbYEPN1W (ORCPT ); Fri, 16 May 2008 09:27:22 -0400 Received: from zone0.gcu-squad.org ([212.85.147.21]:1907 "EHLO services.gcu-squad.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754419AbYEPN1V (ORCPT ); Fri, 16 May 2008 09:27:21 -0400 Date: Fri, 16 May 2008 15:27:12 +0200 From: Jean Delvare To: "Oliver Pinter" Cc: LM Sensors , linux-kernel@vger.kernel.org Subject: Re: Bad value with w83627thf Message-ID: <20080516152712.629606bf@hyperion.delvare> In-Reply-To: <6101e8c40805160559i4eb94ba7y7cbfea9c3f528821@mail.gmail.com> References: <6101e8c40805160559i4eb94ba7y7cbfea9c3f528821@mail.gmail.com> X-Mailer: Claws Mail 3.4.0 (GTK+ 2.10.6; x86_64-suse-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Oliver, You are writing to the wrong mailing list (i2c instead of lm-sensors) so I am redirecting. On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote: > linux-2.6 - git HEAD on: 9662369 > lm-sensors: 1:3.0.1-5 > libsensors4: 1:3.0.1-5 > os: debian lenny > sernsor: w83627thf on asus p4c800 MB > > with 2.6.26-rcX kernel, reported false Battery values, > --------------------------------------> > VBat: +3.26 V (min = +0.02 V, max = +3.01 V) ALARM > <------------------------------------- There is nothing wrong here. +3.26V sounds possible and correct for the battery voltage. If you are worried about the min and max values: it is up to you to edit your sensors3.conf file to set them properly if the BIOS of your motherboard did not (apply the changes with "sensors -s"). The alarm will go away when you do. > lspci -xxx > 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus > Controller (rev 02) > 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 Completely irrelevant here, the Winbond W83627THF is an LPC chip, it doesn't have an I2C/SMBus interface, so the SMBus controller doesn't matter at all. -- Jean Delvare