From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Borislav Petkov <petkovbb@gmail.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 17/40] ide-tape: merge callbacks
Date: Sun, 18 May 2008 20:57:01 +0200 [thread overview]
Message-ID: <20080518185701.5636.26650.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080518185428.5636.77234.sendpatchset@localhost.localdomain>
The appropriate functionality of the callback is established through querying
the ATAPI packet command in pc->c[0].
While at it:
- add uptodate variable + leave just one idetape_end_request() call
- don't use HWGROUP() macro
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-tape.c | 168 ++++++++++++++++++-------------------------------
1 file changed, 64 insertions(+), 104 deletions(-)
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -503,18 +503,6 @@ static struct request *idetape_next_rq_s
return (&tape->rq_stack[tape->rq_stack_index++]);
}
-static void idetape_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc->c, 0, 12);
- pc->retries = 0;
- pc->flags = 0;
- pc->req_xfer = 0;
- pc->buf = pc->pc_buf;
- pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
- pc->bh = NULL;
- pc->b_data = NULL;
-}
-
/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
@@ -631,30 +619,85 @@ static int idetape_end_request(ide_drive
return 0;
}
-static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive)
+static ide_startstop_t ide_tape_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
+ struct ide_atapi_pc *pc = tape->pc;
+ int uptodate = pc->error ? 0 : 1;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
- if (!tape->pc->error) {
- idetape_analyze_error(drive, tape->pc->buf);
- idetape_end_request(drive, 1, 0);
- } else {
- printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - "
- "Aborting request!\n");
- idetape_end_request(drive, 0, 0);
+ if (pc->c[0] == REQUEST_SENSE) {
+ if (uptodate)
+ idetape_analyze_error(drive, pc->buf);
+ else
+ printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
+ "itself - Aborting request!\n");
+ } else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
+ struct request *rq = drive->hwif->hwgroup->rq;
+ int blocks = pc->xferred / tape->blk_size;
+
+ tape->avg_size += blocks * tape->blk_size;
+
+ if (time_after_eq(jiffies, tape->avg_time + HZ)) {
+ tape->avg_speed = tape->avg_size * HZ /
+ (jiffies - tape->avg_time) / 1024;
+ tape->avg_size = 0;
+ tape->avg_time = jiffies;
+ }
+
+ tape->first_frame += blocks;
+ rq->current_nr_sectors -= blocks;
+
+ if (pc->error)
+ uptodate = pc->error;
+ } else if (pc->c[0] == READ_POSITION && uptodate) {
+ u8 *readpos = tape->pc->buf;
+
+ debug_log(DBG_SENSE, "BOP - %s\n",
+ (readpos[0] & 0x80) ? "Yes" : "No");
+ debug_log(DBG_SENSE, "EOP - %s\n",
+ (readpos[0] & 0x40) ? "Yes" : "No");
+
+ if (readpos[0] & 0x4) {
+ printk(KERN_INFO "ide-tape: Block location is unknown"
+ "to the tape\n");
+ clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ uptodate = 0;
+ } else {
+ debug_log(DBG_SENSE, "Block Location - %u\n",
+ be32_to_cpu(*(u32 *)&readpos[4]));
+
+ tape->partition = readpos[1];
+ tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
+ set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+ }
}
+
+ idetape_end_request(drive, uptodate, 0);
+
return ide_stopped;
}
+static void idetape_init_pc(struct ide_atapi_pc *pc)
+{
+ memset(pc->c, 0, 12);
+ pc->retries = 0;
+ pc->flags = 0;
+ pc->req_xfer = 0;
+ pc->buf = pc->pc_buf;
+ pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
+ pc->bh = NULL;
+ pc->b_data = NULL;
+ pc->idetape_callback = ide_tape_callback;
+}
+
static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
pc->req_xfer = 20;
- pc->idetape_callback = &idetape_request_sense_callback;
}
static void idetape_init_rq(struct request *rq, u8 cmd)
@@ -1025,16 +1068,6 @@ static ide_startstop_t idetape_issue_pc(
}
}
-static ide_startstop_t idetape_pc_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- idetape_end_request(drive, tape->pc->error ? 0 : 1, 0);
- return ide_stopped;
-}
-
/* A mode sense command is used to "sense" tape parameters. */
static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
@@ -1060,7 +1093,6 @@ static void idetape_create_mode_sense_cm
pc->req_xfer = 24;
else
pc->req_xfer = 50;
- pc->idetape_callback = &idetape_pc_callback;
}
static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
@@ -1091,32 +1123,6 @@ static ide_startstop_t idetape_media_acc
return pc->idetape_callback(drive);
}
-static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- struct request *rq = HWGROUP(drive)->rq;
- int blocks = tape->pc->xferred / tape->blk_size;
-
- tape->avg_size += blocks * tape->blk_size;
-
- if (time_after_eq(jiffies, tape->avg_time + HZ)) {
- tape->avg_speed = tape->avg_size * HZ /
- (jiffies - tape->avg_time) / 1024;
- tape->avg_size = 0;
- tape->avg_time = jiffies;
- }
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- tape->first_frame += blocks;
- rq->current_nr_sectors -= blocks;
-
- if (!tape->pc->error)
- idetape_end_request(drive, 1, 0);
- else
- idetape_end_request(drive, tape->pc->error, 0);
- return ide_stopped;
-}
-
static void idetape_create_read_cmd(idetape_tape_t *tape,
struct ide_atapi_pc *pc,
unsigned int length, struct idetape_bh *bh)
@@ -1125,7 +1131,6 @@ static void idetape_create_read_cmd(idet
pc->c[0] = READ_6;
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->idetape_callback = &idetape_rw_callback;
pc->bh = bh;
atomic_set(&bh->b_count, 0);
pc->buf = NULL;
@@ -1143,7 +1148,6 @@ static void idetape_create_write_cmd(ide
pc->c[0] = WRITE_6;
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->idetape_callback = &idetape_rw_callback;
pc->flags |= PC_FLAG_WRITING;
pc->bh = bh;
pc->b_data = bh->b_data;
@@ -1412,40 +1416,6 @@ static void idetape_init_merge_buffer(id
}
}
-static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- u8 *readpos = tape->pc->buf;
-
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- if (!tape->pc->error) {
- debug_log(DBG_SENSE, "BOP - %s\n",
- (readpos[0] & 0x80) ? "Yes" : "No");
- debug_log(DBG_SENSE, "EOP - %s\n",
- (readpos[0] & 0x40) ? "Yes" : "No");
-
- if (readpos[0] & 0x4) {
- printk(KERN_INFO "ide-tape: Block location is unknown"
- "to the tape\n");
- clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
- idetape_end_request(drive, 0, 0);
- } else {
- debug_log(DBG_SENSE, "Block Location - %u\n",
- be32_to_cpu(*(u32 *)&readpos[4]));
-
- tape->partition = readpos[1];
- tape->first_frame =
- be32_to_cpu(*(u32 *)&readpos[4]);
- set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
- idetape_end_request(drive, 1, 0);
- }
- } else {
- idetape_end_request(drive, 0, 0);
- }
- return ide_stopped;
-}
-
/*
* Write a filemark if write_filemark=1. Flush the device buffers without
* writing a filemark otherwise.
@@ -1457,14 +1427,12 @@ static void idetape_create_write_filemar
pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = TEST_UNIT_READY;
- pc->idetape_callback = &idetape_pc_callback;
}
/*
@@ -1502,7 +1470,6 @@ static void idetape_create_load_unload_c
pc->c[0] = START_STOP;
pc->c[4] = cmd;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
@@ -1554,7 +1521,6 @@ static void idetape_create_read_position
idetape_init_pc(pc);
pc->c[0] = READ_POSITION;
pc->req_xfer = 20;
- pc->idetape_callback = &idetape_read_position_callback;
}
static int idetape_read_position(ide_drive_t *drive)
@@ -1582,7 +1548,6 @@ static void idetape_create_locate_cmd(id
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
pc->c[8] = partition;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static int idetape_create_prevent_cmd(ide_drive_t *drive,
@@ -1597,7 +1562,6 @@ static int idetape_create_prevent_cmd(id
idetape_init_pc(pc);
pc->c[0] = ALLOW_MEDIUM_REMOVAL;
pc->c[4] = prevent;
- pc->idetape_callback = &idetape_pc_callback;
return 1;
}
@@ -1704,7 +1668,6 @@ static void idetape_create_inquiry_cmd(s
pc->c[0] = INQUIRY;
pc->c[4] = 254;
pc->req_xfer = 254;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_rewind_cmd(ide_drive_t *drive,
@@ -1713,7 +1676,6 @@ static void idetape_create_rewind_cmd(id
idetape_init_pc(pc);
pc->c[0] = REZERO_UNIT;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
@@ -1722,7 +1684,6 @@ static void idetape_create_erase_cmd(str
pc->c[0] = ERASE;
pc->c[1] = 1;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
@@ -1732,7 +1693,6 @@ static void idetape_create_space_cmd(str
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
- pc->idetape_callback = &idetape_pc_callback;
}
/* Queue up a character device originated write request. */
next prev parent reply other threads:[~2008-05-18 18:39 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-18 18:54 [PATCH 00/40] ide: generic ATAPI support Bartlomiej Zolnierkiewicz
2008-05-18 18:54 ` [PATCH 01/40] ide-scsi: fix race in idescsi_transfer_pc() Bartlomiej Zolnierkiewicz
2008-05-18 18:54 ` [PATCH 02/40] ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr() Bartlomiej Zolnierkiewicz
2008-05-18 18:54 ` [PATCH 03/40] ide-scsi: fix handling of DMA errors " Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 04/40] ide-scsi: fix Interrupt Reason checking " Bartlomiej Zolnierkiewicz
2008-05-19 5:10 ` Borislav Petkov
2008-05-27 18:30 ` Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 05/40] ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers() Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 06/40] ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc() Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 07/40] ide-scsi: add debug_log() macro Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 08/40] ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq() Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 09/40] ide-tape: remove superfluous error message from idetape_pc_intr() Bartlomiej Zolnierkiewicz
2008-05-18 18:55 ` [PATCH 10/40] ide-tape: remove superfluous warning message from idetape_issue_pc() Bartlomiej Zolnierkiewicz
2008-05-18 18:56 ` [PATCH 11/40] ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef Bartlomiej Zolnierkiewicz
2008-05-18 18:56 ` [PATCH 12/40] ide-tape: remove stale comments from idetape_pc_intr() Bartlomiej Zolnierkiewicz
2008-05-18 18:56 ` [PATCH 13/40] ide-tape: remove SIMULATE_ERRORS debug code Bartlomiej Zolnierkiewicz
2008-05-18 18:56 ` [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1() Bartlomiej Zolnierkiewicz
2008-05-21 5:24 ` Borislav Petkov
2008-05-27 18:57 ` Bartlomiej Zolnierkiewicz
2008-05-27 5:37 ` Borislav Petkov
2008-05-29 23:01 ` Bartlomiej Zolnierkiewicz
2008-05-18 18:56 ` [PATCH 15/40] ide-{floppy,tape,scsi}: log device name instead of driver name Bartlomiej Zolnierkiewicz
2008-05-18 18:56 ` [PATCH 16/40] ide-tape: make idetape_retry_pc() void Bartlomiej Zolnierkiewicz
2008-05-18 18:57 ` Bartlomiej Zolnierkiewicz [this message]
2008-05-18 18:57 ` [PATCH 18/40] ide-tape: make pc->idetape_callback void Bartlomiej Zolnierkiewicz
2008-05-18 18:57 ` [PATCH 19/40] ide-floppy: merge callbacks Bartlomiej Zolnierkiewicz
2008-05-18 18:57 ` [PATCH 20/40] ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback Bartlomiej Zolnierkiewicz
2008-05-18 18:57 ` [PATCH 21/40] ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK Bartlomiej Zolnierkiewicz
2008-05-18 18:57 ` [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1() Bartlomiej Zolnierkiewicz
2008-05-20 11:00 ` Sergei Shtylyov
2008-05-27 18:58 ` Bartlomiej Zolnierkiewicz
2008-05-18 18:57 ` [PATCH 23/40] ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 24/40] ide-tape: factor out waiting for good ireason from idetape_transfer_pc() Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 25/40] ide: add PC_FLAG_ZIP_DRIVE pc flag Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 26/40] ide-{cd,floppy,tape}: remove checking for drive->scsi Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 27/40] ide-scsi: set drive->scsi flag for devices handled by the driver Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 28/40] ide: add ide_transfer_pc() helper Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 29/40] ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc() Bartlomiej Zolnierkiewicz
2008-05-18 18:58 ` [PATCH 30/40] ide: add PC_FLAG_DRQ_INTERRUPT pc flag Bartlomiej Zolnierkiewicz
2008-05-18 18:59 ` [PATCH 31/40] ide: add ide_issue_pc() helper Bartlomiej Zolnierkiewicz
2008-05-18 18:59 ` [PATCH 32/40] ide-{floppy,tape}: move checking of ->failed_pc to ->callback Bartlomiej Zolnierkiewicz
2008-05-18 18:59 ` [PATCH 33/40] ide-tape: factor out DSC handling from idetape_pc_intr() Bartlomiej Zolnierkiewicz
2008-05-18 18:59 ` [PATCH 34/40] ide-tape: add ide_tape_io_buffers() helper Bartlomiej Zolnierkiewicz
2008-05-18 18:59 ` [PATCH 35/40] ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled Bartlomiej Zolnierkiewicz
2008-05-18 18:59 ` [PATCH 36/40] ide-floppy: add more debugging to idefloppy_pc_intr() Bartlomiej Zolnierkiewicz
2008-05-18 19:00 ` [PATCH 37/40] ide-scsi: use pc->callback Bartlomiej Zolnierkiewicz
2008-05-18 19:00 ` [PATCH 38/40] ide-scsi: add more debugging to idescsi_pc_intr() Bartlomiej Zolnierkiewicz
2008-05-18 19:00 ` [PATCH 39/40] ide-{floppy,scsi}: read Status Register before stopping DMA engine Bartlomiej Zolnierkiewicz
2008-05-18 19:00 ` [PATCH 40/40] ide: add ide_pc_intr() helper Bartlomiej Zolnierkiewicz
2008-05-22 7:43 ` [PATCH 00/40] ide: generic ATAPI support Borislav Petkov
2008-05-25 13:23 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080518185701.5636.26650.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.