All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: linux-kernel@vger.kernel.org, akpm@osdl.org, greg@kroah.com
Subject: [PATCH 09/20] synclink: use tty_port
Date: Mon, 19 May 2008 15:50:57 +0100	[thread overview]
Message-ID: <20080519145056.19326.59447.stgit@core> (raw)
In-Reply-To: <20080519144557.19326.74313.stgit@core>

From: Alan Cox <alan@redhat.com>

Switch the synclink ports to use the new tty_port structure
---

 drivers/char/synclink.c    |  195 ++++++++++++++++++++----------------------
 drivers/char/synclink_gt.c |  201 +++++++++++++++++++++-----------------------
 drivers/char/synclinkmp.c  |  203 +++++++++++++++++++++-----------------------
 3 files changed, 289 insertions(+), 310 deletions(-)


diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index ac5080d..0678f61 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -180,8 +180,7 @@ struct tx_holding_buffer {
  
 struct mgsl_struct {
 	int			magic;
-	int			flags;
-	int			count;		/* count of opens */
+	struct tty_port		port;
 	int			line;
 	int                     hw_version;
 	unsigned short		close_delay;
@@ -189,10 +188,8 @@ struct mgsl_struct {
 	
 	struct mgsl_icount	icount;
 	
-	struct tty_struct 	*tty;
 	int			timeout;
 	int			x_char;		/* xon/xoff character */
-	int			blocked_open;	/* # of blocked opens */
 	u16			read_status_mask;
 	u16			ignore_status_mask;	
 	unsigned char 		*xmit_buf;
@@ -200,9 +197,6 @@ struct mgsl_struct {
 	int			xmit_tail;
 	int			xmit_cnt;
 	
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-	
 	wait_queue_head_t	status_event_wait_q;
 	wait_queue_head_t	event_wait_q;
 	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
@@ -1134,7 +1128,7 @@ static void mgsl_bh_receive(struct mgsl_struct *info)
 
 static void mgsl_bh_transmit(struct mgsl_struct *info)
 {
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 	unsigned long flags;
 	
 	if ( debug_level >= DEBUG_LEVEL_BH )
@@ -1276,7 +1270,7 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
 	else 
 #endif
 	{
-		if (info->tty->stopped || info->tty->hw_stopped) {
+		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
 			usc_stop_transmitter(info);
 			return;
 		}
@@ -1357,29 +1351,29 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
 		wake_up_interruptible(&info->status_event_wait_q);
 		wake_up_interruptible(&info->event_wait_q);
 
-		if ( (info->flags & ASYNC_CHECK_CD) && 
+		if ( (info->port.flags & ASYNC_CHECK_CD) && 
 		     (status & MISCSTATUS_DCD_LATCHED) ) {
 			if ( debug_level >= DEBUG_LEVEL_ISR )
 				printk("%s CD now %s...", info->device_name,
 				       (status & MISCSTATUS_DCD) ? "on" : "off");
 			if (status & MISCSTATUS_DCD)
-				wake_up_interruptible(&info->open_wait);
+				wake_up_interruptible(&info->port.open_wait);
 			else {
 				if ( debug_level >= DEBUG_LEVEL_ISR )
 					printk("doing serial hangup...");
-				if (info->tty)
-					tty_hangup(info->tty);
+				if (info->port.tty)
+					tty_hangup(info->port.tty);
 			}
 		}
 	
-		if ( (info->flags & ASYNC_CTS_FLOW) && 
+		if ( (info->port.flags & ASYNC_CTS_FLOW) && 
 		     (status & MISCSTATUS_CTS_LATCHED) ) {
-			if (info->tty->hw_stopped) {
+			if (info->port.tty->hw_stopped) {
 				if (status & MISCSTATUS_CTS) {
 					if ( debug_level >= DEBUG_LEVEL_ISR )
 						printk("CTS tx start...");
-					if (info->tty)
-						info->tty->hw_stopped = 0;
+					if (info->port.tty)
+						info->port.tty->hw_stopped = 0;
 					usc_start_transmitter(info);
 					info->pending_bh |= BH_TRANSMIT;
 					return;
@@ -1388,8 +1382,8 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
 				if (!(status & MISCSTATUS_CTS)) {
 					if ( debug_level >= DEBUG_LEVEL_ISR )
 						printk("CTS tx stop...");
-					if (info->tty)
-						info->tty->hw_stopped = 1;
+					if (info->port.tty)
+						info->port.tty->hw_stopped = 1;
 					usc_stop_transmitter(info);
 				}
 			}
@@ -1423,7 +1417,7 @@ static void mgsl_isr_transmit_data( struct mgsl_struct *info )
 			
 	usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
 	
-	if (info->tty->stopped || info->tty->hw_stopped) {
+	if (info->port.tty->stopped || info->port.tty->hw_stopped) {
 		usc_stop_transmitter(info);
 		return;
 	}
@@ -1453,7 +1447,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
 	u16 status;
 	int work = 0;
 	unsigned char DataByte;
- 	struct tty_struct *tty = info->tty;
+ 	struct tty_struct *tty = info->port.tty;
  	struct	mgsl_icount *icount = &info->icount;
 	
 	if ( debug_level >= DEBUG_LEVEL_ISR )	
@@ -1514,7 +1508,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
 		
 			if (status & RXSTATUS_BREAK_RECEIVED) {
 				flag = TTY_BREAK;
-				if (info->flags & ASYNC_SAK)
+				if (info->port.flags & ASYNC_SAK)
 					do_SAK(tty);
 			} else if (status & RXSTATUS_PARITY_ERROR)
 				flag = TTY_PARITY;
@@ -1771,7 +1765,7 @@ static int startup(struct mgsl_struct * info)
 	if ( debug_level >= DEBUG_LEVEL_INFO )
 		printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
 		
-	if (info->flags & ASYNC_INITIALIZED)
+	if (info->port.flags & ASYNC_INITIALIZED)
 		return 0;
 	
 	if (!info->xmit_buf) {
@@ -1798,8 +1792,8 @@ static int startup(struct mgsl_struct * info)
 		retval = mgsl_adapter_test(info);
 		
 	if ( retval ) {
-  		if (capable(CAP_SYS_ADMIN) && info->tty)
-			set_bit(TTY_IO_ERROR, &info->tty->flags);
+  		if (capable(CAP_SYS_ADMIN) && info->port.tty)
+			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 		mgsl_release_resources(info);
   		return retval;
   	}
@@ -1807,10 +1801,10 @@ static int startup(struct mgsl_struct * info)
 	/* program hardware for current parameters */
 	mgsl_change_params(info);
 	
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags |= ASYNC_INITIALIZED;
+	info->port.flags |= ASYNC_INITIALIZED;
 	
 	return 0;
 	
@@ -1827,7 +1821,7 @@ static void shutdown(struct mgsl_struct * info)
 {
 	unsigned long flags;
 	
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
@@ -1864,7 +1858,7 @@ static void shutdown(struct mgsl_struct * info)
 	/* on the ISA adapter. This has no effect for the PCI adapter */
 	usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
 	
- 	if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
  		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
 		usc_set_serial_signals(info);
 	}
@@ -1873,10 +1867,10 @@ static void shutdown(struct mgsl_struct * info)
 
 	mgsl_release_resources(info);	
 	
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags &= ~ASYNC_INITIALIZED;
+	info->port.flags &= ~ASYNC_INITIALIZED;
 	
 }	/* end of shutdown() */
 
@@ -1908,7 +1902,7 @@ static void mgsl_program_hw(struct mgsl_struct *info)
 	usc_EnableInterrupts(info, IO_PIN);
 	usc_get_serial_signals(info);
 		
-	if (info->netcount || info->tty->termios->c_cflag & CREAD)
+	if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
 		usc_start_receiver(info);
 		
 	spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -1921,14 +1915,14 @@ static void mgsl_change_params(struct mgsl_struct *info)
 	unsigned cflag;
 	int bits_per_char;
 
-	if (!info->tty || !info->tty->termios)
+	if (!info->port.tty || !info->port.tty->termios)
 		return;
 		
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgsl_change_params(%s)\n",
 			 __FILE__,__LINE__, info->device_name );
 			 
-	cflag = info->tty->termios->c_cflag;
+	cflag = info->port.tty->termios->c_cflag;
 
 	/* if B0 rate (hangup) specified then negate DTR and RTS */
 	/* otherwise assert DTR and RTS */
@@ -1976,7 +1970,7 @@ static void mgsl_change_params(struct mgsl_struct *info)
 	 * current data rate.
 	 */
 	if (info->params.data_rate <= 460800)
-		info->params.data_rate = tty_get_baud_rate(info->tty);
+		info->params.data_rate = tty_get_baud_rate(info->port.tty);
 	
 	if ( info->params.data_rate ) {
 		info->timeout = (32*HZ*bits_per_char) / 
@@ -1985,31 +1979,31 @@ static void mgsl_change_params(struct mgsl_struct *info)
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
 	if (cflag & CRTSCTS)
-		info->flags |= ASYNC_CTS_FLOW;
+		info->port.flags |= ASYNC_CTS_FLOW;
 	else
-		info->flags &= ~ASYNC_CTS_FLOW;
+		info->port.flags &= ~ASYNC_CTS_FLOW;
 		
 	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
+		info->port.flags &= ~ASYNC_CHECK_CD;
 	else
-		info->flags |= ASYNC_CHECK_CD;
+		info->port.flags |= ASYNC_CHECK_CD;
 
 	/* process tty input control flags */
 	
 	info->read_status_mask = RXSTATUS_OVERRUN;
-	if (I_INPCK(info->tty))
+	if (I_INPCK(info->port.tty))
 		info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- 	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
  		info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
 	
-	if (I_IGNPAR(info->tty))
+	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
-	if (I_IGNBRK(info->tty)) {
+	if (I_IGNBRK(info->port.tty)) {
 		info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
 		/* If ignoring parity and break indicators, ignore 
 		 * overruns too.  (For real raw support).
 		 */
-		if (I_IGNPAR(info->tty))
+		if (I_IGNPAR(info->port.tty))
 			info->ignore_status_mask |= RXSTATUS_OVERRUN;
 	}
 
@@ -3113,32 +3107,32 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
 	
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
-			 __FILE__,__LINE__, info->device_name, info->count);
+			 __FILE__,__LINE__, info->device_name, info->port.count);
 			 
-	if (!info->count)
+	if (!info->port.count)
 		return;
 
 	if (tty_hung_up_p(filp))
 		goto cleanup;
 			
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (info->port.count != 1)) {
 		/*
 		 * tty->count is 1 and the tty structure will be freed.
-		 * info->count should be one in this case.
+		 * info->port.count should be one in this case.
 		 * if it's not, correct it so that the port is shutdown.
 		 */
 		printk("mgsl_close: bad refcount; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
+		       "info->port.count is %d\n", info->port.count);
+		info->port.count = 1;
 	}
 	
-	info->count--;
+	info->port.count--;
 	
 	/* if at least one open remaining, leave hardware active */
-	if (info->count)
+	if (info->port.count)
 		goto cleanup;
 	
-	info->flags |= ASYNC_CLOSING;
+	info->port.flags |= ASYNC_CLOSING;
 	
 	/* set tty->closing to notify line discipline to 
 	 * only process XON/XOFF characters. Only the N_TTY
@@ -3155,7 +3149,7 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
 		tty_wait_until_sent(tty, info->closing_wait);
 	}
 		
- 	if (info->flags & ASYNC_INITIALIZED)
+ 	if (info->port.flags & ASYNC_INITIALIZED)
  		mgsl_wait_until_sent(tty, info->timeout);
 
 	mgsl_flush_buffer(tty);
@@ -3165,23 +3159,23 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
 	shutdown(info);
 	
 	tty->closing = 0;
-	info->tty = NULL;
+	info->port.tty = NULL;
 	
-	if (info->blocked_open) {
+	if (info->port.blocked_open) {
 		if (info->close_delay) {
 			msleep_interruptible(jiffies_to_msecs(info->close_delay));
 		}
-		wake_up_interruptible(&info->open_wait);
+		wake_up_interruptible(&info->port.open_wait);
 	}
 	
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 			 
-	wake_up_interruptible(&info->close_wait);
+	wake_up_interruptible(&info->port.close_wait);
 	
 cleanup:			
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
-			tty->driver->name, info->count);
+			tty->driver->name, info->port.count);
 			
 }	/* end of mgsl_close() */
 
@@ -3211,7 +3205,7 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
 	if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
 		return;
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		goto exit;
 	 
 	orig_jiffies = jiffies;
@@ -3283,11 +3277,11 @@ static void mgsl_hangup(struct tty_struct *tty)
 	mgsl_flush_buffer(tty);
 	shutdown(info);
 	
-	info->count = 0;	
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = NULL;
+	info->port.count = 0;	
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
 
-	wake_up_interruptible(&info->open_wait);
+	wake_up_interruptible(&info->port.open_wait);
 	
 }	/* end of mgsl_hangup() */
 
@@ -3319,7 +3313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 
 	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
 		/* nonblock mode is set or port is not enabled */
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
@@ -3328,25 +3322,25 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 
 	/* Wait for carrier detect and the line to become
 	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
+	 * this loop, info->port.count is dropped by one, so that
 	 * mgsl_close() knows when to free things.  We restore it upon
 	 * exit, either normal or abnormal.
 	 */
 	 
 	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
+	add_wait_queue(&info->port.open_wait, &wait);
 	
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):block_til_ready before block on %s count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, info->count );
+			 __FILE__,__LINE__, tty->driver->name, info->port.count );
 
 	spin_lock_irqsave(&info->irq_spinlock, flags);
 	if (!tty_hung_up_p(filp)) {
 		extra_count = true;
-		info->count--;
+		info->port.count--;
 	}
 	spin_unlock_irqrestore(&info->irq_spinlock, flags);
-	info->blocked_open++;
+	info->port.blocked_open++;
 	
 	while (1) {
 		if (tty->termios->c_cflag & CBAUD) {
@@ -3358,8 +3352,8 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 		
 		set_current_state(TASK_INTERRUPTIBLE);
 		
-		if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
-			retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+		if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+			retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
 					-EAGAIN : -ERESTARTSYS;
 			break;
 		}
@@ -3368,7 +3362,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	 	usc_get_serial_signals(info);
 		spin_unlock_irqrestore(&info->irq_spinlock,flags);
 		
- 		if (!(info->flags & ASYNC_CLOSING) &&
+ 		if (!(info->port.flags & ASYNC_CLOSING) &&
  		    (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
  			break;
 		}
@@ -3380,24 +3374,24 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 		
 		if (debug_level >= DEBUG_LEVEL_INFO)
 			printk("%s(%d):block_til_ready blocking on %s count=%d\n",
-				 __FILE__,__LINE__, tty->driver->name, info->count );
+				 __FILE__,__LINE__, tty->driver->name, info->port.count );
 				 
 		schedule();
 	}
 	
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
+	remove_wait_queue(&info->port.open_wait, &wait);
 	
 	if (extra_count)
-		info->count++;
-	info->blocked_open--;
+		info->port.count++;
+	info->port.blocked_open--;
 	
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, info->count );
+			 __FILE__,__LINE__, tty->driver->name, info->port.count );
 			 
 	if (!retval)
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 		
 	return retval;
 	
@@ -3435,22 +3429,22 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
 		return -ENODEV;
 	
 	tty->driver_data = info;
-	info->tty = tty;
+	info->port.tty = tty;
 		
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
-			 __FILE__,__LINE__,tty->driver->name, info->count);
+			 __FILE__,__LINE__,tty->driver->name, info->port.count);
 
 	/* If port is closing, signal caller to try again */
-	if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-		retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
 	}
 	
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
@@ -3458,10 +3452,10 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
 		spin_unlock_irqrestore(&info->netlock, flags);
 		goto cleanup;
 	}
-	info->count++;
+	info->port.count++;
 	spin_unlock_irqrestore(&info->netlock, flags);
 
-	if (info->count == 1) {
+	if (info->port.count == 1) {
 		/* 1st open on this device, init hardware */
 		retval = startup(info);
 		if (retval < 0)
@@ -3484,9 +3478,9 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
 cleanup:			
 	if (retval) {
 		if (tty->count == 1)
-			info->tty = NULL; /* tty layer will release tty struct */
-		if(info->count)
-			info->count--;
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
 	}
 	
 	return retval;
@@ -4337,8 +4331,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
 		info->max_frame_size = 4096;
 		info->close_delay = 5*HZ/10;
 		info->closing_wait = 30*HZ;
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
+		tty_port_init(&info->port);
 		init_waitqueue_head(&info->status_event_wait_q);
 		init_waitqueue_head(&info->event_wait_q);
 		spin_lock_init(&info->irq_spinlock);
@@ -6575,7 +6568,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
 	unsigned int framesize = 0;
 	bool ReturnCode = false;
 	unsigned long flags;
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 	bool return_frame = false;
 	
 	/*
@@ -6774,7 +6767,7 @@ static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
 	unsigned int framesize = 0;
 	bool ReturnCode = false;
 	unsigned long flags;
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 
 	/*
  	 * current_rx_buffer points to the 1st buffer of the next available
@@ -7711,7 +7704,7 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
 	unsigned short new_crctype;
 
 	/* return error if TTY interface open */
-	if (info->count)
+	if (info->port.count)
 		return -EBUSY;
 
 	switch (encoding)
@@ -7808,7 +7801,7 @@ static int hdlcdev_open(struct net_device *dev)
 
 	/* arbitrate between network and tty opens */
 	spin_lock_irqsave(&info->netlock, flags);
-	if (info->count != 0 || info->netcount != 0) {
+	if (info->port.count != 0 || info->netcount != 0) {
 		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
 		spin_unlock_irqrestore(&info->netlock, flags);
 		return -EBUSY;
@@ -7894,7 +7887,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
 
 	/* return error if TTY interface open */
-	if (info->count)
+	if (info->port.count)
 		return -EBUSY;
 
 	if (cmd != SIOCWANDEV)
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 2001b0e..220eb04 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -244,11 +244,11 @@ struct _input_signal_events {
  */
 struct slgt_info {
 	void *if_ptr;		/* General purpose pointer (used by SPPP) */
+	struct tty_port port;
 
 	struct slgt_info *next_device;	/* device list link */
 
 	int magic;
-	int flags;
 
 	char device_name[25];
 	struct pci_dev *pdev;
@@ -260,23 +260,17 @@ struct slgt_info {
 	/* array of pointers to port contexts on this adapter */
 	struct slgt_info *port_array[SLGT_MAX_PORTS];
 
-	int			count;		/* count of opens */
 	int			line;		/* tty line instance number */
 	unsigned short		close_delay;
 	unsigned short		closing_wait;	/* time to wait before closing */
 
 	struct mgsl_icount	icount;
 
-	struct tty_struct 	*tty;
 	int			timeout;
 	int			x_char;		/* xon/xoff character */
-	int			blocked_open;	/* # of blocked opens */
 	unsigned int		read_status_mask;
 	unsigned int 		ignore_status_mask;
 
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-
 	wait_queue_head_t	status_event_wait_q;
 	wait_queue_head_t	event_wait_q;
 	struct timer_list	tx_timer;
@@ -672,20 +666,20 @@ static int open(struct tty_struct *tty, struct file *filp)
 	}
 
 	tty->driver_data = info;
-	info->tty = tty;
+	info->port.tty = tty;
 
-	DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
+	DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
 
 	/* If port is closing, signal caller to try again */
-	if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-		retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
 	}
 
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
@@ -693,10 +687,10 @@ static int open(struct tty_struct *tty, struct file *filp)
 		spin_unlock_irqrestore(&info->netlock, flags);
 		goto cleanup;
 	}
-	info->count++;
+	info->port.count++;
 	spin_unlock_irqrestore(&info->netlock, flags);
 
-	if (info->count == 1) {
+	if (info->port.count == 1) {
 		/* 1st open on this device, init hardware */
 		retval = startup(info);
 		if (retval < 0)
@@ -714,9 +708,9 @@ static int open(struct tty_struct *tty, struct file *filp)
 cleanup:
 	if (retval) {
 		if (tty->count == 1)
-			info->tty = NULL; /* tty layer will release tty struct */
-		if(info->count)
-			info->count--;
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
 	}
 
 	DBGINFO(("%s open rc=%d\n", info->device_name, retval));
@@ -729,32 +723,32 @@ static void close(struct tty_struct *tty, struct file *filp)
 
 	if (sanity_check(info, tty->name, "close"))
 		return;
-	DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
+	DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
 
-	if (!info->count)
+	if (!info->port.count)
 		return;
 
 	if (tty_hung_up_p(filp))
 		goto cleanup;
 
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (info->port.count != 1)) {
 		/*
 		 * tty->count is 1 and the tty structure will be freed.
-		 * info->count should be one in this case.
+		 * info->port.count should be one in this case.
 		 * if it's not, correct it so that the port is shutdown.
 		 */
 		DBGERR(("%s close: bad refcount; tty->count=1, "
-		       "info->count=%d\n", info->device_name, info->count));
-		info->count = 1;
+		       "info->port.count=%d\n", info->device_name, info->port.count));
+		info->port.count = 1;
 	}
 
-	info->count--;
+	info->port.count--;
 
 	/* if at least one open remaining, leave hardware active */
-	if (info->count)
+	if (info->port.count)
 		goto cleanup;
 
-	info->flags |= ASYNC_CLOSING;
+	info->port.flags |= ASYNC_CLOSING;
 
 	/* set tty->closing to notify line discipline to
 	 * only process XON/XOFF characters. Only the N_TTY
@@ -769,7 +763,7 @@ static void close(struct tty_struct *tty, struct file *filp)
 		tty_wait_until_sent(tty, info->closing_wait);
 	}
 
- 	if (info->flags & ASYNC_INITIALIZED)
+ 	if (info->port.flags & ASYNC_INITIALIZED)
  		wait_until_sent(tty, info->timeout);
 	flush_buffer(tty);
 	tty_ldisc_flush(tty);
@@ -777,21 +771,21 @@ static void close(struct tty_struct *tty, struct file *filp)
 	shutdown(info);
 
 	tty->closing = 0;
-	info->tty = NULL;
+	info->port.tty = NULL;
 
-	if (info->blocked_open) {
+	if (info->port.blocked_open) {
 		if (info->close_delay) {
 			msleep_interruptible(jiffies_to_msecs(info->close_delay));
 		}
-		wake_up_interruptible(&info->open_wait);
+		wake_up_interruptible(&info->port.open_wait);
 	}
 
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 
-	wake_up_interruptible(&info->close_wait);
+	wake_up_interruptible(&info->port.close_wait);
 
 cleanup:
-	DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
+	DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
 }
 
 static void hangup(struct tty_struct *tty)
@@ -805,11 +799,11 @@ static void hangup(struct tty_struct *tty)
 	flush_buffer(tty);
 	shutdown(info);
 
-	info->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = NULL;
+	info->port.count = 0;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
 
-	wake_up_interruptible(&info->open_wait);
+	wake_up_interruptible(&info->port.open_wait);
 }
 
 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
@@ -959,7 +953,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
 	if (sanity_check(info, tty->name, "wait_until_sent"))
 		return;
 	DBGINFO(("%s wait_until_sent entry\n", info->device_name));
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		goto exit;
 
 	orig_jiffies = jiffies;
@@ -1500,7 +1494,7 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
 	unsigned short new_crctype;
 
 	/* return error if TTY interface open */
-	if (info->count)
+	if (info->port.count)
 		return -EBUSY;
 
 	DBGINFO(("%s hdlcdev_attach\n", info->device_name));
@@ -1600,7 +1594,7 @@ static int hdlcdev_open(struct net_device *dev)
 
 	/* arbitrate between network and tty opens */
 	spin_lock_irqsave(&info->netlock, flags);
-	if (info->count != 0 || info->netcount != 0) {
+	if (info->port.count != 0 || info->netcount != 0) {
 		DBGINFO(("%s hdlc_open busy\n", dev->name));
 		spin_unlock_irqrestore(&info->netlock, flags);
 		return -EBUSY;
@@ -1685,7 +1679,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
 
 	/* return error if TTY interface open */
-	if (info->count)
+	if (info->port.count)
 		return -EBUSY;
 
 	if (cmd != SIOCWANDEV)
@@ -1906,7 +1900,7 @@ static void hdlcdev_exit(struct slgt_info *info)
  */
 static void rx_async(struct slgt_info *info)
 {
- 	struct tty_struct *tty = info->tty;
+ 	struct tty_struct *tty = info->port.tty;
  	struct mgsl_icount *icount = &info->icount;
 	unsigned int start, end;
 	unsigned char *p;
@@ -2057,7 +2051,7 @@ static void bh_handler(struct work_struct *work)
 
 static void bh_transmit(struct slgt_info *info)
 {
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 
 	DBGBH(("%s bh_transmit\n", info->device_name));
 	if (tty)
@@ -2103,17 +2097,17 @@ static void cts_change(struct slgt_info *info, unsigned short status)
 	wake_up_interruptible(&info->event_wait_q);
 	info->pending_bh |= BH_STATUS;
 
-	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->tty) {
-			if (info->tty->hw_stopped) {
+	if (info->port.flags & ASYNC_CTS_FLOW) {
+		if (info->port.tty) {
+			if (info->port.tty->hw_stopped) {
 				if (info->signals & SerialSignal_CTS) {
-		 			info->tty->hw_stopped = 0;
+		 			info->port.tty->hw_stopped = 0;
 					info->pending_bh |= BH_TRANSMIT;
 					return;
 				}
 			} else {
 				if (!(info->signals & SerialSignal_CTS))
-		 			info->tty->hw_stopped = 1;
+		 			info->port.tty->hw_stopped = 1;
 			}
 		}
 	}
@@ -2146,12 +2140,12 @@ static void dcd_change(struct slgt_info *info, unsigned short status)
 	wake_up_interruptible(&info->event_wait_q);
 	info->pending_bh |= BH_STATUS;
 
-	if (info->flags & ASYNC_CHECK_CD) {
+	if (info->port.flags & ASYNC_CHECK_CD) {
 		if (info->signals & SerialSignal_DCD)
-			wake_up_interruptible(&info->open_wait);
+			wake_up_interruptible(&info->port.open_wait);
 		else {
-			if (info->tty)
-				tty_hangup(info->tty);
+			if (info->port.tty)
+				tty_hangup(info->port.tty);
 		}
 	}
 }
@@ -2194,12 +2188,12 @@ static void isr_serial(struct slgt_info *info)
 		if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
 			info->icount.brk++;
 			/* process break detection if tty control allows */
-			if (info->tty) {
+			if (info->port.tty) {
 				if (!(status & info->ignore_status_mask)) {
 					if (info->read_status_mask & MASK_BREAK) {
-						tty_insert_flip_char(info->tty, 0, TTY_BREAK);
-						if (info->flags & ASYNC_SAK)
-							do_SAK(info->tty);
+						tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
+						if (info->port.flags & ASYNC_SAK)
+							do_SAK(info->port.tty);
 					}
 				}
 			}
@@ -2319,7 +2313,7 @@ static void isr_txeom(struct slgt_info *info, unsigned short status)
 		else
 #endif
 		{
-			if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+			if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
 				tx_stop(info);
 				return;
 			}
@@ -2395,7 +2389,7 @@ static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
 	for(i=0; i < info->port_count ; i++) {
 		struct slgt_info *port = info->port_array[i];
 
-		if (port && (port->count || port->netcount) &&
+		if (port && (port->port.count || port->netcount) &&
 		    port->pending_bh && !port->bh_running &&
 		    !port->bh_requested) {
 			DBGISR(("%s bh queued\n", port->device_name));
@@ -2414,7 +2408,7 @@ static int startup(struct slgt_info *info)
 {
 	DBGINFO(("%s startup\n", info->device_name));
 
-	if (info->flags & ASYNC_INITIALIZED)
+	if (info->port.flags & ASYNC_INITIALIZED)
 		return 0;
 
 	if (!info->tx_buf) {
@@ -2432,10 +2426,10 @@ static int startup(struct slgt_info *info)
 	/* program hardware for current parameters */
 	change_params(info);
 
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags |= ASYNC_INITIALIZED;
+	info->port.flags |= ASYNC_INITIALIZED;
 
 	return 0;
 }
@@ -2447,7 +2441,7 @@ static void shutdown(struct slgt_info *info)
 {
 	unsigned long flags;
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
 	DBGINFO(("%s shutdown\n", info->device_name));
@@ -2470,7 +2464,7 @@ static void shutdown(struct slgt_info *info)
 
 	slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
 
- 	if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
  		info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
 		set_signals(info);
 	}
@@ -2479,10 +2473,10 @@ static void shutdown(struct slgt_info *info)
 
 	spin_unlock_irqrestore(&info->lock,flags);
 
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags &= ~ASYNC_INITIALIZED;
+	info->port.flags &= ~ASYNC_INITIALIZED;
 }
 
 static void program_hw(struct slgt_info *info)
@@ -2511,7 +2505,7 @@ static void program_hw(struct slgt_info *info)
 	get_signals(info);
 
 	if (info->netcount ||
-	    (info->tty && info->tty->termios->c_cflag & CREAD))
+	    (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
 		rx_start(info);
 
 	spin_unlock_irqrestore(&info->lock,flags);
@@ -2525,11 +2519,11 @@ static void change_params(struct slgt_info *info)
 	unsigned cflag;
 	int bits_per_char;
 
-	if (!info->tty || !info->tty->termios)
+	if (!info->port.tty || !info->port.tty->termios)
 		return;
 	DBGINFO(("%s change_params\n", info->device_name));
 
-	cflag = info->tty->termios->c_cflag;
+	cflag = info->port.tty->termios->c_cflag;
 
 	/* if B0 rate (hangup) specified then negate DTR and RTS */
 	/* otherwise assert DTR and RTS */
@@ -2561,7 +2555,7 @@ static void change_params(struct slgt_info *info)
 	bits_per_char = info->params.data_bits +
 			info->params.stop_bits + 1;
 
-	info->params.data_rate = tty_get_baud_rate(info->tty);
+	info->params.data_rate = tty_get_baud_rate(info->port.tty);
 
 	if (info->params.data_rate) {
 		info->timeout = (32*HZ*bits_per_char) /
@@ -2570,30 +2564,30 @@ static void change_params(struct slgt_info *info)
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
 	if (cflag & CRTSCTS)
-		info->flags |= ASYNC_CTS_FLOW;
+		info->port.flags |= ASYNC_CTS_FLOW;
 	else
-		info->flags &= ~ASYNC_CTS_FLOW;
+		info->port.flags &= ~ASYNC_CTS_FLOW;
 
 	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
+		info->port.flags &= ~ASYNC_CHECK_CD;
 	else
-		info->flags |= ASYNC_CHECK_CD;
+		info->port.flags |= ASYNC_CHECK_CD;
 
 	/* process tty input control flags */
 
 	info->read_status_mask = IRQ_RXOVER;
-	if (I_INPCK(info->tty))
+	if (I_INPCK(info->port.tty))
 		info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
- 	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
  		info->read_status_mask |= MASK_BREAK;
-	if (I_IGNPAR(info->tty))
+	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
-	if (I_IGNBRK(info->tty)) {
+	if (I_IGNBRK(info->port.tty)) {
 		info->ignore_status_mask |= MASK_BREAK;
 		/* If ignoring parity and break indicators, ignore
 		 * overruns too.  (For real raw support).
 		 */
-		if (I_IGNPAR(info->tty))
+		if (I_IGNPAR(info->port.tty))
 			info->ignore_status_mask |= MASK_OVERRUN;
 	}
 
@@ -3144,7 +3138,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
 	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
 		/* nonblock mode is set or port is not enabled */
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
@@ -3153,21 +3147,21 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
 	/* Wait for carrier detect and the line to become
 	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
+	 * this loop, info->port.count is dropped by one, so that
 	 * close() knows when to free things.  We restore it upon
 	 * exit, either normal or abnormal.
 	 */
 
 	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
+	add_wait_queue(&info->port.open_wait, &wait);
 
 	spin_lock_irqsave(&info->lock, flags);
 	if (!tty_hung_up_p(filp)) {
 		extra_count = true;
-		info->count--;
+		info->port.count--;
 	}
 	spin_unlock_irqrestore(&info->lock, flags);
-	info->blocked_open++;
+	info->port.blocked_open++;
 
 	while (1) {
 		if ((tty->termios->c_cflag & CBAUD)) {
@@ -3179,8 +3173,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
-		if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
-			retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+		if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+			retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
 					-EAGAIN : -ERESTARTSYS;
 			break;
 		}
@@ -3189,7 +3183,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	 	get_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 
- 		if (!(info->flags & ASYNC_CLOSING) &&
+ 		if (!(info->port.flags & ASYNC_CLOSING) &&
  		    (do_clocal || (info->signals & SerialSignal_DCD)) ) {
  			break;
 		}
@@ -3204,14 +3198,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	}
 
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
+	remove_wait_queue(&info->port.open_wait, &wait);
 
 	if (extra_count)
-		info->count++;
-	info->blocked_open--;
+		info->port.count++;
+	info->port.blocked_open--;
 
 	if (!retval)
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 
 	DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
 	return retval;
@@ -3460,8 +3454,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev
 		info->raw_rx_size = DMABUFSIZE;
 		info->close_delay = 5*HZ/10;
 		info->closing_wait = 30*HZ;
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
+		tty_port_init(&info->port);
 		init_waitqueue_head(&info->status_event_wait_q);
 		init_waitqueue_head(&info->event_wait_q);
 		spin_lock_init(&info->netlock);
@@ -4505,7 +4498,7 @@ static bool rx_get_frame(struct slgt_info *info)
 	unsigned short status;
 	unsigned int framesize = 0;
 	unsigned long flags;
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 	unsigned char addr_field = 0xff;
 	unsigned int crc_size = 0;
 
@@ -4656,7 +4649,7 @@ static bool rx_get_buf(struct slgt_info *info)
 	DBGDATA(info, info->rbufs[i].buf, count, "rx");
 	DBGINFO(("rx_get_buf size=%d\n", count));
 	if (count)
-		ldisc_receive_buf(info->tty, info->rbufs[i].buf,
+		ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
 				  info->flag_buf, count);
 	free_rbufs(info, i, i);
 	return true;
@@ -4765,11 +4758,11 @@ static int irq_test(struct slgt_info *info)
 {
 	unsigned long timeout;
 	unsigned long flags;
-	struct tty_struct *oldtty = info->tty;
+	struct tty_struct *oldtty = info->port.tty;
 	u32 speed = info->params.data_rate;
 
 	info->params.data_rate = 921600;
-	info->tty = NULL;
+	info->port.tty = NULL;
 
 	spin_lock_irqsave(&info->lock, flags);
 	async_mode(info);
@@ -4797,7 +4790,7 @@ static int irq_test(struct slgt_info *info)
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	info->params.data_rate = speed;
-	info->tty = oldtty;
+	info->port.tty = oldtty;
 
 	info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
 	return info->irq_occurred ? 0 : -ENODEV;
@@ -4837,7 +4830,7 @@ static int loopback_test(struct slgt_info *info)
 	int rc = -ENODEV;
 	unsigned long flags;
 
-	struct tty_struct *oldtty = info->tty;
+	struct tty_struct *oldtty = info->port.tty;
 	MGSL_PARAMS params;
 
 	memcpy(&params, &info->params, sizeof(params));
@@ -4845,7 +4838,7 @@ static int loopback_test(struct slgt_info *info)
 	info->params.mode = MGSL_MODE_ASYNC;
 	info->params.data_rate = 921600;
 	info->params.loopback = 1;
-	info->tty = NULL;
+	info->port.tty = NULL;
 
 	/* build and send transmit frame */
 	for (count = 0; count < TESTFRAMESIZE; ++count)
@@ -4883,7 +4876,7 @@ static int loopback_test(struct slgt_info *info)
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	memcpy(&info->params, &params, sizeof(info->params));
-	info->tty = oldtty;
+	info->port.tty = oldtty;
 
 	info->init_error = rc ? DiagStatus_DmaFailure : 0;
 	return rc;
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index bec5486..5952925 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -151,18 +151,15 @@ struct	_input_signal_events {
 typedef struct _synclinkmp_info {
 	void *if_ptr;				/* General purpose pointer (used by SPPP) */
 	int			magic;
-	int			flags;
-	int			count;		/* count of opens */
+	struct tty_port		port;
 	int			line;
 	unsigned short		close_delay;
 	unsigned short		closing_wait;	/* time to wait before closing */
 
 	struct mgsl_icount	icount;
 
-	struct tty_struct 	*tty;
 	int			timeout;
 	int			x_char;		/* xon/xoff character */
-	int			blocked_open;	/* # of blocked opens */
 	u16			read_status_mask1;  /* break detection (SR1 indications) */
 	u16			read_status_mask2;  /* parity/framing/overun (SR2 indications) */
 	unsigned char 		ignore_status_mask1;  /* break detection (SR1 indications) */
@@ -172,9 +169,6 @@ typedef struct _synclinkmp_info {
 	int			tx_get;
 	int			tx_count;
 
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-
 	wait_queue_head_t	status_event_wait_q;
 	wait_queue_head_t	event_wait_q;
 	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
@@ -462,13 +456,13 @@ static int synclinkmp_device_count = 0;
  * .text section address and breakpoint on module load.
  * This is useful for use with gdb and add-symbol-file command.
  */
-static int break_on_load=0;
+static int break_on_load = 0;
 
 /*
  * Driver major number, defaults to zero to get auto
  * assigned major number. May be forced as module parameter.
  */
-static int ttymajor=0;
+static int ttymajor = 0;
 
 /*
  * Array of user specified options for ISA adapters.
@@ -747,22 +741,22 @@ static int open(struct tty_struct *tty, struct file *filp)
 	}
 
 	tty->driver_data = info;
-	info->tty = tty;
+	info->port.tty = tty;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s open(), old ref count = %d\n",
-			 __FILE__,__LINE__,tty->driver->name, info->count);
+			 __FILE__,__LINE__,tty->driver->name, info->port.count);
 
 	/* If port is closing, signal caller to try again */
-	if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-		retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
 	}
 
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
@@ -770,10 +764,10 @@ static int open(struct tty_struct *tty, struct file *filp)
 		spin_unlock_irqrestore(&info->netlock, flags);
 		goto cleanup;
 	}
-	info->count++;
+	info->port.count++;
 	spin_unlock_irqrestore(&info->netlock, flags);
 
-	if (info->count == 1) {
+	if (info->port.count == 1) {
 		/* 1st open on this device, init hardware */
 		retval = startup(info);
 		if (retval < 0)
@@ -796,9 +790,9 @@ static int open(struct tty_struct *tty, struct file *filp)
 cleanup:
 	if (retval) {
 		if (tty->count == 1)
-			info->tty = NULL; /* tty layer will release tty struct */
-		if(info->count)
-			info->count--;
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
 	}
 
 	return retval;
@@ -816,33 +810,33 @@ static void close(struct tty_struct *tty, struct file *filp)
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s close() entry, count=%d\n",
-			 __FILE__,__LINE__, info->device_name, info->count);
+			 __FILE__,__LINE__, info->device_name, info->port.count);
 
-	if (!info->count)
+	if (!info->port.count)
 		return;
 
 	if (tty_hung_up_p(filp))
 		goto cleanup;
 
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (info->port.count != 1)) {
 		/*
 		 * tty->count is 1 and the tty structure will be freed.
-		 * info->count should be one in this case.
+		 * info->port.count should be one in this case.
 		 * if it's not, correct it so that the port is shutdown.
 		 */
 		printk("%s(%d):%s close: bad refcount; tty->count is 1, "
-		       "info->count is %d\n",
-			 __FILE__,__LINE__, info->device_name, info->count);
-		info->count = 1;
+		       "info->port.count is %d\n",
+			 __FILE__,__LINE__, info->device_name, info->port.count);
+		info->port.count = 1;
 	}
 
-	info->count--;
+	info->port.count--;
 
 	/* if at least one open remaining, leave hardware active */
-	if (info->count)
+	if (info->port.count)
 		goto cleanup;
 
-	info->flags |= ASYNC_CLOSING;
+	info->port.flags |= ASYNC_CLOSING;
 
 	/* set tty->closing to notify line discipline to
 	 * only process XON/XOFF characters. Only the N_TTY
@@ -859,7 +853,7 @@ static void close(struct tty_struct *tty, struct file *filp)
 		tty_wait_until_sent(tty, info->closing_wait);
 	}
 
- 	if (info->flags & ASYNC_INITIALIZED)
+ 	if (info->port.flags & ASYNC_INITIALIZED)
  		wait_until_sent(tty, info->timeout);
 
 	flush_buffer(tty);
@@ -869,23 +863,23 @@ static void close(struct tty_struct *tty, struct file *filp)
 	shutdown(info);
 
 	tty->closing = 0;
-	info->tty = NULL;
+	info->port.tty = NULL;
 
-	if (info->blocked_open) {
+	if (info->port.blocked_open) {
 		if (info->close_delay) {
 			msleep_interruptible(jiffies_to_msecs(info->close_delay));
 		}
-		wake_up_interruptible(&info->open_wait);
+		wake_up_interruptible(&info->port.open_wait);
 	}
 
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 
-	wake_up_interruptible(&info->close_wait);
+	wake_up_interruptible(&info->port.close_wait);
 
 cleanup:
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
-			tty->driver->name, info->count);
+			tty->driver->name, info->port.count);
 }
 
 /* Called by tty_hangup() when a hangup is signaled.
@@ -905,11 +899,11 @@ static void hangup(struct tty_struct *tty)
 	flush_buffer(tty);
 	shutdown(info);
 
-	info->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = NULL;
+	info->port.count = 0;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
 
-	wake_up_interruptible(&info->open_wait);
+	wake_up_interruptible(&info->port.open_wait);
 }
 
 /* Set new termios settings
@@ -1123,7 +1117,7 @@ static void wait_until_sent(struct tty_struct *tty, int timeout)
 
 	lock_kernel();
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		goto exit;
 
 	orig_jiffies = jiffies;
@@ -1636,7 +1630,7 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
 	unsigned short new_crctype;
 
 	/* return error if TTY interface open */
-	if (info->count)
+	if (info->port.count)
 		return -EBUSY;
 
 	switch (encoding)
@@ -1733,7 +1727,7 @@ static int hdlcdev_open(struct net_device *dev)
 
 	/* arbitrate between network and tty opens */
 	spin_lock_irqsave(&info->netlock, flags);
-	if (info->count != 0 || info->netcount != 0) {
+	if (info->port.count != 0 || info->netcount != 0) {
 		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
 		spin_unlock_irqrestore(&info->netlock, flags);
 		return -EBUSY;
@@ -1819,7 +1813,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
 
 	/* return error if TTY interface open */
-	if (info->count)
+	if (info->port.count)
 		return -EBUSY;
 
 	if (cmd != SIOCWANDEV)
@@ -2128,7 +2122,7 @@ static void bh_receive(SLMP_INFO *info)
 
 static void bh_transmit(SLMP_INFO *info)
 {
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 
 	if ( debug_level >= DEBUG_LEVEL_BH )
 		printk( "%s(%d):%s bh_transmit() entry\n",
@@ -2178,7 +2172,7 @@ static void isr_timer(SLMP_INFO * info)
 
 static void isr_rxint(SLMP_INFO * info)
 {
- 	struct tty_struct *tty = info->tty;
+ 	struct tty_struct *tty = info->port.tty;
  	struct	mgsl_icount *icount = &info->icount;
 	unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
 	unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
@@ -2205,7 +2199,7 @@ static void isr_rxint(SLMP_INFO * info)
 				if (!(status & info->ignore_status_mask1)) {
 					if (info->read_status_mask1 & BRKD) {
 						tty_insert_flip_char(tty, 0, TTY_BREAK);
-						if (info->flags & ASYNC_SAK)
+						if (info->port.flags & ASYNC_SAK)
 							do_SAK(tty);
 					}
 				}
@@ -2239,7 +2233,7 @@ static void isr_rxrdy(SLMP_INFO * info)
 {
 	u16 status;
 	unsigned char DataByte;
- 	struct tty_struct *tty = info->tty;
+ 	struct tty_struct *tty = info->port.tty;
  	struct	mgsl_icount *icount = &info->icount;
 
 	if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -2352,7 +2346,7 @@ static void isr_txeom(SLMP_INFO * info, unsigned char status)
 		else
 #endif
 		{
-			if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+			if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
 				tx_stop(info);
 				return;
 			}
@@ -2407,7 +2401,7 @@ static void isr_txrdy(SLMP_INFO * info)
 		return;
 	}
 
-	if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+	if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
 		tx_stop(info);
 		return;
 	}
@@ -2554,29 +2548,29 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 		wake_up_interruptible(&info->status_event_wait_q);
 		wake_up_interruptible(&info->event_wait_q);
 
-		if ( (info->flags & ASYNC_CHECK_CD) &&
+		if ( (info->port.flags & ASYNC_CHECK_CD) &&
 		     (status & MISCSTATUS_DCD_LATCHED) ) {
 			if ( debug_level >= DEBUG_LEVEL_ISR )
 				printk("%s CD now %s...", info->device_name,
 				       (status & SerialSignal_DCD) ? "on" : "off");
 			if (status & SerialSignal_DCD)
-				wake_up_interruptible(&info->open_wait);
+				wake_up_interruptible(&info->port.open_wait);
 			else {
 				if ( debug_level >= DEBUG_LEVEL_ISR )
 					printk("doing serial hangup...");
-				if (info->tty)
-					tty_hangup(info->tty);
+				if (info->port.tty)
+					tty_hangup(info->port.tty);
 			}
 		}
 
-		if ( (info->flags & ASYNC_CTS_FLOW) &&
+		if ( (info->port.flags & ASYNC_CTS_FLOW) &&
 		     (status & MISCSTATUS_CTS_LATCHED) ) {
-			if ( info->tty ) {
-				if (info->tty->hw_stopped) {
+			if ( info->port.tty ) {
+				if (info->port.tty->hw_stopped) {
 					if (status & SerialSignal_CTS) {
 						if ( debug_level >= DEBUG_LEVEL_ISR )
 							printk("CTS tx start...");
-			 			info->tty->hw_stopped = 0;
+			 			info->port.tty->hw_stopped = 0;
 						tx_start(info);
 						info->pending_bh |= BH_TRANSMIT;
 						return;
@@ -2585,7 +2579,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 					if (!(status & SerialSignal_CTS)) {
 						if ( debug_level >= DEBUG_LEVEL_ISR )
 							printk("CTS tx stop...");
-			 			info->tty->hw_stopped = 1;
+			 			info->port.tty->hw_stopped = 1;
 						tx_stop(info);
 					}
 				}
@@ -2701,7 +2695,7 @@ static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
 		 * do not request bottom half processing if the
 		 * device is not open in a normal mode.
 		 */
-		if ( port && (port->count || port->netcount) &&
+		if ( port && (port->port.count || port->netcount) &&
 		     port->pending_bh && !port->bh_running &&
 		     !port->bh_requested ) {
 			if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -2727,7 +2721,7 @@ static int startup(SLMP_INFO * info)
 	if ( debug_level >= DEBUG_LEVEL_INFO )
 		printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
 
-	if (info->flags & ASYNC_INITIALIZED)
+	if (info->port.flags & ASYNC_INITIALIZED)
 		return 0;
 
 	if (!info->tx_buf) {
@@ -2750,10 +2744,10 @@ static int startup(SLMP_INFO * info)
 
 	mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
 
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags |= ASYNC_INITIALIZED;
+	info->port.flags |= ASYNC_INITIALIZED;
 
 	return 0;
 }
@@ -2764,7 +2758,7 @@ static void shutdown(SLMP_INFO * info)
 {
 	unsigned long flags;
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
@@ -2786,17 +2780,17 @@ static void shutdown(SLMP_INFO * info)
 
 	reset_port(info);
 
- 	if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
  		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
 		set_signals(info);
 	}
 
 	spin_unlock_irqrestore(&info->lock,flags);
 
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags &= ~ASYNC_INITIALIZED;
+	info->port.flags &= ~ASYNC_INITIALIZED;
 }
 
 static void program_hw(SLMP_INFO *info)
@@ -2827,7 +2821,7 @@ static void program_hw(SLMP_INFO *info)
 
 	get_signals(info);
 
-	if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
+	if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
 		rx_start(info);
 
 	spin_unlock_irqrestore(&info->lock,flags);
@@ -2840,14 +2834,14 @@ static void change_params(SLMP_INFO *info)
 	unsigned cflag;
 	int bits_per_char;
 
-	if (!info->tty || !info->tty->termios)
+	if (!info->port.tty || !info->port.tty->termios)
 		return;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s change_params()\n",
 			 __FILE__,__LINE__, info->device_name );
 
-	cflag = info->tty->termios->c_cflag;
+	cflag = info->port.tty->termios->c_cflag;
 
 	/* if B0 rate (hangup) specified then negate DTR and RTS */
 	/* otherwise assert DTR and RTS */
@@ -2895,7 +2889,7 @@ static void change_params(SLMP_INFO *info)
 	 * current data rate.
 	 */
 	if (info->params.data_rate <= 460800) {
-		info->params.data_rate = tty_get_baud_rate(info->tty);
+		info->params.data_rate = tty_get_baud_rate(info->port.tty);
 	}
 
 	if ( info->params.data_rate ) {
@@ -2905,30 +2899,30 @@ static void change_params(SLMP_INFO *info)
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
 	if (cflag & CRTSCTS)
-		info->flags |= ASYNC_CTS_FLOW;
+		info->port.flags |= ASYNC_CTS_FLOW;
 	else
-		info->flags &= ~ASYNC_CTS_FLOW;
+		info->port.flags &= ~ASYNC_CTS_FLOW;
 
 	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
+		info->port.flags &= ~ASYNC_CHECK_CD;
 	else
-		info->flags |= ASYNC_CHECK_CD;
+		info->port.flags |= ASYNC_CHECK_CD;
 
 	/* process tty input control flags */
 
 	info->read_status_mask2 = OVRN;
-	if (I_INPCK(info->tty))
+	if (I_INPCK(info->port.tty))
 		info->read_status_mask2 |= PE | FRME;
- 	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
  		info->read_status_mask1 |= BRKD;
-	if (I_IGNPAR(info->tty))
+	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask2 |= PE | FRME;
-	if (I_IGNBRK(info->tty)) {
+	if (I_IGNBRK(info->port.tty)) {
 		info->ignore_status_mask1 |= BRKD;
 		/* If ignoring parity and break indicators, ignore
 		 * overruns too.  (For real raw support).
 		 */
-		if (I_IGNPAR(info->tty))
+		if (I_IGNPAR(info->port.tty))
 			info->ignore_status_mask2 |= OVRN;
 	}
 
@@ -3348,7 +3342,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
 		/* nonblock mode is set or port is not enabled */
 		/* just verify that callout device is not active */
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 
@@ -3357,25 +3351,25 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
 	/* Wait for carrier detect and the line to become
 	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
+	 * this loop, info->port.count is dropped by one, so that
 	 * close() knows when to free things.  We restore it upon
 	 * exit, either normal or abnormal.
 	 */
 
 	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
+	add_wait_queue(&info->port.open_wait, &wait);
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s block_til_ready() before block, count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, info->count );
+			 __FILE__,__LINE__, tty->driver->name, info->port.count );
 
 	spin_lock_irqsave(&info->lock, flags);
 	if (!tty_hung_up_p(filp)) {
 		extra_count = true;
-		info->count--;
+		info->port.count--;
 	}
 	spin_unlock_irqrestore(&info->lock, flags);
-	info->blocked_open++;
+	info->port.blocked_open++;
 
 	while (1) {
 		if ((tty->termios->c_cflag & CBAUD)) {
@@ -3387,8 +3381,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
-		if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
-			retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+		if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
+			retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
 					-EAGAIN : -ERESTARTSYS;
 			break;
 		}
@@ -3397,7 +3391,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	 	get_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 
- 		if (!(info->flags & ASYNC_CLOSING) &&
+ 		if (!(info->port.flags & ASYNC_CLOSING) &&
  		    (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
  			break;
 		}
@@ -3409,24 +3403,24 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
 		if (debug_level >= DEBUG_LEVEL_INFO)
 			printk("%s(%d):%s block_til_ready() count=%d\n",
-				 __FILE__,__LINE__, tty->driver->name, info->count );
+				 __FILE__,__LINE__, tty->driver->name, info->port.count );
 
 		schedule();
 	}
 
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
+	remove_wait_queue(&info->port.open_wait, &wait);
 
 	if (extra_count)
-		info->count++;
-	info->blocked_open--;
+		info->port.count++;
+	info->port.blocked_open--;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s block_til_ready() after, count=%d\n",
-			 __FILE__,__LINE__, tty->driver->name, info->count );
+			 __FILE__,__LINE__, tty->driver->name, info->port.count );
 
 	if (!retval)
-		info->flags |= ASYNC_NORMAL_ACTIVE;
+		info->port.flags |= ASYNC_NORMAL_ACTIVE;
 
 	return retval;
 }
@@ -3813,8 +3807,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
 		info->max_frame_size = 4096;
 		info->close_delay = 5*HZ/10;
 		info->closing_wait = 30*HZ;
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
+		tty_port_init(&info->port);
 		init_waitqueue_head(&info->status_event_wait_q);
 		init_waitqueue_head(&info->event_wait_q);
 		spin_lock_init(&info->netlock);
@@ -4885,7 +4878,7 @@ static bool rx_get_frame(SLMP_INFO *info)
 	unsigned int framesize = 0;
 	bool ReturnCode = false;
 	unsigned long flags;
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 	unsigned char addr_field = 0xff;
    	SCADESC *desc;
 	SCADESC_EX *desc_ex;
@@ -5293,11 +5286,11 @@ static bool loopback_test(SLMP_INFO *info)
 	bool rc = false;
 	unsigned long flags;
 
-	struct tty_struct *oldtty = info->tty;
+	struct tty_struct *oldtty = info->port.tty;
 	u32 speed = info->params.clock_speed;
 
 	info->params.clock_speed = 3686400;
-	info->tty = NULL;
+	info->port.tty = NULL;
 
 	/* assume failure */
 	info->init_error = DiagStatus_DmaFailure;
@@ -5341,7 +5334,7 @@ static bool loopback_test(SLMP_INFO *info)
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	info->params.clock_speed = speed;
-	info->tty = oldtty;
+	info->port.tty = oldtty;
 
 	return rc;
 }


  parent reply	other threads:[~2008-05-19 15:05 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-19 14:50 [PATCH 00/20] Implment a tty port structure and supporting logic Alan Cox
2008-05-19 14:50 ` [PATCH 01/20] tty: Introduce a tty_port common structure Alan Cox
2008-05-19 17:47   ` Sam Ravnborg
2008-05-19 17:51     ` Greg KH
2008-05-19 19:48       ` Alan Cox
2008-05-19 21:36         ` Greg KH
2008-05-19 14:50 ` [PATCH 02/20] tty: Clean up tiocmset Alan Cox
2008-05-19 14:50 ` [PATCH 03/20] epca: use tty_port Alan Cox
2008-05-19 14:50 ` [PATCH 04/20] isicom: " Alan Cox
2008-05-19 14:50 ` [PATCH 05/20] moxa: " Alan Cox
2008-05-19 14:50 ` [PATCH 06/20] mxser: " Alan Cox
2008-05-19 14:50 ` [PATCH 07/20] riscom8: " Alan Cox
2008-05-19 14:50 ` [PATCH 08/20] rocket: " Alan Cox
2008-05-19 14:50 ` Alan Cox [this message]
2008-05-19 14:51 ` [PATCH 10/20] esp: " Alan Cox
2008-05-19 14:51 ` [PATCH 11/20] istallion: " Alan Cox
2008-05-19 14:51 ` [PATCH 12/20] stallion: " Alan Cox
2008-05-19 14:51 ` [PATCH 13/20] cyclades: " Alan Cox
2008-05-19 14:51 ` [PATCH 14/20] gs: " Alan Cox
2008-05-19 14:51 ` [PATCH 15/20] serial: " Alan Cox
2008-05-19 14:51 ` [PATCH 17/20] riscom8: remove bogus checks Alan Cox
2008-05-19 14:51 ` [PATCH 18/20] tty: add more tty_port fields Alan Cox
2008-05-19 14:51 ` [PATCH 19/20] whiteheat: coding style Alan Cox
2008-05-19 14:52 ` [PATCH 20/20] whiteheat: fix bugs found in the tidy and audit Alan Cox
2008-05-19 16:50 ` [PATCH 00/20] Implment a tty port structure and supporting logic Greg KH
2008-05-19 18:27   ` Alan Cox
2008-05-20  8:52   ` Andrew Morton
2008-05-20 17:23     ` Greg KH
2008-05-20 18:53       ` Alan Cox
2008-05-19 22:39 ` Aristeu Rozanski
2008-05-20  8:31   ` Alan Cox
2008-05-27 18:05 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080519145056.19326.59447.stgit@core \
    --to=alan@lxorguk.ukuu.org.uk \
    --cc=akpm@osdl.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.