From: jochen s <bumkunjo@gmx.de>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
Date: Tue, 20 May 2008 13:21:49 +0200 [thread overview]
Message-ID: <200805201321.49598.bumkunjo@gmx.de> (raw)
In-Reply-To: <1210721429.14631.5.camel@media1>
I tried to use the xc-test branch with this card and loading the driver with
option card=5 looks good:
468.353850] cx23885 driver version 0.0.1 loaded
[ 468.354084] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 468.354213] CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV
DVB-T Dual Express [card=5,insmod option]
[ 468.402021] input: i2c IR (FusionHDTV) as /class/input/input6
[ 468.402153] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-2/2-006b/ir0
[cx23885[0]]
[ 468.402157] cx23885[0]: i2c bus 0 registered
[ 468.402814] cx23885[0]: i2c bus 1 registered
[ 468.402950] cx23885[0]: i2c bus 2 registered
[ 468.424684] cx23885[0]: cx23885 based dvb card
[ 468.427525] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 468.427625] DVB: registering new adapter (cx23885[0])
[ 468.427723] DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
[ 468.428072] cx23885[0]: cx23885 based dvb card
[ 468.430856] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 468.430954] DVB: registering new adapter (cx23885[0])
[ 468.431051] DVB: registering frontend 2 (Zarlink ZL10353 DVB-T)...
[ 468.431383] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency:
0, mmio: 0xfd600000
[ 468.431392] PCI: Setting latency timer of device 0000:02:00.0 to 64
but when tuning to a channel via VDR it does not work - i got STR 0% SNR 0%
and immediately after changing to the card my system load goes up and I got
the following messages (continuing):
[ 590.342432] xc2028 2-0061: Loading 3 firmware images from
xc3028-dvico-au-01.fw, type: DViCO DualDig4/Nano2 (Australia), ver 2.7
[ 590.344845] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 590.838414] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 592.654769] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 593.522195] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 595.363939] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 595.927471] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
then syslog is full of these messages - so I assume something went wrong -
seems like the firmware doesn't match or loading the firmware fails in a way?
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-05-20 11:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-13 8:57 [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be stev391
2008-05-13 23:30 ` allan k
2008-05-20 11:21 ` jochen s [this message]
2008-05-13 23:37 ` allan k
-- strict thread matches above, loose matches on Subject: below --
2008-05-14 0:30 stev391
2008-05-13 23:55 stev391
2008-05-14 0:11 ` allan k
2008-05-13 23:52 stev391
2008-05-14 0:14 ` allan k
2008-05-10 8:14 stev391
2008-05-13 7:21 ` allan k
2008-05-13 8:19 ` allan k
2008-05-13 11:22 ` allan k
2008-05-08 10:02 sonofzev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805201321.49598.bumkunjo@gmx.de \
--to=bumkunjo@gmx.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.