All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Paul Mackerras <paulus@samba.org>
Cc: David Brownell <david-b@pacbell.net>, linuxppc-dev@ozlabs.org
Subject: [PATCH] [POWERPC] booting-without-of: fix GPIO section mis-numbering
Date: Fri, 23 May 2008 16:14:17 +0400	[thread overview]
Message-ID: <20080523121417.GA8300@polina.dev.rtsoft.ru> (raw)

"Specifying GPIO information for devices" should be IX-th section,
not VIII-th.

Thanks to David Brownell for noticing.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 Documentation/powerpc/booting-without-of.txt |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..0f83d43 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -88,7 +88,7 @@ Table of Contents
     3) OpenPIC Interrupt Controllers
     4) ISA Interrupt Controllers
 
-  VIII - Specifying GPIO information for devices
+  IX - Specifying GPIO information for devices
     1) gpios property
     2) gpio-controller nodes
 
@@ -3477,8 +3477,8 @@ encodings listed below:
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-VIII - Specifying GPIO information for devices
-==============================================
+IX - Specifying GPIO information for devices
+============================================
 
 1) gpios property
 -----------------
-- 
1.5.5.1

                 reply	other threads:[~2008-05-23 12:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080523121417.GA8300@polina.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=david-b@pacbell.net \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.