From: Neil Horman <nhorman@tuxdriver.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org, davem@davemloft.net, nhorman@tuxdriver.com
Subject: Re: [PATCH] tcrypt: add self test for des3_ebe cipher operating in cbc mode
Date: Fri, 23 May 2008 20:34:58 -0400 [thread overview]
Message-ID: <20080524003458.GB10168@localhost.localdomain> (raw)
In-Reply-To: <20080524000624.GB26747@gondor.apana.org.au>
On Sat, May 24, 2008 at 10:06:25AM +1000, Herbert Xu wrote:
> Could you document the source of these vectors in the patch
> description please?
Sure, reposting
Patch to add checking of DES3 test vectors using CBC mode. FIPS-140-2
compliance mandates that any supported mode of operation must include a self
test. This satisfies that requirement for cbc(des3_ede). The included test
vector was generated by me using openssl. Key/IV was generated with the
following command:
openssl enc -des_ede_cbc -P
input and output values were generated by repeating the string "Too many
secrets" a few times over, truncating it to 128 bytes, and encrypting it with
openssl using the aformentioned key. Tested successfully by myself
Regards
Neil
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
tcrypt.c | 8 +++++
tcrypt.h | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 98 insertions(+), 3 deletions(-)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 6beabc5..649a8e4 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -1180,6 +1180,14 @@ static void do_test(void)
test_cipher("ecb(des3_ede)", DECRYPT, des3_ede_dec_tv_template,
DES3_EDE_DEC_TEST_VECTORS);
+ test_cipher("cbc(des3_ede)", ENCRYPT,
+ des3_ede_cbc_enc_tv_template,
+ DES3_EDE_CBC_ENC_TEST_VECTORS);
+
+ test_cipher("cbc(des3_ede)", DECRYPT,
+ des3_ede_cbc_dec_tv_template,
+ DES3_EDE_CBC_DEC_TEST_VECTORS);
+
test_hash("md4", md4_tv_template, MD4_TEST_VECTORS);
test_hash("sha224", sha224_tv_template, SHA224_TEST_VECTORS);
diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h
index 47bc0ec..8893733 100644
--- a/crypto/tcrypt.h
+++ b/crypto/tcrypt.h
@@ -1442,6 +1442,8 @@ static struct hash_testvec hmac_sha512_tv_template[] = {
#define DES_CBC_DEC_TEST_VECTORS 4
#define DES3_EDE_ENC_TEST_VECTORS 3
#define DES3_EDE_DEC_TEST_VECTORS 3
+#define DES3_EDE_CBC_ENC_TEST_VECTORS 1
+#define DES3_EDE_CBC_DEC_TEST_VECTORS 1
static struct cipher_testvec des_enc_tv_template[] = {
{ /* From Applied Cryptography */
@@ -1680,9 +1682,6 @@ static struct cipher_testvec des_cbc_dec_tv_template[] = {
},
};
-/*
- * We really need some more test vectors, especially for DES3 CBC.
- */
static struct cipher_testvec des3_ede_enc_tv_template[] = {
{ /* These are from openssl */
.key = "\x01\x23\x45\x67\x89\xab\xcd\xef"
@@ -1745,6 +1744,94 @@ static struct cipher_testvec des3_ede_dec_tv_template[] = {
},
};
+static struct cipher_testvec des3_ede_cbc_enc_tv_template[] = {
+ { /* Generated from openssl */
+ .key = "\xE9\xC0\xFF\x2E\x76\x0B\x64\x24"
+ "\x44\x4D\x99\x5A\x12\xD6\x40\xC0"
+ "\xEA\xC2\x84\xE8\x14\x95\xDB\xE8",
+ .klen = 24,
+ .iv = "\x7D\x33\x88\x93\x0F\x93\xB2\x42",
+ .input = "\x6f\x54\x20\x6f\x61\x4d\x79\x6e"
+ "\x53\x20\x63\x65\x65\x72\x73\x74"
+ "\x54\x20\x6f\x6f\x4d\x20\x6e\x61"
+ "\x20\x79\x65\x53\x72\x63\x74\x65"
+ "\x20\x73\x6f\x54\x20\x6f\x61\x4d"
+ "\x79\x6e\x53\x20\x63\x65\x65\x72"
+ "\x73\x74\x54\x20\x6f\x6f\x4d\x20"
+ "\x6e\x61\x20\x79\x65\x53\x72\x63"
+ "\x74\x65\x20\x73\x6f\x54\x20\x6f"
+ "\x61\x4d\x79\x6e\x53\x20\x63\x65"
+ "\x65\x72\x73\x74\x54\x20\x6f\x6f"
+ "\x4d\x20\x6e\x61\x20\x79\x65\x53"
+ "\x72\x63\x74\x65\x20\x73\x6f\x54"
+ "\x20\x6f\x61\x4d\x79\x6e\x53\x20"
+ "\x63\x65\x65\x72\x73\x74\x54\x20"
+ "\x6f\x6f\x4d\x20\x6e\x61\x0a\x79",
+ .ilen = 128,
+ .result = "\x15\x8d\x5d\x34\x1b\x3f\xda\xda"
+ "\x4f\xce\x21\x82\x12\x54\x21\x0d"
+ "\xb2\x36\xda\xcc\xff\xb2\xff\x79"
+ "\x30\xe9\x95\xf4\x52\xf6\xf1\x43"
+ "\xf2\x88\xe1\x1c\x42\xa1\x6a\x11"
+ "\xda\x8f\xbd\x94\x5e\xe5\xa8\x43"
+ "\xe4\x4f\xbd\x0d\x1e\x67\xa1\x89"
+ "\x9a\x4e\x66\x62\x50\xb3\x07\x3e"
+ "\xc8\xc1\x87\x3d\x96\x62\xf7\xe7"
+ "\x96\x15\xa8\x34\xb6\x94\x1a\x17"
+ "\x05\xde\x62\xd6\xd8\x73\xd6\xb4"
+ "\x24\x1f\x57\xb6\x80\x9a\x65\x50"
+ "\xa0\xee\x2f\x8b\x4c\x80\x86\xfb"
+ "\xbb\xda\xa0\xa2\x4b\x49\x6c\x72"
+ "\x69\x83\xe9\xaa\x92\x56\x33\x95"
+ "\xbc\x80\x88\x04\xde\xd5\x74\x9f",
+ .rlen = 128,
+ },
+};
+
+static struct cipher_testvec des3_ede_cbc_dec_tv_template[] = {
+ { /* Generated from openssl */
+ .key = "\xE9\xC0\xFF\x2E\x76\x0B\x64\x24"
+ "\x44\x4D\x99\x5A\x12\xD6\x40\xC0"
+ "\xEA\xC2\x84\xE8\x14\x95\xDB\xE8",
+ .klen = 24,
+ .iv = "\x7D\x33\x88\x93\x0F\x93\xB2\x42",
+ .input = "\x15\x8d\x5d\x34\x1b\x3f\xda\xda"
+ "\x4f\xce\x21\x82\x12\x54\x21\x0d"
+ "\xb2\x36\xda\xcc\xff\xb2\xff\x79"
+ "\x30\xe9\x95\xf4\x52\xf6\xf1\x43"
+ "\xf2\x88\xe1\x1c\x42\xa1\x6a\x11"
+ "\xda\x8f\xbd\x94\x5e\xe5\xa8\x43"
+ "\xe4\x4f\xbd\x0d\x1e\x67\xa1\x89"
+ "\x9a\x4e\x66\x62\x50\xb3\x07\x3e"
+ "\xc8\xc1\x87\x3d\x96\x62\xf7\xe7"
+ "\x96\x15\xa8\x34\xb6\x94\x1a\x17"
+ "\x05\xde\x62\xd6\xd8\x73\xd6\xb4"
+ "\x24\x1f\x57\xb6\x80\x9a\x65\x50"
+ "\xa0\xee\x2f\x8b\x4c\x80\x86\xfb"
+ "\xbb\xda\xa0\xa2\x4b\x49\x6c\x72"
+ "\x69\x83\xe9\xaa\x92\x56\x33\x95"
+ "\xbc\x80\x88\x04\xde\xd5\x74\x9f",
+ .ilen = 128,
+ .result = "\x6f\x54\x20\x6f\x61\x4d\x79\x6e"
+ "\x53\x20\x63\x65\x65\x72\x73\x74"
+ "\x54\x20\x6f\x6f\x4d\x20\x6e\x61"
+ "\x20\x79\x65\x53\x72\x63\x74\x65"
+ "\x20\x73\x6f\x54\x20\x6f\x61\x4d"
+ "\x79\x6e\x53\x20\x63\x65\x65\x72"
+ "\x73\x74\x54\x20\x6f\x6f\x4d\x20"
+ "\x6e\x61\x20\x79\x65\x53\x72\x63"
+ "\x74\x65\x20\x73\x6f\x54\x20\x6f"
+ "\x61\x4d\x79\x6e\x53\x20\x63\x65"
+ "\x65\x72\x73\x74\x54\x20\x6f\x6f"
+ "\x4d\x20\x6e\x61\x20\x79\x65\x53"
+ "\x72\x63\x74\x65\x20\x73\x6f\x54"
+ "\x20\x6f\x61\x4d\x79\x6e\x53\x20"
+ "\x63\x65\x65\x72\x73\x74\x54\x20"
+ "\x6f\x6f\x4d\x20\x6e\x61\x0a\x79",
+ .rlen = 128,
+ },
+};
+
/*
* Blowfish test vectors.
*/
next prev parent reply other threads:[~2008-05-24 0:35 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-23 20:18 [PATCH] tcrypt: add self test for des3_ebe cipher operating in cbc mode Neil Horman
2008-05-24 0:06 ` Herbert Xu
2008-05-24 0:34 ` Neil Horman [this message]
2008-05-24 0:36 ` Herbert Xu
2008-05-30 17:26 ` Adrian-Ken Rüegsegger
2008-05-30 22:46 ` Herbert Xu
2008-05-31 16:37 ` Neil Horman
2008-06-01 1:44 ` Adrian-Ken Rueegsegger
2008-06-01 15:54 ` Neil Horman
2008-06-01 16:19 ` Adrian-Ken Rueegsegger
2008-06-02 21:55 ` Adrian-Ken Rueegsegger
2008-06-01 1:10 ` Adrian-Ken Rueegsegger
2008-06-01 16:03 ` Neil Horman
2008-06-01 16:09 ` Adrian-Ken Rueegsegger
2008-06-01 22:18 ` Neil Horman
2008-06-01 22:43 ` Adrian-Ken Rueegsegger
2008-06-02 0:17 ` Neil Horman
2008-06-02 8:32 ` Herbert Xu
2008-06-02 12:45 ` Neil Horman
2008-06-02 12:48 ` Herbert Xu
2008-06-02 16:17 ` Neil Horman
2008-06-02 20:19 ` Adrian-Ken Rueegsegger
2008-06-02 20:45 ` Neil Horman
2008-06-03 10:00 ` Herbert Xu
-- strict thread matches above, loose matches on Subject: below --
2008-05-21 20:09 Neil Horman
2008-05-22 0:03 ` Herbert Xu
2008-05-22 11:38 ` Neil Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080524003458.GB10168@localhost.localdomain \
--to=nhorman@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.