From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from buildserver.ru.mvista.com (unknown [85.21.88.6]) by ozlabs.org (Postfix) with ESMTP id 8FD4ADE017 for ; Mon, 26 May 2008 22:06:33 +1000 (EST) Date: Mon, 26 May 2008 16:06:32 +0400 From: Anton Vorontsov To: Timur Tabi Subject: Re: [PATCH 5/7] [POWERPC] 83xx: new board support: MPC8360E-RDK Message-ID: <20080526120632.GC26288@polina.dev.rtsoft.ru> References: <20080523163811.GA12181@polina.dev.rtsoft.ru> <20080523163901.GE16137@polina.dev.rtsoft.ru> <48379A6B.4080300@freescale.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 In-Reply-To: <48379A6B.4080300@freescale.com> Cc: linuxppc-dev@ozlabs.org Reply-To: avorontsov@ru.mvista.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Fri, May 23, 2008 at 11:32:43PM -0500, Timur Tabi wrote: > Anton Vorontsov wrote: > >> 3. QE Serial UCCs (tested to not work with ucc_uart driver, reason >> unknown, yet); > > How far did you get on debugging this? Right up to an oscilloscope. :-) With latest QE ram update I can see that ucc_uart is able to transmit the data, but receiver is unable get anything (RDK has two ucc_uarts with rs485 transceivers, I looped them back). Anyway, I would probably spent more time on it if I didn't have to always rebase&resend this over and over again without any substantial changes. :-) -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2