Re: hdsp rpm support

[Florian Faber <faber@faberman.de>]

Martin,

> > The driver itself won't help you since the old user space tools
> > don't know the io box. You wouldn't be able to upload the firmware,
> > adjust the mixer levels etc. (unless you patch the old user space
> > tools, of course).
> I'm sorry, I'm a bit confused here.  You said above that "You have
> IO, you can adjust the input levels, switch standby and disconnect
> the box. So everything works as you would expect it." 

With the hdsp*-tools that are currently part of the alsa-tools suite, 
you cannot control the RPM. Neither can you control a lot of the other 
RME cards. That's going to change with a whole new set of userspace 
tools.

So, if you are curious, I can give you the new driver and a small 
command line program that enables the RPM io box (which is on bypass 
mode by default). Or you wait until I finished the new user space 
tools..


Flo
-- 
Machines can do the work, so people have time to think.
public key 6C002249          x-hkp://wwwkeys.eu.pgp.net