From: Jan Nikitenko <jan.nikitenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: David Brownell
<dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Cc: spi-devel-general-TtF/mJH4Jtrk1uMJSBkQmQ@public.gmane.org,
Manuel Lauss
<mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
Subject: [PATCH] au1550-spi: proper platform driver
Date: Tue, 10 Jun 2008 11:46:02 +0200 [thread overview]
Message-ID: <20080610114602.6fb327df@nikitenko> (raw)
From: Manuel Lauss <mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
Date: Sat, 7 Jun 2008 12:14:37 +0200
Subject: [PATCH] au1550_spi: proper platform device
Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA
resources from platform resource information like any well-behaved
platform driver.
Signed-off-by: Manuel Lauss <mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
[jan.nikitenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org: fixed request_mem_region() call arg,
removed ioremap of memio (kseg1) resources,
added check for usedma module parameter not to create dbdma
device when dma is disabled, tested]
Signed-off-by: Jan Nikitenko <jan.nikitenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/spi/au1550_spi.c | 120 ++++++++++++++----------------
include/asm-mips/mach-au1x00/au1550_spi.h | 1
2 files changed, 59 insertions(+), 62 deletions(-)
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 072c4a5..f44a76f 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -26,6 +26,7 @@
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/resource.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/dma-mapping.h>
@@ -96,6 +97,8 @@ static dbdev_tab_t au1550_spi_mem_dbdev =
.dev_intpolarity = 0
};
+static int ddma_memid; /* id to above mem dma device */
+
static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
@@ -732,6 +735,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
{
struct au1550_spi *hw;
struct spi_master *master;
+ struct resource *r;
int err = 0;
master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
@@ -753,76 +757,58 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
goto err_no_pdata;
}
- platform_set_drvdata(pdev, hw);
-
- init_completion(&hw->master_done);
-
- hw->bitbang.master = hw->master;
- hw->bitbang.setup_transfer = au1550_spi_setupxfer;
- hw->bitbang.chipselect = au1550_spi_chipsel;
- hw->bitbang.master->setup = au1550_spi_setup;
- hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
+ r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no IRQ\n");
+ err = -ENODEV;
+ goto err_no_iores;
+ }
+ hw->irq = r->start;
+
+ hw->usedma = 0;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r) {
+ hw->dma_tx_id = r->start;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r) {
+ hw->dma_rx_id = r->start;
+ if (usedma && ddma_memid) {
+ if (pdev->dev.dma_mask == NULL)
+ dev_warn(&pdev->dev, "no dma mask\n");
+ else
+ hw->usedma = 1;
+ }
+ }
+ }
- switch (hw->pdata->bus_num) {
- case 0:
- hw->irq = AU1550_PSC0_INT;
- hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC0_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC0_TX;
- break;
- case 1:
- hw->irq = AU1550_PSC1_INT;
- hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC1_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC1_TX;
- break;
- case 2:
- hw->irq = AU1550_PSC2_INT;
- hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC2_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC2_TX;
- break;
- case 3:
- hw->irq = AU1550_PSC3_INT;
- hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR;
- hw->dma_rx_id = DSCR_CMD0_PSC3_RX;
- hw->dma_tx_id = DSCR_CMD0_PSC3_TX;
- break;
- default:
- dev_err(&pdev->dev, "Wrong bus_num of SPI\n");
- err = -ENOENT;
- goto err_no_pdata;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no mmio resource\n");
+ err = -ENODEV;
+ goto err_no_iores;
}
- if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t),
+ if (request_mem_region(r->start, sizeof(psc_spi_t),
pdev->name) == NULL) {
dev_err(&pdev->dev, "Cannot reserve iomem region\n");
err = -ENXIO;
goto err_no_iores;
}
+ hw->regs = (psc_spi_t __iomem *)r->start;
+
+ platform_set_drvdata(pdev, hw);
- if (usedma) {
- if (pdev->dev.dma_mask == NULL)
- dev_warn(&pdev->dev, "no dma mask\n");
- else
- hw->usedma = 1;
- }
+ init_completion(&hw->master_done);
- if (hw->usedma) {
- /*
- * create memory device with 8 bits dev_devwidth
- * needed for proper byte ordering to spi fifo
- */
- int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
- if (!memid) {
- dev_err(&pdev->dev,
- "Cannot create dma 8 bit mem device\n");
- err = -ENXIO;
- goto err_dma_add_dev;
- }
+ hw->bitbang.master = hw->master;
+ hw->bitbang.setup_transfer = au1550_spi_setupxfer;
+ hw->bitbang.chipselect = au1550_spi_chipsel;
+ hw->bitbang.master->setup = au1550_spi_setup;
+ hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
- hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid,
+ if (hw->usedma) {
+ hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
hw->dma_tx_id, NULL, (void *)hw);
if (hw->dma_tx_ch == 0) {
dev_err(&pdev->dev,
@@ -841,7 +827,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
- memid, NULL, (void *)hw);
+ ddma_memid, NULL, (void *)hw);
if (hw->dma_rx_ch == 0) {
dev_err(&pdev->dev,
"Cannot allocate rx dma channel\n");
@@ -874,7 +860,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
goto err_no_irq;
}
- master->bus_num = hw->pdata->bus_num;
+ master->bus_num = pdev->id;
master->num_chipselect = hw->pdata->num_chipselect;
/*
@@ -924,7 +910,7 @@ err_no_txdma_descr:
au1xxx_dbdma_chan_free(hw->dma_tx_ch);
err_no_txdma:
-err_dma_add_dev:
+err_ioremap:
release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
err_no_iores:
@@ -971,12 +957,24 @@ static struct platform_driver au1550_spi_drv = {
static int __init au1550_spi_init(void)
{
+ /*
+ * create memory device with 8 bits dev_devwidth
+ * needed for proper byte ordering to spi fifo
+ */
+ if (usedma) {
+ ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
+ if (!ddma_memid)
+ printk(KERN_ERR "au1550-spi: cannot add memory"
+ " dbdma device\n");
+ }
return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe);
}
module_init(au1550_spi_init);
static void __exit au1550_spi_exit(void)
{
+ if (ddma_memid)
+ au1xxx_ddma_del_device(ddma_memid);
platform_driver_unregister(&au1550_spi_drv);
}
module_exit(au1550_spi_exit);
diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h
index 40e6c48..08e1958 100644
--- a/include/asm-mips/mach-au1x00/au1550_spi.h
+++ b/include/asm-mips/mach-au1x00/au1550_spi.h
@@ -6,7 +6,6 @@
#define _AU1550_SPI_H_
struct au1550_spi_info {
- s16 bus_num; /* defines which PSC and IRQ to use */
u32 mainclk_hz; /* main input clock frequency of PSC */
u16 num_chipselect; /* number of chipselects supported */
void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
next reply other threads:[~2008-06-10 9:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-10 9:46 Jan Nikitenko [this message]
2008-06-10 10:00 ` [PATCH] au1550-spi: proper platform driver Manuel Lauss
[not found] ` <20080610100004.GA4637-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
2008-06-10 11:12 ` Jan Nikitenko
[not found] ` <484E61A4.9080707-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-06-10 11:27 ` Manuel Lauss
[not found] ` <20080610112702.GB4637-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
2008-06-10 12:19 ` Jan Nikitenko
-- strict thread matches above, loose matches on Subject: below --
2008-06-10 13:24 Manuel Lauss
[not found] ` <20080610132440.GA6580-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org>
2008-06-10 13:35 ` Jan Nikitenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080610114602.6fb327df@nikitenko \
--to=jan.nikitenko-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=mano-nEyxjcs6f3Vin2gBucwGBecsttgLyre6@public.gmane.org \
--cc=spi-devel-general-TtF/mJH4Jtrk1uMJSBkQmQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.