From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: benh@kernel.crashing.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>, linux-next@vger.kernel.org
Subject: Re: linux-next: ide build failure
Date: Mon, 16 Jun 2008 11:54:42 +0200 [thread overview]
Message-ID: <200806161154.43011.bzolnier@gmail.com> (raw)
In-Reply-To: <1213588543.8129.122.camel@pasglop>
Hi,
On Monday 16 June 2008, Benjamin Herrenschmidt wrote:
> On Mon, 2008-06-16 at 13:38 +1000, Stephen Rothwell wrote:
> > Hi Bart,
> >
> > Today's linux-next build (powerpc ppc64_defconfig) failed like this:
> >
> > drivers/ide/ppc/pmac.c: In function 'pmac_ide_cable_detect':
> > drivers/ide/ppc/pmac.c:926: error: implicit declaration of function 'drv_get_drvdata'
> > drivers/ide/ppc/pmac.c:926: warning: cast to pointer from integer of different size
> > drivers/ide/ppc/pmac.c: In function 'pmac_ide_init_dev':
> > drivers/ide/ppc/pmac.c:950: warning: cast to pointer from integer of different size
> > drivers/ide/ppc/pmac.c: In function 'pmac_ide_setup_device':
> > drivers/ide/ppc/pmac.c:1082: error: request for member 'irq' in something not a structure or union
> > drivers/ide/ppc/pmac.c: In function 'pmac_ide_pci_suspend':
> > drivers/ide/ppc/pmac.c:1321: error: 'hwif' undeclared (first use in this function)
> > drivers/ide/ppc/pmac.c:1321: error: (Each undeclared identifier is reported only once
> > drivers/ide/ppc/pmac.c:1321: error: for each function it appears in.)
> > drivers/ide/ppc/pmac.c:1316: warning: unused variable 'pmif'
> > drivers/ide/ppc/pmac.c: In function 'pmac_ide_pci_resume':
> > drivers/ide/ppc/pmac.c:1336: error: 'hwif' undeclared (first use in this function)
> > drivers/ide/ppc/pmac.c:1332: warning: unused variable 'pmif'
> >
> > I applied the patch below ... (which clearly needs work)
>
> Bart, I hadn't managed to review / test your new patches yet, but
> please, avoid putting anything touching the pmac stuff in your
> "next" tree until it's been fully acked by me. Stuff in linux-next
I must admit that I rushed things this time and I'm sorry for that.
[ However it may be connected with the fact that recently I've been
waiting for _weeks_ for your feedback (sometimes to not get _any_). ]
> is stuff that is supposed to be -ready to be merged- upstream. Those
> patches definitely are not.
1 of 7 patches posted (3 were bugfixes, including regression bugfix)
had an obvious build problems and I indeed should have audited it
properly (the patch is still conceptually good and I need it in for
patches that will be posted for review / testing this week) so this
is an uncalled generalization.
[ I could be of course wrong and there may be real problems with other
patches as well so please do review / test. Thanks! ]
PS Stephen, thanks for fixing the build problems.
Bart
> Thanks !
>
> Ben.
>
> > --
> > Cheers,
> > Stephen Rothwell sfr@canb.auug.org.au
> > http://www.canb.auug.org.au/~sfr/
> >
> > >From e23339391c5e18a12f2c5d51ca5032df92d9d978 Mon Sep 17 00:00:00 2001
> > From: Stephen Rothwell <sfr@canb.auug.org.au>
> > Date: Mon, 16 Jun 2008 13:35:36 +1000
> > Subject: [PATCH] ide pmac fixes 1
> >
> > Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> > ---
> > drivers/ide/ppc/pmac.c | 16 ++++++++--------
> > 1 files changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
> > index 0671fb8..363bc4e 100644
> > --- a/drivers/ide/ppc/pmac.c
> > +++ b/drivers/ide/ppc/pmac.c
> > @@ -923,7 +923,7 @@ static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
> > static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
> > {
> > pmac_ide_hwif_t *pmif =
> > - (pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
> > + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
> > struct device_node *np = pmif->node;
> > const char *cable = of_get_property(np, "cable-type", NULL);
> >
> > @@ -947,7 +947,7 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
> > {
> > ide_hwif_t *hwif = drive->hwif;
> > pmac_ide_hwif_t *pmif =
> > - (pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
> > + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
> >
> > if (pmif->mediabay) {
> > #ifdef CONFIG_PMAC_MEDIABAY
> > @@ -1076,10 +1076,10 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
> > msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
> > }
> >
> > - printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
> > - "bus ID %d%s, irq %d\n", model_name[pmif->kind],
> > - pmif->mdev ? "MacIO" : "PCI", pmif->aapl_bus_id,
> > - pmif->mediabay ? " (mediabay)" : "", hw.irq);
> > +// printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
> > +// "bus ID %d%s, irq %d\n", model_name[pmif->kind],
> > +// pmif->mdev ? "MacIO" : "PCI", pmif->aapl_bus_id,
> > +// pmif->mediabay ? " (mediabay)" : "", hw.irq);
> >
> > hwif = ide_find_port_slot(&d);
> > if (hwif == NULL)
> > @@ -1318,7 +1318,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
> >
> > if (mesg.event != pdev->dev.power.power_state.event
> > && (mesg.event & PM_EVENT_SLEEP)) {
> > - rc = pmac_ide_do_suspend(hwif);
> > + rc = pmac_ide_do_suspend(pmif);
> > if (rc == 0)
> > pdev->dev.power.power_state = mesg;
> > }
> > @@ -1333,7 +1333,7 @@ pmac_ide_pci_resume(struct pci_dev *pdev)
> > int rc = 0;
> >
> > if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
> > - rc = pmac_ide_do_resume(hwif);
> > + rc = pmac_ide_do_resume(pmif);
> > if (rc == 0)
> > pdev->dev.power.power_state = PMSG_ON;
> > }
next prev parent reply other threads:[~2008-06-16 9:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-16 3:38 linux-next: ide build failure Stephen Rothwell
2008-06-16 3:55 ` Benjamin Herrenschmidt
2008-06-16 9:54 ` Bartlomiej Zolnierkiewicz [this message]
2008-06-16 19:24 ` Bartlomiej Zolnierkiewicz
2008-06-16 22:40 ` Benjamin Herrenschmidt
2008-06-17 9:53 ` Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2008-05-30 1:54 Stephen Rothwell
2008-05-31 13:38 ` Bartlomiej Zolnierkiewicz
2008-06-01 2:05 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200806161154.43011.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-next@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.