[PATCH] OMAP3:devices.c: Enabling 4-bit for SD card

[Purushotam Kumar <a0876542@india.ti.com>]

OMAP3:devices.c:Enabling 4-bit for SD card

SD card was working in 1-bit mode.This patch will configure SD card in 
4-bit mode and hence performance  will increase.

Signed-off-by: Purushotam Kumar <purushotam@ti.com>
Acked-by: Madhusudhan Chikkature Rajashekar <madhu.cr@ti.com>
---
 arch/arm/plat-omap/devices.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Index: linux-omap-2.6/arch/arm/plat-omap/devices.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/plat-omap/devices.c
+++ linux-omap-2.6/arch/arm/plat-omap/devices.c
@@ -292,8 +292,10 @@ static void __init omap_init_mmc(void)
 	mmc = &mmc_conf->mmc[0];
 
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
-		if (mmc->enabled)
+		if (mmc->enabled) {
+			mmc1_data.conf = *mmc;
 			(void) platform_device_register(&mmc_omap_device1);
+		}
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
 		mmc = &mmc_conf->mmc[1];