From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kim Phillips <kim.phillips@freescale.com>
Date: Wed, 25 Jun 2008 17:14:31 -0500
Subject: [U-Boot-Users] [PATCH] fix non-working mvBL-M7
In-Reply-To: <485F882E.7070100@matrix-vision.de>
References: <485F79BD.1030206@matrix-vision.de>
	<485F882E.7070100@matrix-vision.de>
Message-ID: <20080625171431.09ba6c78.kim.phillips@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, 23 Jun 2008 13:25:34 +0200
Andre Schwarz <andre.schwarz@matrix-vision.de> wrote:

Hello Andre,

> diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
> index 349ca14..8c0e8b6 100644
> --- a/include/configs/MVBLM7.h
> +++ b/include/configs/MVBLM7.h
> @@ -27,7 +27,7 @@
>  #ifndef __CONFIG_H
>  #define __CONFIG_H
>  
> -#define MV_VERSION  "v1.0.1"
> +#define MV_VERSION  "v1.0.2"

instead of incrementing this for each patch, can we just use
U_BOOT_VERSION instead?

>  #define CONFIG_HAS_ETH0
> +#define CONFIG_ETHADDR          b6:b4:45:eb:fb:c0
>  #define CONFIG_TSEC1_NAME	"TSEC0"
>  #define CONFIG_FEC1_PHY_NORXERR
>  #define CFG_TSEC1_OFFSET	0x24000
> @@ -224,6 +225,7 @@
>  #define TSEC1_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)
>  
>  #define CONFIG_HAS_ETH1
> +#define CONFIG_ETH1ADDR         b6:b4:45:eb:fb:c2
>  #define CONFIG_TSEC2_NAME  	"TSEC1"

I had removed this from your original board port because this goes
against recommended practice; see:

http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/41178

> +#define CONFIG_HIGH_BATS       1

this line applied.

Kim