[PATCH 08/18 v2] powerpc: Do not probe PCI buses or eBus devices if CMO is enabled

[Robert Jennings <rcj@linux.vnet.ibm.com>]

=46rom: Brian King <brking@linux.vnet.ibm.com>

The Cooperative Memory Overcommit (CMO) on System p does not currently
support native PCI devices or eBus devices when enabled. Prevent
PCI bus probe and eBus device probe if the feature is enabled.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>

---

 arch/powerpc/kernel/ibmebus.c          |    6 ++++++
 arch/powerpc/platforms/pseries/setup.c |    4 ++++
 2 files changed, 10 insertions(+)

Index: b/arch/powerpc/kernel/ibmebus.c
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -45,6 +45,7 @@
 #include <linux/of_platform.h>
 #include <asm/ibmebus.h>
 #include <asm/abs_addr.h>
+#include <asm/firmware.h>
=20
 static struct device ibmebus_bus_device =3D { /* fake "parent" device */
 	.bus_id =3D "ibmebus",
@@ -332,6 +333,11 @@ static int __init ibmebus_bus_init(void)
 {
 	int err;
=20
+	if (firmware_has_feature(FW_FEATURE_CMO)) {
+		printk(KERN_WARNING "Not probing eBus since CMO is enabled\n");
+		return 0;
+	}
+
 	printk(KERN_INFO "IBM eBus Device Driver\n");
=20
 	err =3D of_bus_type_init(&ibmebus_bus_type, "ibmebus");
Index: b/arch/powerpc/platforms/pseries/setup.c
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -539,6 +539,10 @@ static void pseries_shared_idle_sleep(vo
=20
 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 {
+	if (firmware_has_feature(FW_FEATURE_CMO)) {
+		dev_warn(&bus->dev, "Not probing PCI bus since CMO is enabled\n");
+		return PCI_PROBE_NONE;
+	}
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		return PCI_PROBE_DEVTREE;
 	return PCI_PROBE_NORMAL;