All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Brownell <david-b@pacbell.net>
To: Stefan Becker <Stefan.Becker@nokia.com>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	Alan Stern <stern@rowland.harvard.edu>,
	Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: PATCH: 2.6.26-rc8: Fix IRQF_DISABLED for shared interrupts
Date: Mon, 30 Jun 2008 12:57:48 -0700	[thread overview]
Message-ID: <200806301257.49220.david-b@pacbell.net> (raw)
In-Reply-To: <200806300415.15796.david-b@pacbell.net>

On Monday 30 June 2008, David Brownell wrote:
> 
> On Monday 30 June 2008, Stefan Becker wrote:
> > It seems IRQF_SHARED | IRQF_DISABLED has already been discussed several 
> > times on LKML:
> 
> Given that, I'm surprised that nobody has added a warning that
> prints when those two flags are both passed to request_irq().

Well, here's a fix for that little problem.

Notice the rude interaction with LOCKDEP too.  If you used that,
you'd never have seen the behavior you saw.  And if you did use
that, with non-IRQF_DISABLED interrupt handlers, you'd wrongly
believe some IRQ code paths always ran with IRQs disabled...

- Dave


===== CUT HERE
We periodically have problems that get tracked down to the IRQ
framework not respecting IRQF_DISABLED for some shared IRQ cases.
Linus views this as "will not fix", but we're still left with
the bugs caused by this misbehavior.

This patch adds a nag message in request_irq(), so that drivers
can fix their IRQ handlers to avoid this problem.

Note that developers will never see the relevant bugs when they
run with LOCKDEP, so it's no wonder these bugs are hard to find.
(That also means LOCKDEP will be missing some IRQ-related bugs
involving IRQ handlers that don't set IRQF_DISABLED.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 kernel/irq/manage.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/kernel/irq/manage.c	2008-06-30 12:28:58.000000000 -0700
+++ b/kernel/irq/manage.c	2008-06-30 12:46:54.000000000 -0700
@@ -539,6 +539,18 @@ int request_irq(unsigned int irq, irq_ha
 	struct irqaction *action;
 	int retval;
 
+	/*
+	 * handle_IRQ_event() always ignores IRQF_DISABLED except for
+	 * the _first_ irqaction (sigh).  That can cause oopsing, but
+	 * the behavior is classified as "will not fix" so we need to
+	 * start nudging drivers away from using that idiom.
+	 */
+	if ((irqflags & (IRQF_SHARED|IRQF_DISABLED))
+			== (IRQF_SHARED|IRQF_DISABLED))
+		pr_warning("IRQ %d/%s: IRQF_DISABLED is not "
+				"guaranteed on shared IRQs\n",
+				irq, devname);
+
 #ifdef CONFIG_LOCKDEP
 	/*
 	 * Lockdep wants atomic interrupt handlers:


      parent reply	other threads:[~2008-06-30 19:58 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-22 16:55 [REGRESSION] 2.6.24/25: random lockups when accessing external USB harddrive Stefan Becker
2008-06-22 17:42 ` Rene Herman
2008-06-22 19:31   ` Alan Stern
2008-06-23 15:52     ` Stefan Becker
2008-06-23 18:10       ` Alan Stern
2008-06-24 18:41         ` Stefan Becker
2008-06-24 21:15           ` Alan Stern
2008-06-25 15:52             ` Stefan Becker
2008-06-25 18:38               ` Alan Stern
2008-06-26  6:31                 ` Stefan Becker
2008-06-26 14:25                   ` Alan Stern
2008-06-26 22:07                     ` Stefan Becker
2008-06-27 16:07                       ` David Brownell
2008-06-28 14:31                         ` Stefan Becker
2008-06-27 16:10                       ` Alan Stern
2008-06-28 14:36                         ` Stefan Becker
2008-06-28 15:39                         ` Stefan Becker
2008-06-28 16:53                           ` Alan Stern
2008-06-28 19:34                             ` BUG in 2.6.26-rc8 interrupt handling Becker Stefan (Nokia-D/Salo)
2008-06-28 19:51                               ` David Brownell
2008-06-29 14:57                                 ` PATCH: 2.6.26-rc8: Fix IRQF_DISABLED for shared interrupts Stefan Becker
2008-06-30  3:09                                   ` David Brownell
2008-06-30  5:22                                     ` Stefan Becker
2008-06-30 14:28                                       ` Henrique de Moraes Holschuh
2008-06-30 14:26                                         ` Alan Cox
2008-06-30  9:34                                     ` Stefan Becker
2008-06-30 11:15                                       ` David Brownell
2008-06-30 14:37                                         ` Alan Stern
2008-06-30 18:53                                           ` [PATCH] USB: fix interrupt disabling for HCDs with shared interrupt handlers Stefan Becker
2008-06-30 19:35                                             ` Alan Stern
2008-06-30 20:31                                               ` David Brownell
2008-06-30 21:26                                                 ` Stefan Becker
2008-07-01 14:11                                                   ` Alan Stern
2008-07-01 14:19                                                     ` Leonardo Chiquitto
2008-07-01 16:19                                                     ` Stefan Becker
2008-07-01 18:25                                                       ` Greg KH
2008-07-01 18:59                                                         ` Alan Stern
2008-07-01 19:13                                                           ` Greg KH
2008-07-01 19:21                                                           ` David Brownell
2008-07-01 19:15                                                         ` Stefan Becker
2008-07-01 19:51                                                           ` Greg KH
2008-07-01 16:22                                                     ` David Brownell
2008-06-30 21:29                                                 ` Alan Stern
2008-06-30 21:48                                                   ` David Brownell
2008-06-30 19:57                                         ` David Brownell [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200806301257.49220.david-b@pacbell.net \
    --to=david-b@pacbell.net \
    --cc=Stefan.Becker@nokia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.