All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Arun KS <getarunks@gmail.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx
Date: Thu, 3 Jul 2008 13:14:56 +0300	[thread overview]
Message-ID: <20080703101452.GF14276@atomide.com> (raw)
In-Reply-To: <dfeb90390806260817o3d2dd180qbe97c77be44de94@mail.gmail.com>

* Arun KS <getarunks@gmail.com> [080626 18:17]:
> On Thu, Jun 26, 2008 at 5:52 PM, Tony Lindgren <tony@atomide.com> wrote:
> > Hi,
> >
> > * Arun KS <getarunks@gmail.com> [080624 15:14]:
> >> net:smc911x Modify driver to also work with omap24xx
> >
> > Few comments below.
> >
> > Also, can you please send this to the Linux netdev mailing list?
> > Also Cc linux-omap list too.
> >
> >> Signed-off-by: Arun KS <arunks@mistralsolutions.com>
> >> ---
> >>  drivers/net/Kconfig   |    2 +-
> >>  drivers/net/smc911x.h |    5 +++++
> >>  2 files changed, 6 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> >> index 61ecee7..17d0a9c 100644
> >> --- a/drivers/net/Kconfig
> >> +++ b/drivers/net/Kconfig
> >> @@ -955,7 +955,7 @@ config SMC911X
> >>     tristate "SMSC LAN911[5678] support"
> >>     select CRC32
> >>     select MII
> >> -   depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX
> >> +   depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX || ARCH_OMAP24XX
> >>     help
> >>       This is a driver for SMSC's LAN911x series of Ethernet chipsets
> >>       including the new LAN9115, LAN9116, LAN9117, and LAN9118.
> >
> > Maybe have ARCH_OMAP24XX before ARCH_OMAP34XX to be consistent
> > how it's done elsewhere.
> >
> >
> >> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> >> index dad93a8..0f406a0 100644
> >> --- a/drivers/net/smc911x.h
> >> +++ b/drivers/net/smc911x.h
> >> @@ -47,6 +47,11 @@
> >>    #define SMC_USE_32BIT        1
> >>    #define SMC_IRQ_SENSE        IRQF_TRIGGER_LOW
> >>    #define SMC_MEM_RESERVED 1
> >> +#elif defined(CONFIG_ARCH_OMAP24XX)
> >> +  #define SMC_USE_16BIT        0
> >> +  #define SMC_USE_32BIT        1
> >> +  #define SMC_IRQ_SENSE        IRQF_TRIGGER_LOW
> >> +  #define SMC_MEM_RESERVED 1
> Here i used the tab itself, when this patch is applied it comes pretty fine in
> the code. I checked the patch with checkpatch.pl also. Can you tell me
> what is going wrong?
> 
> After code formating issues are resolved i can resend the patch again.

OK, I was just looking the patch. I trust you on the formatting issue :)

Tony

> 
> Regards,
> Arun
> >>  #endif
> >
> > You should probably use tabs here in the new code even if old code
> > does not.
> >
> > Regards,
> >
> > Tony
> >
> >>
> >>
> >> --
> >> 1.5.3.4
> >
> >> From 8b45bfd40aca7d5f89195f95d668bae78e2dbba9 Mon Sep 17 00:00:00 2001
> >> From: Arun KS <arunks@mistralsolutions.com>
> >> Date: Tue, 24 Jun 2008 17:33:08 +0530
> >> Subject: [PATCH] net:smc911x Modify driver to also work with omap24xx
> >>
> >> net:smc911x Modify driver to also work with omap24xx
> >>
> >> Signed-off-by: Arun KS <arunks@mistralsolutions.com>
> >> ---
> >>  drivers/net/Kconfig   |    2 +-
> >>  drivers/net/smc911x.h |    5 +++++
> >>  2 files changed, 6 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> >> index 61ecee7..17d0a9c 100644
> >> --- a/drivers/net/Kconfig
> >> +++ b/drivers/net/Kconfig
> >> @@ -955,7 +955,7 @@ config SMC911X
> >>       tristate "SMSC LAN911[5678] support"
> >>       select CRC32
> >>       select MII
> >> -     depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX
> >> +     depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || ARCH_OMAP34XX || ARCH_OMAP24XX
> >>       help
> >>         This is a driver for SMSC's LAN911x series of Ethernet chipsets
> >>         including the new LAN9115, LAN9116, LAN9117, and LAN9118.
> >> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> >> index dad93a8..0f406a0 100644
> >> --- a/drivers/net/smc911x.h
> >> +++ b/drivers/net/smc911x.h
> >> @@ -47,6 +47,11 @@
> >>    #define SMC_USE_32BIT              1
> >>    #define SMC_IRQ_SENSE              IRQF_TRIGGER_LOW
> >>    #define SMC_MEM_RESERVED   1
> >> +#elif defined(CONFIG_ARCH_OMAP24XX)
> >> +  #define SMC_USE_16BIT              0
> >> +  #define SMC_USE_32BIT              1
> >> +  #define SMC_IRQ_SENSE              IRQF_TRIGGER_LOW
> >> +  #define SMC_MEM_RESERVED   1
> >>  #endif
> >>
> >>
> >> --
> >> 1.5.3.4
> >>
> >
> >

      reply	other threads:[~2008-07-03 12:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-24 12:14 [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx Arun KS
2008-06-26 12:22 ` Tony Lindgren
2008-06-26 15:17   ` Arun KS
2008-07-03 10:14     ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080703101452.GF14276@atomide.com \
    --to=tony@atomide.com \
    --cc=getarunks@gmail.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.