From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Subject: [PATCH/RFT 2/2] mac80211: push interface checks down
Date: Sat, 05 Jul 2008 12:06:57 +0200 [thread overview]
Message-ID: <20080705100826.860226000@sipsolutions.net> (raw)
In-Reply-To: 20080705100655.419906000@sipsolutions.net
This patch pushes the "netif_running()" and "same type as before"
checks down into ieee80211_if_change_type() to centralise the
logic instead of duplicating it for cfg80211 and wext.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/cfg.c | 8 ++++----
net/mac80211/ieee80211_i.h | 4 ++--
net/mac80211/iface.c | 20 ++++++++++++++++++--
net/mac80211/wext.c | 9 +--------
4 files changed, 25 insertions(+), 16 deletions(-)
--- everything.orig/net/mac80211/cfg.c 2008-07-05 11:35:09.000000000 +0200
+++ everything/net/mac80211/cfg.c 2008-07-05 12:04:14.000000000 +0200
@@ -84,22 +84,22 @@ static int ieee80211_change_iface(struct
struct net_device *dev;
enum ieee80211_if_types itype;
struct ieee80211_sub_if_data *sdata;
+ int ret;
/* we're under RTNL */
dev = __dev_get_by_index(&init_net, ifindex);
if (!dev)
return -ENODEV;
- if (netif_running(dev))
- return -EBUSY;
-
itype = nl80211_type_to_mac80211_type(type);
if (itype == IEEE80211_IF_TYPE_INVALID)
return -EINVAL;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- ieee80211_if_change_type(sdata, itype);
+ ret = ieee80211_if_change_type(sdata, itype);
+ if (ret)
+ return ret;
if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
ieee80211_if_sta_set_mesh_id(&sdata->u.sta,
--- everything.orig/net/mac80211/ieee80211_i.h 2008-07-05 11:35:09.000000000 +0200
+++ everything/net/mac80211/ieee80211_i.h 2008-07-05 12:04:14.000000000 +0200
@@ -929,8 +929,8 @@ void ieee80211_if_setup(struct net_devic
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct net_device **new_dev, enum ieee80211_if_types type,
struct vif_params *params);
-void ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
- enum ieee80211_if_types type);
+int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_if_types type);
void ieee80211_if_remove(struct net_device *dev);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
--- everything.orig/net/mac80211/iface.c 2008-07-05 12:02:21.000000000 +0200
+++ everything/net/mac80211/iface.c 2008-07-05 12:04:14.000000000 +0200
@@ -138,9 +138,23 @@ static void ieee80211_setup_sdata(struct
ieee80211_debugfs_add_netdev(sdata);
}
-void ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
- enum ieee80211_if_types type)
+int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_if_types type)
{
+ ASSERT_RTNL();
+
+ if (type == sdata->vif.type)
+ return 0;
+
+ /*
+ * We could, here, on changes between IBSS/STA/MESH modes,
+ * invoke an MLME function instead that disassociates etc.
+ * and goes into the requested mode.
+ */
+
+ if (netif_running(sdata->dev))
+ return -EBUSY;
+
/* Purge and reset type-dependent state. */
ieee80211_teardown_sdata(sdata->dev);
ieee80211_setup_sdata(sdata, type);
@@ -149,6 +163,8 @@ void ieee80211_if_change_type(struct iee
sdata->basic_rates = 0;
sdata->drop_unencrypted = 0;
sdata->sequence = 0;
+
+ return 0;
}
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
--- everything.orig/net/mac80211/wext.c 2008-07-05 11:35:09.000000000 +0200
+++ everything/net/mac80211/wext.c 2008-07-05 12:04:14.000000000 +0200
@@ -296,14 +296,7 @@ static int ieee80211_ioctl_siwmode(struc
return -EINVAL;
}
- if (type == sdata->vif.type)
- return 0;
- if (netif_running(dev))
- return -EBUSY;
-
- ieee80211_if_change_type(sdata, type);
-
- return 0;
+ return ieee80211_if_change_type(sdata, type);
}
--
prev parent reply other threads:[~2008-07-05 10:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-05 10:06 [PATCH/RFT 0/2] mac80211 virtual interface improvement Johannes Berg
2008-07-05 10:06 ` [PATCH/RFT 1/2] mac80211: revamp virtual interface handling Johannes Berg
2008-07-05 10:06 ` Johannes Berg [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080705100826.860226000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.