All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ondrej Zary <linux@rainbow-software.org>
To: Alan Cox <alan@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-ide@vger.kernel.org
Subject: Re: pata_it821x completely broken
Date: Mon, 7 Jul 2008 20:07:38 +0200	[thread overview]
Message-ID: <200807072007.40818.linux@rainbow-software.org> (raw)
In-Reply-To: <20080706230118.GA25905@devserv.devel.redhat.com>

On Monday 07 July 2008 01:01:18 Alan Cox wrote:
> On Sun, Jul 06, 2008 at 11:50:33PM +0200, Ondrej Zary wrote:
> > Thanks, it does not complain about HPA anymore. However, there are some
> > error messages left. I thought that they were connected with the HPA, but
> > obviously they aren't:
>
> FLUSH_CACHE .. I would hope the firmware supports that if advertised. If so
> then adding it to the switch in it821x_smart_qc_issue might do the trick
> (ATA_CMD_FLUSH and ATA_CMD_FLUSH_EXT). I'd be interested to know if your
> firmware seems to support that or whether the entire thing goes castors up
> if it gets through.

It breaks - I get more errors and it takes ages to reboot. Looks like the 
firmware does not like that command. I don't believe that it's so stupid - is 
it even possible to safely turn off the machine when neither FLUSH nor STOP 
command can be issued?

sd 2:0:0:0: [sdb] Synchronizing SCSI cache
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: limiting speed to UDMA/133:PIO6
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: limiting speed to UDMA/33:PIO6
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: limiting speed to PIO6
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
sd 2:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
Restarting system.
machine restart



>
> Alan



-- 
Ondrej Zary

  reply	other threads:[~2008-07-07 18:07 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-04 19:53 pata_it821x completely broken Ondrej Zary
2008-07-04 20:22 ` Alan Cox
2008-07-04 21:39   ` Ondrej Zary
2008-07-04 21:46     ` Alan Cox
2008-07-05 10:41       ` Ondrej Zary
2008-07-05 15:49         ` Alan Cox
2008-07-06 21:03           ` Ondrej Zary
2008-07-06 20:51             ` Alan Cox
2008-07-06 21:46               ` Ondrej Zary
2008-07-06 19:37         ` Alan Cox
2008-07-06 21:50           ` Ondrej Zary
2008-07-06 23:01             ` Alan Cox
2008-07-07 18:07               ` Ondrej Zary [this message]
2008-07-10 20:35               ` Ondrej Zary
2008-07-11 18:43                 ` Ondrej Zary
2008-07-11 20:14                   ` Alan Cox
2008-07-12 21:42                     ` Ondrej Zary
2008-07-13 11:47                       ` Ondrej Zary
2008-07-13 11:35                         ` Alan Cox
2008-07-13 12:10                           ` Ondrej Zary
2008-07-13 14:08                             ` Alan Cox
2008-07-22 17:59                         ` Ondrej Zary
2008-07-22 18:10                           ` Alan Cox
2008-07-22 19:16                             ` Ondrej Zary
2008-07-22 19:35                               ` Rene Herman
2008-07-22 20:39                                 ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200807072007.40818.linux@rainbow-software.org \
    --to=linux@rainbow-software.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=alan@redhat.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.