[PATCH] rt2x00: Reset LED assoc status after firmware update

[Ivo van Doorn <ivdoorn@gmail.com>]

According to the legacy drivers the LED association status
must be reset after the firmware has been uploaded to the
hardware.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
 drivers/net/wireless/rt2x00/rt2x00firmware.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index b971bc6..bab05a5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -100,6 +100,14 @@ int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
 	retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev,
 						    rt2x00dev->fw->data,
 						    rt2x00dev->fw->size);
+
+	/*
+	 * When the firmware is uploaded to the hardware the LED
+	 * association status might have been triggered, for correct
+	 * LED handling it should now be reset.
+	 */
+	rt2x00leds_led_assoc(rt2x00dev, false);
+
 	return retval;
 }
 
-- 
1.5.6.1