From: Nick Kossifidis <mick@madwifi.org>
To: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, jirislaby@gmail.com, mcgrof@gmail.com
Subject: [PATCH 7/12] ath5k: Add RF2425 initial rfgain values
Date: Sun, 20 Jul 2008 06:42:47 +0300 [thread overview]
Message-ID: <20080720034247.GG7440@makis> (raw)
* Add initial RF gain settings for RF2425
Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
---
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index afd8689..66af70b 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1020,6 +1020,74 @@ static const struct ath5k_ini_rfgain rfgain_2413[] = {
{ AR5K_RF_GAIN(63), { 0x000000f9 } },
};
+/* Initial RF Gain settings for RF2425 */
+static const struct ath5k_ini_rfgain rfgain_2425[] = {
+ { AR5K_RF_GAIN(0), { 0x00000000 } },
+ { AR5K_RF_GAIN(1), { 0x00000040 } },
+ { AR5K_RF_GAIN(2), { 0x00000080 } },
+ { AR5K_RF_GAIN(3), { 0x00000181 } },
+ { AR5K_RF_GAIN(4), { 0x000001c1 } },
+ { AR5K_RF_GAIN(5), { 0x00000001 } },
+ { AR5K_RF_GAIN(6), { 0x00000041 } },
+ { AR5K_RF_GAIN(7), { 0x00000081 } },
+ { AR5K_RF_GAIN(8), { 0x00000188 } },
+ { AR5K_RF_GAIN(9), { 0x000001c8 } },
+ { AR5K_RF_GAIN(10), { 0x00000008 } },
+ { AR5K_RF_GAIN(11), { 0x00000048 } },
+ { AR5K_RF_GAIN(12), { 0x00000088 } },
+ { AR5K_RF_GAIN(13), { 0x00000189 } },
+ { AR5K_RF_GAIN(14), { 0x000001c9 } },
+ { AR5K_RF_GAIN(15), { 0x00000009 } },
+ { AR5K_RF_GAIN(16), { 0x00000049 } },
+ { AR5K_RF_GAIN(17), { 0x00000089 } },
+ { AR5K_RF_GAIN(18), { 0x000001b0 } },
+ { AR5K_RF_GAIN(19), { 0x000001f0 } },
+ { AR5K_RF_GAIN(20), { 0x00000030 } },
+ { AR5K_RF_GAIN(21), { 0x00000070 } },
+ { AR5K_RF_GAIN(22), { 0x00000171 } },
+ { AR5K_RF_GAIN(23), { 0x000001b1 } },
+ { AR5K_RF_GAIN(24), { 0x000001f1 } },
+ { AR5K_RF_GAIN(25), { 0x00000031 } },
+ { AR5K_RF_GAIN(26), { 0x00000071 } },
+ { AR5K_RF_GAIN(27), { 0x000001b8 } },
+ { AR5K_RF_GAIN(28), { 0x000001f8 } },
+ { AR5K_RF_GAIN(29), { 0x00000038 } },
+ { AR5K_RF_GAIN(30), { 0x00000078 } },
+ { AR5K_RF_GAIN(31), { 0x000000b8 } },
+ { AR5K_RF_GAIN(32), { 0x000001b9 } },
+ { AR5K_RF_GAIN(33), { 0x000001f9 } },
+ { AR5K_RF_GAIN(34), { 0x00000039 } },
+ { AR5K_RF_GAIN(35), { 0x00000079 } },
+ { AR5K_RF_GAIN(36), { 0x000000b9 } },
+ { AR5K_RF_GAIN(37), { 0x000000f9 } },
+ { AR5K_RF_GAIN(38), { 0x000000f9 } },
+ { AR5K_RF_GAIN(39), { 0x000000f9 } },
+ { AR5K_RF_GAIN(40), { 0x000000f9 } },
+ { AR5K_RF_GAIN(41), { 0x000000f9 } },
+ { AR5K_RF_GAIN(42), { 0x000000f9 } },
+ { AR5K_RF_GAIN(43), { 0x000000f9 } },
+ { AR5K_RF_GAIN(44), { 0x000000f9 } },
+ { AR5K_RF_GAIN(45), { 0x000000f9 } },
+ { AR5K_RF_GAIN(46), { 0x000000f9 } },
+ { AR5K_RF_GAIN(47), { 0x000000f9 } },
+ { AR5K_RF_GAIN(48), { 0x000000f9 } },
+ { AR5K_RF_GAIN(49), { 0x000000f9 } },
+ { AR5K_RF_GAIN(50), { 0x000000f9 } },
+ { AR5K_RF_GAIN(51), { 0x000000f9 } },
+ { AR5K_RF_GAIN(52), { 0x000000f9 } },
+ { AR5K_RF_GAIN(53), { 0x000000f9 } },
+ { AR5K_RF_GAIN(54), { 0x000000f9 } },
+ { AR5K_RF_GAIN(55), { 0x000000f9 } },
+ { AR5K_RF_GAIN(56), { 0x000000f9 } },
+ { AR5K_RF_GAIN(57), { 0x000000f9 } },
+ { AR5K_RF_GAIN(58), { 0x000000f9 } },
+ { AR5K_RF_GAIN(59), { 0x000000f9 } },
+ { AR5K_RF_GAIN(60), { 0x000000f9 } },
+ { AR5K_RF_GAIN(61), { 0x000000f9 } },
+ { AR5K_RF_GAIN(62), { 0x000000f9 } },
+ { AR5K_RF_GAIN(63), { 0x000000f9 } },
+};
+
static const struct ath5k_gain_opt rfgain_opt_5112 = {
1,
8,
@@ -1588,8 +1656,8 @@ int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
freq = 0; /* only 2Ghz */
break;
case AR5K_RF2425:
- ath5k_rfg = rfgain_2413;
- size = ARRAY_SIZE(rfgain_2413);
+ ath5k_rfg = rfgain_2425;
+ size = ARRAY_SIZE(rfgain_2425);
freq = 0; /* only 2Ghz */
break;
default:
next reply other threads:[~2008-07-20 3:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-20 3:42 Nick Kossifidis [this message]
2008-07-24 21:39 ` [PATCH 7/12] ath5k: Add RF2425 initial rfgain values Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080720034247.GG7440@makis \
--to=mick@madwifi.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=jirislaby@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.