All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas PEGEOT <thomas.pegeot@gmail.com>
To: video4linux-list@redhat.com
Subject: Issue with Hauppauge hvr-1100 and 2.6.26
Date: Sun, 20 Jul 2008 20:15:05 +0200	[thread overview]
Message-ID: <200807202015.05795.thomas.pegeot@gmail.com> (raw)

Hello,

My dvb card (Hauppauge HVR-1100 - cx88) is running fine with kernels prior to 
2.6.25. Unfortunately I lost my working .config file ... so i had to compile 
the 2.6.26 kernel from scratch and my tv card does not work any more.
Is there any thing that i forgot to enable ? 

Thank you in advance. 

Regards

The dmesg command shows the following output : 

divide error: 0000 [1] PREEMPT
CPU 0
Modules linked in: nouveau drm cx88_dvb dvb_pll videobuf_dvb tuner cx8800 
cx8802 cx88_alsa cx88xx k8temp ir_common i2c_algo_bit tveeprom btcx_risc 
i2c_nforce2 sky2 videobuf_dma_sg videobuf_core
Pid: 3881, comm: kdvb-fe-0 Not tainted 2.6.26 #1
RIP: 0010:[<ffffffff80414341>]  [<ffffffff80414341>] 
simple_dvb_calc_regs+0x99/0x223
RSP: 0018:ffff810026235d30  EFLAGS: 00010246
RAX: 000000002de54480 RBX: ffff810026235dc0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff80733f20 RDI: ffff81003ed9b810
RBP: ffff810026235da0 R08: ffff810026235d76 R09: 0000000000000001
R10: 00000007518a83aa R11: ffff810026238588 R12: ffff81003ed9b810
R13: ffff81003eccd640 R14: ffff81003ed9b408 R15: ffff81003ed9b810
FS:  00007f8e57672750(0000) GS:ffffffff80755000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00007f8e568f1eb5 CR3: 0000000026094000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kdvb-fe-0 (pid: 3881, threadinfo ffff810026234000, task 
ffff810026238540)
Stack:  ffffffff807b9930 00000000ffffffff 0000004295938ee2 00000000ffffffff
 ffff810026235d90 ffffffff80223498 ffffffff807330a0 0000000000000000
 8e017fff00003020 ffff81003eccd640 ffff81003ed9b810 0000000000000000
Call Trace:
 [<ffffffff80223498>] ? hrtick_set+0xbe/0x139
 [<ffffffff804146a2>] simple_dvb_set_params+0x3f/0xbe
 [<ffffffff80231f08>] ? lock_timer_base+0x2f/0x6c
 [<ffffffff80231f08>] ? lock_timer_base+0x2f/0x6c
 [<ffffffff8042dbb6>] cx22702_set_tps+0x28/0x1d0
 [<ffffffff804299ca>] dvb_frontend_swzigzag_autotune+0x190/0x1b7
 [<ffffffff8042a1da>] dvb_frontend_swzigzag+0x1bc/0x21e
 [<ffffffff8042a550>] dvb_frontend_thread+0x314/0x3f2
 [<ffffffff8023c34a>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8042a23c>] ? dvb_frontend_thread+0x0/0x3f2
 [<ffffffff8023be81>] kthread+0x49/0x76
 [<ffffffff8020bc78>] child_rip+0xa/0x12
 [<ffffffff8023be38>] ? kthread+0x0/0x76
 [<ffffffff8020bc6e>] ? child_rip+0x0/0x12


Code: 00 00 48 8b 45 c0 8b 48 1c 48 8b 05 9a 1d 42 00 0f b7 40 0a 89 ca 03 45 
d0 d1 ea 69 c0 24 f4 00 00 03 05 93 1d 42 00 01 d0 31 d2 <f7> f1 8a 55 d6 88 
53 04 41 89 c4 c1 e8 08 88 43 01 8a 45 d7 44
RIP  [<ffffffff80414341>] simple_dvb_calc_regs+0x99/0x223
 RSP <ffff810026235d30>
---[ end trace 49544f812ce3f799 ]---

Here is an extract of my .config : 
#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_V4L_USB_DRIVERS is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
CONFIG_DVB_CX24123=m
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=y
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_TDA10048 is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_OR51132=m
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
CONFIG_DVB_S5H1411=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
# CONFIG_DVB_TUNER_DIB0070 is not set

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
# CONFIG_DAB is not set

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

             reply	other threads:[~2008-07-20 18:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-20 18:15 Thomas PEGEOT [this message]
2008-07-26 13:40 ` Issue with Hauppauge hvr-1100 and 2.6.26 Thomas Pegeot
2008-07-26 15:16   ` Andy Walls

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200807202015.05795.thomas.pegeot@gmail.com \
    --to=thomas.pegeot@gmail.com \
    --cc=video4linux-list@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.