From: Ingo Molnar <mingo@elte.hu>
To: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>,
Pekka Enberg <penberg@cs.helsinki.fi>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
"Rafael J. Wysocki" <rjw@sisk.pl>,
cl@linux-foundation.org, davem@davemloft.net
Subject: Re: [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten
Date: Mon, 21 Jul 2008 13:13:22 +0200 [thread overview]
Message-ID: <20080721111322.GA17251@elte.hu> (raw)
In-Reply-To: <19f34abd0807210403n1bca348fn83773b55a08b7993@mail.gmail.com>
* Vegard Nossum <vegard.nossum@gmail.com> wrote:
> On Mon, Jul 21, 2008 at 12:50 PM, Ingo Molnar <mingo@elte.hu> wrote:
> > the problem is, most of the crashes dont come with any usable dump. This
> > is a laptop so netconsole is the only reliable route out - and if
> > something in networking crashes chances are that it hoses netconsole
> > before it can get anything out.
> >
> > Another thing is that i'm activating netconsole on this box via a kernel
> > boot line and from within a bzImage (to get it activated as early as
> > possible) - maybe that's a tad too early for certain initialization
> > sequences?
> >
> > I could try run tests with netconsole deactivated, if you think
> > that's a worthwile line of probing this problem. (although that
> > would make me do blind tests in essence - having kernel log output
> > is really essential.)
>
> How about posting your custom patches for public review? :-D
I changed nothing in that area - being able to enable the netconsole
like that has been a years-old feature. Otherwise it's just tip/master,
but the weirdnesses were reproducible under plain linus/master as well.
> (There was recently an odd case of kzalloc() succeeding even though it
> was called before the slab caches were initialized -- and it only
> generated a warning about irqs-on happening too early. I just mean to
> say that it _can_ happen. On another machine, it crashed
> spectacularly. I guess you're not enabling the netconsole before slab
> allocator is up?)
if i had any changes in that area i'd have declared them. Find below the
full bootlog of the last crash - can you see any init order weirdness in
it?
Btw., i disabled netconsole now and got 3 successful bootups in a row.
(which is still not significant statistically - i had a series of 40
bootups in a row before. Then again i had like 5 failures in a row
earlier this morning, before disabling netconsole.)
Btw. #2, in the log below you can see this partial line:
initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@europe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008
That was a previous bootup with another failure but which came without
any log output.
Hey, if you find this report frustrating, dont worry, i almost never
report easy bugs - i can fix them just fine ;-)
Ingo
--------------->
initcall pm_qos_power_init+0x0/0x54Linux version 2.6.26-tip (mingo@europe) (gcc version 4.2.2) #3261 SMP Mon Jul 21 11:17:45 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
debug: ignoring loglevel setting.
using polling idle threads.
using polling idle threads.
last_pfn = 0x7f6e0 max_arch_pfn = 0x1000000
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
kernel direct mapping tables up to 38000000 @ 7000-c000
NX (Execute Disable) protection: active
DMI present.
ACPI: RSDP 000F68A0, 0024 (r2 LENOVO)
ACPI: XSDT 7F6E631F, 0074 (r1 LENOVO TP-79 1020 LTP 0)
ACPI: FACP 7F6E6400, 00F4 (r3 LENOVO TP-79 1020 LNVO 1)
ACPI Warning (tbfadt-0447): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
ACPI: DSDT 7F6E65E7, C765 (r1 LENOVO TP-79 1020 MSFT 100000E)
ACPI: FACS 7F6F4000, 0040
ACPI: SSDT 7F6E65B4, 0033 (r1 LENOVO TP-79 1020 MSFT 100000E)
ACPI: ECDT 7F6F2D4C, 0052 (r1 LENOVO TP-79 1020 LNVO 1)
ACPI: TCPA 7F6F2D9E, 0032 (r2 LENOVO TP-79 1020 LNVO 1)
ACPI: APIC 7F6F2DD0, 0068 (r1 LENOVO TP-79 1020 LNVO 1)
ACPI: MCFG 7F6F2E38, 003E (r1 LENOVO TP-79 1020 LNVO 1)
ACPI: HPET 7F6F2E76, 0038 (r1 LENOVO TP-79 1020 LNVO 1)
ACPI: BOOT 7F6F2FD8, 0028 (r1 LENOVO TP-79 1020 LTP 1)
ACPI: SSDT 7F6E58DA, 0507 (r1 LENOVO TP-79 1020 INTL 20050513)
ACPI: SSDT 7F6E5702, 01D8 (r1 LENOVO TP-79 1020 INTL 20050513)
Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
Entering add_active_range(0, 0x100, 0x38000) 1 entries of 256 used
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00009000 - 00010000
(8 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000ccbc50] TEXT DATA BSS ==> [0000100000 - 0000ccbc50]
#4 [0000ccc000 - 0000d18000] INIT_PG_TABLE ==> [0000ccc000 - 0000d18000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00038000
On node 0 totalpages: 229279
free_area_init_node: node 0, pgdat c081bf80, node_mem_map c1000000
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3943 pages, LIFO batch:0
Normal zone: 3080 pages used for memmap
Normal zone: 222200 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Bus #0 is ISA
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
PERCPU: Allocating 332592 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226143
Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.16/00:19:d1:01:f5:55 nmi_watchdog=2 idle=poll no_hz=off nmi_watchdog=0 nolapic_timer hpet=disable idle=mwait idle=poll nopat
kernel profiling enabled (shift: 0)
debug: sysrq always enabled.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0941000 soft=c0939000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Detected 1828.742 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1088 kB
per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 872052k/917504k available (4655k kernel code, 45060k reserved, 3079k data, 656k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb8000 - 0xfffff000 ( 284 kB)
vmalloc : 0xf8800000 - 0xfffb6000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0892000 - 0xc0936000 ( 656 kB)
.data : 0xc058bc52 - 0xc088dacc (3079 kB)
.text : 0xc0100000 - 0xc058bc52 (4655 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 16 of 16 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3657.48 BogoMIPS (lpj=1828742)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
enabled ExtINT on CPU#0
ESR value before enabling vector: 0x00000040 after: 0x00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0 not connected.
IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
++++++++++++++++++++=_---CPU UP 1
lockdep: fixing up alternatives.
CPU 1 irqstacks, hard=c0942000 soft=c093a000
Booting processor 1/1 ip 6000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
Deasserting INIT.
Waiting for send to finish...
#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
Startup point 1.
CPU#1 (phys ID: 1) waiting for CALLOUT
Waiting for send to finish...
Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. <6>3194.05 BogoMIPS (lpj=1597026)
Stack at about f7c7efb0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
OK.
CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
CPU has booted.
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 580129 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Boot done.
Before bogomips.
Total of 2 processors activated (6851.53 BogoMIPS).
Before bogocount - setting activated=1.
khelper used greatest stack depth: 3052 bytes left
khelper used greatest stack depth: 2684 bytes left
calling init_cpufreq_transition_notifier_list+0x0/0x18
initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 msecs
calling net_ns_init+0x0/0x10f
net_namespace: 800 bytes
initcall net_ns_init+0x0/0x10f returned 0 after 0 msecs
calling cpufreq_tsc+0x0/0x13
initcall cpufreq_tsc+0x0/0x13 returned 0 after 0 msecs
calling reboot_init+0x0/0x11
initcall reboot_init+0x0/0x11 returned 0 after 0 msecs
calling sysctl_init+0x0/0x29
initcall sysctl_init+0x0/0x29 returned 0 after 0 msecs
calling ksysfs_init+0x0/0x96
initcall ksysfs_init+0x0/0x96 returned 0 after 0 msecs
calling init_jiffies_clocksource+0x0/0xf
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 msecs
calling pm_init+0x0/0x2d
initcall pm_init+0x0/0x2d returned 0 after 0 msecs
calling filelock_init+0x0/0x27
initcall filelock_init+0x0/0x27 returned 0 after 0 msecs
calling init_aout_binfmt+0x0/0xf
initcall init_aout_binfmt+0x0/0xf returned 0 after 0 msecs
calling init_misc_binfmt+0x0/0x33
initcall init_misc_binfmt+0x0/0x33 returned 0 after 0 msecs
calling init_script_binfmt+0x0/0xf
initcall init_script_binfmt+0x0/0xf returned 0 after 0 msecs
calling init_elf_binfmt+0x0/0xf
initcall init_elf_binfmt+0x0/0xf returned 0 after 0 msecs
calling debugfs_init+0x0/0x41
initcall debugfs_init+0x0/0x41 returned 0 after 0 msecs
calling securityfs_init+0x0/0x41
initcall securityfs_init+0x0/0x41 returned 0 after 0 msecs
calling random32_init+0x0/0x3f
initcall random32_init+0x0/0x3f returned 0 after 0 msecs
calling cpufreq_core_init+0x0/0x51
initcall cpufreq_core_init+0x0/0x51 returned 0 after 0 msecs
calling virtio_init+0x0/0x1f
initcall virtio_init+0x0/0x1f returned 0 after 0 msecs
calling sock_init+0x0/0x51
initcall sock_init+0x0/0x51 returned 0 after 0 msecs
calling netpoll_init+0x0/0x11
initcall netpoll_init+0x0/0x11 returned 0 after 0 msecs
calling netlink_proto_init+0x0/0x107
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x107 returned 0 after 0 msecs
calling bdi_class_init+0x0/0x33
initcall bdi_class_init+0x0/0x33 returned 0 after 0 msecs
calling kobject_uevent_init+0x0/0x3f
initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 msecs
calling pcibus_class_init+0x0/0xf
initcall pcibus_class_init+0x0/0xf returned 0 after 0 msecs
calling pci_driver_init+0x0/0xf
initcall pci_driver_init+0x0/0xf returned 0 after 0 msecs
calling lcd_class_init+0x0/0x3d
initcall lcd_class_init+0x0/0x3d returned 0 after 0 msecs
calling backlight_class_init+0x0/0x3d
initcall backlight_class_init+0x0/0x3d returned 0 after 0 msecs
calling tty_class_init+0x0/0x27
initcall tty_class_init+0x0/0x27 returned 0 after 0 msecs
calling vtconsole_class_init+0x0/0x9a
initcall vtconsole_class_init+0x0/0x9a returned 0 after 0 msecs
calling eisa_init+0x0/0x26
EISA bus registered
initcall eisa_init+0x0/0x26 returned 0 after 0 msecs
calling enable_pci_io_ecs+0x0/0x2b
initcall enable_pci_io_ecs+0x0/0x2b returned 0 after 0 msecs
calling rdc_board_setup+0x0/0x19
initcall rdc_board_setup+0x0/0x19 returned 0 after 0 msecs
calling arch_kdebugfs_init+0x0/0x1de
initcall arch_kdebugfs_init+0x0/0x1de returned 0 after 0 msecs
calling init_pit_clocksource+0x0/0x8f
initcall init_pit_clocksource+0x0/0x8f returned 0 after 0 msecs
calling ffh_cstate_init+0x0/0x2c
initcall ffh_cstate_init+0x0/0x2c returned 0 after 0 msecs
calling acpi_pci_init+0x0/0x38
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x38 returned 0 after 0 msecs
calling init_acpi_device_notify+0x0/0x43
initcall init_acpi_device_notify+0x0/0x43 returned 0 after 0 msecs
calling pci_arch_init+0x0/0x4a
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x4a returned 0 after 0 msecs
calling topology_init+0x0/0x28
initcall topology_init+0x0/0x28 returned 0 after 0 msecs
calling param_sysfs_init+0x0/0x154
initcall param_sysfs_init+0x0/0x154 returned 0 after 21 msecs
calling pm_sysrq_init+0x0/0x16
initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 msecs
calling readahead_init+0x0/0x2f
initcall readahead_init+0x0/0x2f returned 0 after 0 msecs
calling init_bio+0x0/0xa6
initcall init_bio+0x0/0xa6 returned 0 after 0 msecs
calling blk_settings_init+0x0/0x1d
initcall blk_settings_init+0x0/0x1d returned 0 after 0 msecs
calling blk_ioc_init+0x0/0x24
initcall blk_ioc_init+0x0/0x24 returned 0 after 0 msecs
calling genhd_device_init+0x0/0x32
initcall genhd_device_init+0x0/0x32 returned 0 after 0 msecs
calling pci_slot_init+0x0/0x3b
initcall pci_slot_init+0x0/0x3b returned 0 after 0 msecs
calling fbmem_init+0x0/0x73
initcall fbmem_init+0x0/0x73 returned 0 after 0 msecs
calling acpi_init+0x0/0x21b
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
initcall acpi_init+0x0/0x21b returned 0 after 67 msecs
calling acpi_scan_init+0x0/0xed
initcall acpi_scan_init+0x0/0xed returned 0 after 49 msecs
calling acpi_ec_init+0x0/0x55
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
initcall acpi_ec_init+0x0/0x55 returned 0 after 0 msecs
calling acpi_pci_root_init+0x0/0x25
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [ee100000, ee17ffff]
PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [ee200000, ee23ffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [ee180000, ee1fffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [ee444000, ee4443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
PCI: 0000:00:1f.2 reg 10 io port: [18d0, 18d7]
PCI: 0000:00:1f.2 reg 14 io port: [18c4, 18c7]
PCI: 0000:00:1f.2 reg 18 io port: [18c8, 18cf]
PCI: 0000:00:1f.2 reg 1c io port: [18c0, 18c3]
PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [ee444400, ee4447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [ee000000, ee01ffff]
PCI: 0000:02:00.0 reg 18 io port: [2000, 201f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [ee000000, ee0fffff]
PCI: 0000:03:00.0 reg 10 32bit mmio: [edf00000, edf00fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 io port: [3000, 4fff]
PCI: bridge 0000:00:1c.1 32bit mmio: [ec000000, edffffff]
PCI: bridge 0000:00:1c.1 64bit mmio pref: [e4000000, e40fffff]
PCI: bridge 0000:00:1c.2 io port: [5000, 6fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [e8000000, e9ffffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [e4100000, e41fffff]
PCI: bridge 0000:00:1c.3 io port: [7000, 8fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ebffffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [e4200000, e42fffff]
PCI: 0000:15:00.0 reg 10 32bit mmio: [e4300000, e4300fff]
pci 0000:15:00.0: supports D1
pci 0000:15:00.0: supports D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [9000, cfff]
PCI: bridge 0000:00:1e.0 32bit mmio: [e4300000, e7ffffff]
PCI: bridge 0000:00:1e.0 64bit mmio pref: [e0000000, e3ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
initcall acpi_pci_root_init+0x0/0x25 returned 0 after 43 msecs
calling acpi_pci_link_init+0x0/0x43
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 10 msecs
calling acpi_power_init+0x0/0x69
ACPI: Power Resource [PUBS] (on)
initcall acpi_power_init+0x0/0x69 returned 0 after 1 msecs
calling acpi_system_init+0x0/0x167
initcall acpi_system_init+0x0/0x167 returned 0 after 0 msecs
calling acpi_cm_sbs_init+0x0/0x7
initcall acpi_cm_sbs_init+0x0/0x7 returned 0 after 0 msecs
calling pnp_init+0x0/0x19
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x19 returned 0 after 0 msecs
calling pnpacpi_init+0x0/0x7b
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: parse allocated resources
pnp 00:00: add mem 0x0-0x9ffff flags 0x1
pnp 00:00: add mem 0xc0000-0xc3fff flags 0x0
pnp 00:00: add mem 0xc4000-0xc7fff flags 0x0
pnp 00:00: add mem 0xc8000-0xcbfff flags 0x0
pnp 00:00: add mem 0xcc000-0xcffff flags 0x0
pnp 00:00: add mem 0xd0000-0xd3fff flags 0x0
pnp 00:00: add mem 0xd4000-0xd3fff flags 0x10000000
pnp 00:00: add mem 0xd8000-0xd7fff flags 0x10000000
pnp 00:00: add mem 0xdc000-0xdffff flags 0x1
pnp 00:00: add mem 0xe0000-0xe3fff flags 0x0
pnp 00:00: add mem 0xe4000-0xe7fff flags 0x0
pnp 00:00: add mem 0xe8000-0xebfff flags 0x0
pnp 00:00: add mem 0xec000-0xeffff flags 0x0
pnp 00:00: add mem 0xf0000-0xfffff flags 0x0
pnp 00:00: add mem 0x100000-0x7fffffff flags 0x1
pnp 00:00: add mem 0xfec00000-0xffffffff flags 0x0
pnp 00:00: add mem 0xfed41000-0xfed40fff flags 0x10000000
pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x188
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: parse allocated resources
pnp 00:01: add io 0xcf8-0xcff flags 0x1
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: parse allocated resources
pnp 00:02: add io 0x10-0x1f flags 0x1
pnp 00:02: add io 0x90-0x9f flags 0x1
pnp 00:02: add io 0x24-0x25 flags 0x1
pnp 00:02: add io 0x28-0x29 flags 0x1
pnp 00:02: add io 0x2c-0x2d flags 0x1
pnp 00:02: add io 0x30-0x31 flags 0x1
pnp 00:02: add io 0x34-0x35 flags 0x1
pnp 00:02: add io 0x38-0x39 flags 0x1
pnp 00:02: add io 0x3c-0x3d flags 0x1
pnp 00:02: add io 0xa4-0xa5 flags 0x1
pnp 00:02: add io 0xa8-0xa9 flags 0x1
pnp 00:02: add io 0xac-0xad flags 0x1
pnp 00:02: add io 0xb0-0xb5 flags 0x1
pnp 00:02: add io 0xb8-0xb9 flags 0x1
pnp 00:02: add io 0xbc-0xbd flags 0x1
pnp 00:02: add io 0x50-0x53 flags 0x1
pnp 00:02: add io 0x72-0x77 flags 0x1
pnp 00:02: add io 0x164e-0x164f flags 0x1
pnp 00:02: add io 0x2e-0x2f flags 0x1
pnp 00:02: add io 0x1000-0x107f flags 0x1
pnp 00:02: add io 0x1180-0x11bf flags 0x1
pnp 00:02: add io 0x800-0x80f flags 0x1
pnp 00:02: add io 0x15e0-0x15ef flags 0x1
pnp 00:02: add io 0x1600-0x165f flags 0x1
pnp 00:02: add mem 0xf0000000-0xf3ffffff flags 0x1
pnp 00:02: add mem 0xfed1c000-0xfed1ffff flags 0x1
pnp 00:02: add mem 0xfed14000-0xfed17fff flags 0x1
pnp 00:02: add mem 0xfed18000-0xfed18fff flags 0x1
pnp 00:02: add mem 0xfed19000-0xfed19fff flags 0x1
pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x188
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: parse allocated resources
pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: parse allocated resources
pnp 00:04: add io 0x0-0xf flags 0x1
pnp 00:04: add io 0x80-0x8f flags 0x1
pnp 00:04: add io 0xc0-0xdf flags 0x1
pnp 00:04: add dma 4 flags 0x5
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: parse allocated resources
pnp 00:05: add io 0x61-0x61 flags 0x1
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: parse allocated resources
pnp 00:06: add io 0xf0-0xf0 flags 0x1
pnp 00:06: add irq 13 flags 0x1
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: parse allocated resources
pnp 00:07: add io 0x70-0x71 flags 0x1
pnp 00:07: add irq 8 flags 0x1
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: parse allocated resources
pnp 00:08: add io 0x60-0x60 flags 0x1
pnp 00:08: add io 0x64-0x64 flags 0x1
pnp 00:08: add irq 1 flags 0x1
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: parse allocated resources
pnp 00:09: add irq 12 flags 0x1
pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:0a: parse allocated resources
pnp 00:0a: add io 0x2f8-0x2ff flags 0x1
pnp 00:0a: add irq 3 flags 0x1
pnp 00:0a: add dma 3 flags 0x0
pnp 00:0a: parse resource options
pnp 00:0a: dependent set 0 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 0 (preferred) irq 3 flags 0x1
pnp 00:0a: dependent set 0 (preferred) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 1 (acceptable) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 1 (acceptable) irq 4 flags 0x1
pnp 00:0a: dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 2 (acceptable) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 2 (acceptable) irq 3 flags 0x1
pnp 00:0a: dependent set 2 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 3 (acceptable) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 3 (acceptable) irq 4 flags 0x1
pnp 00:0a: dependent set 3 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 4 (functional) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 4 (functional) irq 4 5 7 flags 0x1
pnp 00:0a: dependent set 4 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 5 (functional) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 5 (functional) irq 3 5 7 flags 0x1
pnp 00:0a: dependent set 5 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 6 (functional) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 6 (functional) irq 4 5 7 flags 0x1
pnp 00:0a: dependent set 6 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: dependent set 7 (functional) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
pnp 00:0a: dependent set 7 (functional) irq 3 5 7 flags 0x1
pnp 00:0a: dependent set 7 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0
pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x7b returned 0 after 26 msecs
calling misc_init+0x0/0x7f
initcall misc_init+0x0/0x7f returned 0 after 0 msecs
calling cn_init+0x0/0xcb
initcall cn_init+0x0/0xcb returned 0 after 0 msecs
calling tifm_init+0x0/0x6d
initcall tifm_init+0x0/0x6d returned 0 after 0 msecs
calling phy_init+0x0/0x29
initcall phy_init+0x0/0x29 returned 0 after 0 msecs
calling init_scsi+0x0/0x79
SCSI subsystem initialized
initcall init_scsi+0x0/0x79 returned 0 after 0 msecs
calling ata_init+0x0/0x2a4
libata version 3.00 loaded.
initcall ata_init+0x0/0x2a4 returned 0 after 0 msecs
calling spi_init+0x0/0x68
initcall spi_init+0x0/0x68 returned 0 after 0 msecs
calling usb_init+0x0/0xfd
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0xfd returned 0 after 1 msecs
calling serio_init+0x0/0x82
initcall serio_init+0x0/0x82 returned 0 after 0 msecs
calling gameport_init+0x0/0x82
initcall gameport_init+0x0/0x82 returned 0 after 0 msecs
calling input_init+0x0/0xd7
initcall input_init+0x0/0xd7 returned 0 after 0 msecs
calling i2c_init+0x0/0x4f
i2c-core: driver [dummy] registered
initcall i2c_init+0x0/0x4f returned 0 after 0 msecs
calling power_supply_class_init+0x0/0x29
initcall power_supply_class_init+0x0/0x29 returned 0 after 0 msecs
calling thermal_init+0x0/0x41
initcall thermal_init+0x0/0x41 returned 0 after 0 msecs
calling mmc_init+0x0/0x6b
initcall mmc_init+0x0/0x6b returned 0 after 0 msecs
calling leds_init+0x0/0x27
initcall leds_init+0x0/0x27 returned 0 after 0 msecs
calling dma_bus_init+0x0/0x23
initcall dma_bus_init+0x0/0x23 returned 0 after 0 msecs
calling pci_subsys_init+0x0/0xe6
PCI: Using ACPI for IRQ routing
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170020
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 1 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 1 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 1 0 0 0 0 1 1 69
09 003 03 0 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 1 0 0 0 0 1 1 89
0d 003 03 1 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall pci_subsys_init+0x0/0xe6 returned 0 after 6 msecs
calling proto_init+0x0/0x27
initcall proto_init+0x0/0x27 returned 0 after 0 msecs
calling net_dev_init+0x0/0x12f
initcall net_dev_init+0x0/0x12f returned 0 after 0 msecs
calling neigh_init+0x0/0x66
initcall neigh_init+0x0/0x66 returned 0 after 0 msecs
calling fib_rules_init+0x0/0x99
initcall fib_rules_init+0x0/0x99 returned 0 after 0 msecs
calling genl_init+0x0/0xb0
initcall genl_init+0x0/0xb0 returned 0 after 0 msecs
calling cipso_v4_init+0x0/0x6d
initcall cipso_v4_init+0x0/0x6d returned 0 after 0 msecs
calling bt_init+0x0/0x50
Bluetooth: Core ver 2.12
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x50 returned 0 after 0 msecs
calling atm_init+0x0/0x9c
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0x9c returned 0 after 0 msecs
calling wireless_nlevent_init+0x0/0x39
initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 msecs
calling netlbl_init+0x0/0x6d
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x6d returned 0 after 0 msecs
calling rfkill_init+0x0/0x5a
initcall rfkill_init+0x0/0x5a returned 0 after 0 msecs
calling sysctl_init+0x0/0x2d
initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs
calling pci_iommu_init+0x0/0xc
initcall pci_iommu_init+0x0/0xc returned 0 after 0 msecs
calling hpet_late_init+0x0/0xfb
initcall hpet_late_init+0x0/0xfb returned -19 after 0 msecs
calling clocksource_done_booting+0x0/0x11
initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 msecs
calling init_pipe_fs+0x0/0x41
initcall init_pipe_fs+0x0/0x41 returned 0 after 0 msecs
calling init_mnt_writers+0x0/0x61
initcall init_mnt_writers+0x0/0x61 returned 0 after 0 msecs
calling eventpoll_init+0x0/0x7d
initcall eventpoll_init+0x0/0x7d returned 0 after 0 msecs
calling anon_inode_init+0x0/0xdf
initcall anon_inode_init+0x0/0xdf returned 0 after 0 msecs
calling acpi_rtc_init+0x0/0xd4
ACPI: RTC can wake from S4
initcall acpi_rtc_init+0x0/0xd4 returned 0 after 0 msecs
calling acpi_event_init+0x0/0x46
initcall acpi_event_init+0x0/0x46 returned 0 after 0 msecs
calling pnp_system_init+0x0/0xf
pnp: the driver 'system' has been registered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:00: driver attached
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: driver attached
initcall pnp_system_init+0x0/0xf returned 0 after 1 msecs
calling chr_dev_init+0x0/0x86
initcall chr_dev_init+0x0/0x86 returned 0 after 1 msecs
calling firmware_class_init+0x0/0x5c
initcall firmware_class_init+0x0/0x5c returned 0 after 0 msecs
calling loopback_init+0x0/0xf
initcall loopback_init+0x0/0xf returned 0 after 0 msecs
calling cpufreq_gov_performance_init+0x0/0xf
initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 msecs
calling cpufreq_gov_dbs_init+0x0/0xf
initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 0 msecs
calling init_acpi_pm_clocksource+0x0/0x152
PM-Timer running at invalid rate: 87% of normal - aborting.
initcall init_acpi_pm_clocksource+0x0/0x152 returned -19 after 28 msecs
calling ssb_modinit+0x0/0x41
initcall ssb_modinit+0x0/0x41 returned 0 after 0 msecs
calling pcibios_assign_resources+0x0/0x91
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x4fff
pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0x5000-0x6fff
pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.3: IO window: 0x7000-0x8fff
pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff
pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0: IO window: 0x009000-0x0090ff
pci 0000:15:00.0: IO window: 0x009400-0x0094ff
pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff
pci 0000:15:00.0: MEM window: 0x88000000-0x8bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0: IO window: 0x9000-0xcfff
pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
vendor=8086 device=2448
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 02 index 0 io port: [2000, 2fff]
bus: 02 index 1 mmio: [ee000000, ee0fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [3000, 4fff]
bus: 03 index 1 mmio: [ec000000, edffffff]
bus: 03 index 2 mmio: [e4000000, e40fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [5000, 6fff]
bus: 04 index 1 mmio: [e8000000, e9ffffff]
bus: 04 index 2 mmio: [e4100000, e41fffff]
bus: 04 index 3 mmio: [0, 0]
bus: 0c index 0 io port: [7000, 8fff]
bus: 0c index 1 mmio: [ea000000, ebffffff]
bus: 0c index 2 mmio: [e4200000, e42fffff]
bus: 0c index 3 mmio: [0, 0]
bus: 15 index 0 io port: [9000, cfff]
bus: 15 index 1 mmio: [e4300000, e7ffffff]
bus: 15 index 2 mmio: [e0000000, e3ffffff]
bus: 15 index 3 io port: [0, ffff]
bus: 15 index 4 mmio: [0, ffffffffffffffff]
bus: 16 index 0 io port: [9000, 90ff]
bus: 16 index 1 io port: [9400, 94ff]
bus: 16 index 2 mmio: [e0000000, e3ffffff]
bus: 16 index 3 mmio: [88000000, 8bffffff]
initcall pcibios_assign_resources+0x0/0x91 returned 0 after 4 msecs
calling inet_init+0x0/0x1be
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x1be returned 0 after 11 msecs
calling af_unix_init+0x0/0x47
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x47 returned 0 after 0 msecs
calling populate_rootfs+0x0/0x102
initcall populate_rootfs+0x0/0x102 returned 0 after 1 msecs
calling pci_init+0x0/0x2c
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
pci 0000:00:1d.3: Performing full reset
initcall pci_init+0x0/0x2c returned 0 after 0 msecs
calling ehci_hcd_init+0x0/0x70
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-tip ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
initcall ehci_hcd_init+0x0/0x70 returned 0 after 116 msecs
calling ohci_hcd_mod_init+0x0/0xb0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
initcall ohci_hcd_mod_init+0x0/0xb0 returned 0 after 0 msecs
calling uhci_hcd_init+0x0/0xc7
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Pin 1-16 already programmed
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 8 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
Pin 1-19 already programmed
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26-tip uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
initcall uhci_hcd_init+0x0/0xc7 returned 0 after 402 msecs
calling i8259A_init_sysfs+0x0/0x1d
initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 msecs
calling sbf_init+0x0/0xbd
Simple Boot Flag at 0x35 set to 0x1
initcall sbf_init+0x0/0xbd returned 0 after 0 msecs
calling i8237A_init_sysfs+0x0/0x1d
initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 msecs
calling add_rtc_cmos+0x0/0x1a
initcall add_rtc_cmos+0x0/0x1a returned 0 after 0 msecs
calling cache_sysfs_init+0x0/0x47
initcall cache_sysfs_init+0x0/0x47 returned 0 after 0 msecs
calling eps_init+0x0/0x3e
initcall eps_init+0x0/0x3e returned -19 after 0 msecs
calling nforce2_init+0x0/0x5e
cpufreq: No nForce2 chipset.
initcall nforce2_init+0x0/0x5e returned -19 after 0 msecs
calling microcode_init+0x0/0xa2
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
initcall microcode_init+0x0/0xa2 returned 0 after 0 msecs
calling init_lapic_sysfs+0x0/0x38
initcall init_lapic_sysfs+0x0/0x38 returned 0 after 0 msecs
calling ioapic_init_sysfs+0x0/0x84
initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 0 msecs
calling add_pcspkr+0x0/0x35
initcall add_pcspkr+0x0/0x35 returned 0 after 0 msecs
calling start_pageattr_test+0x0/0x38
initcall start_pageattr_test+0x0/0x38 returned 0 after 0 msecs
calling debug_pagealloc_proc_init+0x0/0x27
initcall debug_pagealloc_proc_init+0x0/0x27 returned 0 after 0 msecs
calling aes_init+0x0/0xf
initcall aes_init+0x0/0xf returned 0 after 0 msecs
calling init+0x0/0xf
initcall init+0x0/0xf returned 0 after 0 msecs
calling init+0x0/0xf
initcall init+0x0/0xf returned 0 after 0 msecs
calling create_proc_profile+0x0/0x19f
initcall create_proc_profile+0x0/0x19f returned 0 after 0 msecs
calling ioresources_init+0x0/0x2d
initcall ioresources_init+0x0/0x2d returned 0 after 0 msecs
calling uid_cache_init+0x0/0x5e
initcall uid_cache_init+0x0/0x5e returned 0 after 0 msecs
calling init_posix_timers+0x0/0x7c
initcall init_posix_timers+0x0/0x7c returned 0 after 0 msecs
calling init_posix_cpu_timers+0x0/0x90
initcall init_posix_cpu_timers+0x0/0x90 returned 0 after 0 msecs
calling nsproxy_cache_init+0x0/0x27
initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 msecs
calling timekeeping_init_device+0x0/0x1d
initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 msecs
calling init_clocksource_sysfs+0x0/0x43
initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 0 msecs
calling init_timer_list_procfs+0x0/0x27
initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 msecs
calling lockdep_proc_init+0x0/0x5f
initcall lockdep_proc_init+0x0/0x5f returned 0 after 0 msecs
calling futex_init+0x0/0x6f
initcall futex_init+0x0/0x6f returned 0 after 0 msecs
calling init_rttest+0x0/0x102
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x102 returned 0 after 1 msecs
calling proc_dma_init+0x0/0x1c
initcall proc_dma_init+0x0/0x1c returned 0 after 0 msecs
calling percpu_modinit+0x0/0x64
initcall percpu_modinit+0x0/0x64 returned 0 after 0 msecs
calling kallsyms_init+0x0/0x1f
initcall kallsyms_init+0x0/0x1f returned 0 after 0 msecs
calling crash_save_vmcoreinfo_init+0x0/0x316
initcall crash_save_vmcoreinfo_init+0x0/0x316 returned 0 after 0 msecs
calling crash_notes_memory_init+0x0/0x36
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 msecs
calling pid_namespaces_init+0x0/0x27
initcall pid_namespaces_init+0x0/0x27 returned 0 after 0 msecs
calling audit_init+0x0/0xc4
audit: initializing netlink socket (disabled)
type=2000 audit(1216632057.064:1): initialized
initcall audit_init+0x0/0xc4 returned 0 after 0 msecs
calling init_kprobes+0x0/0xfc
Kprobe smoke test started
Kprobe smoke test passed successfully
initcall init_kprobes+0x0/0xfc returned 0 after 14 msecs
calling relay_init+0x0/0x11
initcall relay_init+0x0/0x11 returned 0 after 0 msecs
calling utsname_sysctl_init+0x0/0x11
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 msecs
calling init_per_zone_pages_min+0x0/0x48
initcall init_per_zone_pages_min+0x0/0x48 returned 0 after 0 msecs
calling pdflush_init+0x0/0x16
initcall pdflush_init+0x0/0x16 returned 0 after 0 msecs
calling kswapd_init+0x0/0x1d
initcall kswapd_init+0x0/0x1d returned 0 after 0 msecs
calling setup_vmstat+0x0/0x37
initcall setup_vmstat+0x0/0x37 returned 0 after 0 msecs
calling init_tmpfs+0x0/0xb9
initcall init_tmpfs+0x0/0xb9 returned 0 after 0 msecs
calling slab_sysfs_init+0x0/0xb7
initcall slab_sysfs_init+0x0/0xb7 returned 0 after 30 msecs
calling fasync_init+0x0/0x24
initcall fasync_init+0x0/0x24 returned 0 after 0 msecs
calling aio_setup+0x0/0x64
initcall aio_setup+0x0/0x64 returned 0 after 0 msecs
calling init_mbcache+0x0/0x11
initcall init_mbcache+0x0/0x11 returned 0 after 0 msecs
calling dquot_init+0x0/0xdd
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xdd returned 0 after 0 msecs
calling init_v1_quota_format+0x0/0xf
initcall init_v1_quota_format+0x0/0xf returned 0 after 0 msecs
calling dnotify_init+0x0/0x24
initcall dnotify_init+0x0/0x24 returned 0 after 0 msecs
calling configfs_init+0x0/0xbb
initcall configfs_init+0x0/0xbb returned 0 after 0 msecs
calling init_devpts_fs+0x0/0x33
initcall init_devpts_fs+0x0/0x33 returned 0 after 0 msecs
calling init_reiserfs_fs+0x0/0x72
initcall init_reiserfs_fs+0x0/0x72 returned 0 after 0 msecs
calling init_ext3_fs+0x0/0x5f
initcall init_ext3_fs+0x0/0x5f returned 0 after 0 msecs
calling init_ext4_fs+0x0/0x5f
initcall init_ext4_fs+0x0/0x5f returned 0 after 0 msecs
calling journal_init+0x0/0xb6
initcall journal_init+0x0/0xb6 returned 0 after 1 msecs
calling journal_init+0x0/0xd3
initcall journal_init+0x0/0xd3 returned 0 after 1 msecs
calling init_ramfs_fs+0x0/0xf
initcall init_ramfs_fs+0x0/0xf returned 0 after 0 msecs
calling init_fat_fs+0x0/0x46
initcall init_fat_fs+0x0/0x46 returned 0 after 0 msecs
calling init_msdos_fs+0x0/0xf
initcall init_msdos_fs+0x0/0xf returned 0 after 0 msecs
calling init_bfs_fs+0x0/0x4f
initcall init_bfs_fs+0x0/0x4f returned 0 after 0 msecs
calling init_hfsplus_fs+0x0/0x50
initcall init_hfsplus_fs+0x0/0x50 returned 0 after 0 msecs
calling vxfs_init+0x0/0x4d
initcall vxfs_init+0x0/0x4d returned 0 after 0 msecs
calling init_nfs_fs+0x0/0xfc
initcall init_nfs_fs+0x0/0xfc returned 0 after 1 msecs
calling init_nlm+0x0/0x1c
initcall init_nlm+0x0/0x1c returned 0 after 0 msecs
calling init_nls_cp437+0x0/0xf
initcall init_nls_cp437+0x0/0xf returned 0 after 0 msecs
calling init_nls_cp865+0x0/0xf
initcall init_nls_cp865+0x0/0xf returned 0 after 0 msecs
calling init_nls_cp932+0x0/0xf
initcall init_nls_cp932+0x0/0xf returned 0 after 0 msecs
calling init_nls_euc_jp+0x0/0x39
initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 msecs
calling init_nls_cp936+0x0/0xf
initcall init_nls_cp936+0x0/0xf returned 0 after 0 msecs
calling init_nls_cp949+0x0/0xf
initcall init_nls_cp949+0x0/0xf returned 0 after 0 msecs
calling init_nls_cp1251+0x0/0xf
initcall init_nls_cp1251+0x0/0xf returned 0 after 0 msecs
calling init_nls_ascii+0x0/0xf
initcall init_nls_ascii+0x0/0xf returned 0 after 0 msecs
calling init_nls_iso8859_1+0x0/0xf
initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 msecs
calling init_nls_iso8859_13+0x0/0xf
initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 msecs
calling init_nls_iso8859_14+0x0/0xf
initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 msecs
calling init_nls_koi8_u+0x0/0xf
initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 msecs
calling init_nls_koi8_ru+0x0/0x39
initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 msecs
calling init_nls_utf8+0x0/0x1f
initcall init_nls_utf8+0x0/0x1f returned 0 after 0 msecs
calling init_sysv_fs+0x0/0x43
initcall init_sysv_fs+0x0/0x43 returned 0 after 0 msecs
calling init_ncp_fs+0x0/0x4f
initcall init_ncp_fs+0x0/0x4f returned 0 after 0 msecs
calling init_ntfs_fs+0x0/0x199
NTFS driver 2.1.29 [Flags: R/O].
initcall init_ntfs_fs+0x0/0x199 returned 0 after 0 msecs
calling init_autofs4_fs+0x0/0xf
initcall init_autofs4_fs+0x0/0xf returned 0 after 0 msecs
calling fuse_init+0x0/0xf8
fuse init (API version 7.9)
initcall fuse_init+0x0/0xf8 returned 0 after 0 msecs
calling ipc_init+0x0/0x20
msgmni has been set to 1703
initcall ipc_init+0x0/0x20 returned 0 after 0 msecs
calling ipc_sysctl_init+0x0/0x11
initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 msecs
calling key_proc_init+0x0/0x2c
initcall key_proc_init+0x0/0x2c returned 0 after 0 msecs
calling selinux_nf_ip_init+0x0/0x68
SELinux: Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x68 returned 0 after 0 msecs
calling init_sel_fs+0x0/0x5a
initcall init_sel_fs+0x0/0x5a returned 0 after 0 msecs
calling selnl_init+0x0/0x46
initcall selnl_init+0x0/0x46 returned 0 after 0 msecs
calling sel_netif_init+0x0/0x57
initcall sel_netif_init+0x0/0x57 returned 0 after 0 msecs
calling sel_netnode_init+0x0/0x68
initcall sel_netnode_init+0x0/0x68 returned 0 after 0 msecs
calling sel_netport_init+0x0/0x68
initcall sel_netport_init+0x0/0x68 returned 0 after 0 msecs
calling aurule_init+0x0/0x30
initcall aurule_init+0x0/0x30 returned 0 after 0 msecs
calling crypto_algapi_init+0x0/0xc
initcall crypto_algapi_init+0x0/0xc returned 0 after 0 msecs
calling blkcipher_module_init+0x0/0x24
initcall blkcipher_module_init+0x0/0x24 returned 0 after 0 msecs
calling seqiv_module_init+0x0/0xf
initcall seqiv_module_init+0x0/0xf returned 0 after 0 msecs
calling cryptomgr_init+0x0/0xf
initcall cryptomgr_init+0x0/0xf returned 0 after 0 msecs
calling hmac_module_init+0x0/0xf
initcall hmac_module_init+0x0/0xf returned 0 after 0 msecs
calling crypto_xcbc_module_init+0x0/0xf
initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 msecs
calling crypto_null_mod_init+0x0/0x67
initcall crypto_null_mod_init+0x0/0x67 returned 0 after 0 msecs
calling md5_mod_init+0x0/0xf
initcall md5_mod_init+0x0/0xf returned 0 after 0 msecs
calling rmd128_mod_init+0x0/0xf
initcall rmd128_mod_init+0x0/0xf returned 0 after 0 msecs
calling sha1_generic_mod_init+0x0/0xf
initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 msecs
calling tgr192_mod_init+0x0/0x52
initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 msecs
calling crypto_cbc_module_init+0x0/0xf
initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 msecs
calling crypto_pcbc_module_init+0x0/0xf
initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 msecs
calling crypto_module_init+0x0/0xf
initcall crypto_module_init+0x0/0xf returned 0 after 0 msecs
calling crypto_ctr_module_init+0x0/0x33
initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 0 msecs
calling des_generic_mod_init+0x0/0x33
initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 msecs
calling fcrypt_mod_init+0x0/0xf
initcall fcrypt_mod_init+0x0/0xf returned 0 after 0 msecs
calling twofish_mod_init+0x0/0xf
initcall twofish_mod_init+0x0/0xf returned 0 after 0 msecs
calling aes_init+0x0/0x2ac
initcall aes_init+0x0/0x2ac returned 0 after 0 msecs
calling cast5_mod_init+0x0/0xf
initcall cast5_mod_init+0x0/0xf returned 0 after 0 msecs
calling anubis_mod_init+0x0/0xf
initcall anubis_mod_init+0x0/0xf returned 0 after 0 msecs
calling deflate_mod_init+0x0/0xf
initcall deflate_mod_init+0x0/0xf returned 0 after 0 msecs
calling crypto_authenc_module_init+0x0/0xf
initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 msecs
calling noop_init+0x0/0x11
io scheduler noop registered (default)
initcall noop_init+0x0/0x11 returned 0 after 0 msecs
calling init_kmp+0x0/0xf
initcall init_kmp+0x0/0xf returned 0 after 0 msecs
calling init_bm+0x0/0xf
initcall init_bm+0x0/0xf returned 0 after 0 msecs
calling init_fsm+0x0/0xf
initcall init_fsm+0x0/0xf returned 0 after 0 msecs
calling percpu_counter_startup+0x0/0x11
initcall percpu_counter_startup+0x0/0x11 returned 0 after 0 msecs
calling audit_classes_init+0x0/0x4f
initcall audit_classes_init+0x0/0x4f returned 0 after 0 msecs
calling pci_proc_init+0x0/0x5b
initcall pci_proc_init+0x0/0x5b returned 0 after 0 msecs
calling progearbl_init+0x0/0x53
ALI M7101 PMU not found.
initcall progearbl_init+0x0/0x53 returned 0 after 0 msecs
calling cr_backlight_init+0x0/0x60
INTEL CARILLO RANCH LPC not found.
Carillo Ranch Backlight Driver Initialized.
initcall cr_backlight_init+0x0/0x60 returned 0 after 0 msecs
calling tdfxfb_init+0x0/0xe3
initcall tdfxfb_init+0x0/0xe3 returned 0 after 0 msecs
calling vmlfb_init+0x0/0x81
vmlfb: initializing
initcall vmlfb_init+0x0/0x81 returned 0 after 0 msecs
calling arkfb_init+0x0/0x4b
initcall arkfb_init+0x0/0x4b returned 0 after 0 msecs
calling sstfb_init+0x0/0x18e
initcall sstfb_init+0x0/0x18e returned 0 after 0 msecs
calling uvesafb_init+0x0/0x360
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
initcall uvesafb_init+0x0/0x360 returned 0 after 0 msecs
calling efifb_init+0x0/0x41
initcall efifb_init+0x0/0x41 returned -19 after 0 msecs
calling acpi_reserve_resources+0x0/0xc8
initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 0 msecs
calling acpi_fan_init+0x0/0x2c
initcall acpi_fan_init+0x0/0x2c returned 0 after 0 msecs
calling irqrouter_init_sysfs+0x0/0x33
initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 0 msecs
calling acpi_pci_slot_init+0x0/0x1b
initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 0 msecs
calling acpi_container_init+0x0/0x3d
Clocksource tsc unstable (delta = -63036542 ns)
initcall acpi_container_init+0x0/0x3d returned 0 after 14 msecs
calling asus_acpi_init+0x0/0xe2
initcall asus_acpi_init+0x0/0xe2 returned -19 after 0 msecs
calling toshiba_acpi_init+0x0/0x159
initcall toshiba_acpi_init+0x0/0x159 returned -19 after 0 msecs
calling rand_initialize+0x0/0x25
initcall rand_initialize+0x0/0x25 returned 0 after 0 msecs
calling tty_init+0x0/0x18f
initcall tty_init+0x0/0x18f returned 0 after 15 msecs
calling pty_init+0x0/0x37d
usb 5-2: new full speed USB device using uhci_hcd and address 2
initcall pty_init+0x0/0x37d returned 0 after 113 msecs
calling moxa_init+0x0/0xf3
MOXA Intellio family driver version 6.0k
initcall moxa_init+0x0/0xf3 returned 0 after 30 msecs
calling mxser_module_init+0x0/0x5f8
MOXA Smartio/Industio family driver version 2.0.3
initcall mxser_module_init+0x0/0x5f8 returned 0 after 0 msecs
calling ip2_init+0x0/0x45
Computone IntelliPort Plus multiport driver version 1.2.14
initcall ip2_init+0x0/0x45 returned 0 after 0 msecs
calling riscom8_init_module+0x0/0x3bd
rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
rc0: RISCom/8 Board at 0x220 not found.
rc1: RISCom/8 Board at 0x240 not found.
rc2: RISCom/8 Board at 0x250 not found.
rc3: RISCom/8 Board at 0x260 not found.
rc: No RISCom/8 boards detected.
initcall riscom8_init_module+0x0/0x3bd returned -5 after 19 msecs
initcall riscom8_init_module+0x0/0x3bd returned with error code -5
calling applicom_init+0x0/0x42c
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x42c returned -6 after 0 msecs
initcall applicom_init+0x0/0x42c returned with error code -6
calling hpet_init+0x0/0x57
hpet_acpi_add: no address or irqs in _CRS
initcall hpet_init+0x0/0x57 returned 0 after 0 msecs
calling nvram_init+0x0/0x75
Non-volatile memory driver v1.2
initcall nvram_init+0x0/0x75 returned 0 after 0 msecs
calling toshiba_init+0x0/0x31a
toshiba: not a supported Toshiba laptop
initcall toshiba_init+0x0/0x31a returned -19 after 0 msecs
calling i8k_init+0x0/0x174
initcall i8k_init+0x0/0x174 returned -19 after 0 msecs
calling cs5535_gpio_init+0x0/0x147
cs5535_gpio: DIVIL not found
initcall cs5535_gpio_init+0x0/0x147 returned -19 after 0 msecs
calling agp_init+0x0/0x21
Linux agpgart interface v0.103
initcall agp_init+0x0/0x21 returned 0 after 0 msecs
calling agp_ati_init+0x0/0x24
initcall agp_ati_init+0x0/0x24 returned 0 after 0 msecs
calling agp_intel_init+0x0/0x24
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
usb 5-2: ep0 maxpacket = 8
agpgart: AGP aperture is 256M @ 0xd0000000
initcall agp_intel_init+0x0/0x24 returned 0 after 18 msecs
calling agp_sis_init+0x0/0x24
initcall agp_sis_init+0x0/0x24 returned 0 after 0 msecs
calling agp_via_init+0x0/0x24
initcall agp_via_init+0x0/0x24 returned 0 after 0 msecs
calling ipmi_init_msghandler_mod+0x0/0xc
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 0 msecs
calling init_ipmi_si+0x0/0x6ee
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
initcall init_ipmi_si+0x0/0x6ee returned -19 after 1 msecs
calling ipmi_wdog_init+0x0/0xfe
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0xfe returned 0 after 0 msecs
calling init_atmel+0x0/0x167
initcall init_atmel+0x0/0x167 returned -19 after 0 msecs
calling drm_core_init+0x0/0xcc
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0xcc returned 0 after 0 msecs
calling i810_init+0x0/0x19
initcall i810_init+0x0/0x19 returned 0 after 0 msecs
calling i915_init+0x0/0x19
pci 0000:00:02.0: power state changed by ACPI to D0
Pin 1-16 already programmed
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
initcall i915_init+0x0/0x19 returned 0 after 0 msecs
calling cn_proc_init+0x0/0x30
initcall cn_proc_init+0x0/0x30 returned 0 after 0 msecs
calling i810fb_init+0x0/0x35a
initcall i810fb_init+0x0/0x35a returned 0 after 0 msecs
calling serial8250_init+0x0/0x10c
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
initcall serial8250_init+0x0/0x10c returned 0 after 2 msecs
calling serial8250_pnp_init+0x0/0xf
pnp: the driver 'serial' has been registered
initcall serial8250_pnp_init+0x0/0xf returned 0 after 0 msecs
calling serial8250_pci_init+0x0/0x16
initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 msecs
calling fourport_init+0x0/0xf
initcall fourport_init+0x0/0xf returned 0 after 6 msecs
calling accent_init+0x0/0xf
initcall accent_init+0x0/0xf returned 0 after 0 msecs
calling exar_init+0x0/0xf
initcall exar_init+0x0/0xf returned 0 after 2 msecs
calling hub6_init+0x0/0xf
usb 5-2: default language 0x0409
initcall hub6_init+0x0/0xf returned 0 after 8 msecs
calling jsm_init_module+0x0/0x3a
initcall jsm_init_module+0x0/0x3a returned 0 after 0 msecs
calling isa_bus_init+0x0/0x33
initcall isa_bus_init+0x0/0x33 returned 0 after 0 msecs
calling topology_sysfs_init+0x0/0x36
initcall topology_sysfs_init+0x0/0x36 returned 0 after 0 msecs
calling xd_init+0x0/0x47a
xd: Out of memory.
initcall xd_init+0x0/0x47a returned -12 after 0 msecs
initcall xd_init+0x0/0x47a returned with error code -12
calling cpqarray_init+0x0/0x22b
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x22b returned 0 after 0 msecs
calling mm_init+0x0/0x146
MM: desc_per_page = 128
initcall mm_init+0x0/0x146 returned 0 after 0 msecs
calling nbd_init+0x0/0x28a
nbd: registered device at major 43
initcall nbd_init+0x0/0x28a returned 0 after 10 msecs
calling carm_init+0x0/0x16
initcall carm_init+0x0/0x16 returned 0 after 0 msecs
calling compal_init+0x0/0xed
initcall compal_init+0x0/0xed returned -19 after 0 msecs
calling lkdtm_module_init+0x0/0x1bf
lkdtm : Invalid command
initcall lkdtm_module_init+0x0/0x1bf returned -22 after 0 msecs
initcall lkdtm_module_init+0x0/0x1bf returned with error code -22
calling ioc4_init+0x0/0x16
initcall ioc4_init+0x0/0x16 returned 0 after 0 msecs
calling sm501_base_init+0x0/0x20
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
initcall sm501_base_init+0x0/0x20 returned 0 after 0 msecs
calling pasic3_base_init+0x0/0x14
initcall pasic3_base_init+0x0/0x14 returned -19 after 0 msecs
calling e1000_init_module+0x0/0x53
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:02:00.0: Disabling L1 ASPM
vendor=8086 device=27d0
Pin 1-16 already programmed
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
usb 5-2: New USB device found, idVendor=0483, idProduct=2016
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Biometric Coprocessor
usb 5-2: Manufacturer: STMicroelectronics
eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 2, PHY: 2, PBA No: 005301-003
initcall e1000_init_module+0x0/0x53 returned 0 after 82 msecs
calling ixgb_init_module+0x0/0x39
Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
Copyright (c) 1999-2008 Intel Corporation.
initcall ixgb_init_module+0x0/0x39 returned 0 after 0 msecs
calling t1_init_module+0x0/0x16
initcall t1_init_module+0x0/0x16 returned 0 after 0 msecs
calling cxgb3_init_module+0x0/0x1b
initcall cxgb3_init_module+0x0/0x1b returned 0 after 0 msecs
calling vcan_init_module+0x0/0x2e
vcan: Virtual CAN interface driver
initcall vcan_init_module+0x0/0x2e returned 0 after 0 msecs
calling happy_meal_probe+0x0/0x16
initcall happy_meal_probe+0x0/0x16 returned 0 after 0 msecs
calling vortex_init+0x0/0xbf
initcall vortex_init+0x0/0xbf returned 0 after 0 msecs
calling pcnet32_init_module+0x0/0x118
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
initcall pcnet32_init_module+0x0/0x118 returned 0 after 0 msecs
calling eepro100_init_module+0x0/0x16
initcall eepro100_init_module+0x0/0x16 returned 0 after 0 msecs
calling e100_init_module+0x0/0x4d
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x4d returned 0 after 0 msecs
calling epic_init+0x0/0x16
initcall epic_init+0x0/0x16 returned 0 after 0 msecs
calling r6040_init+0x0/0x16
initcall r6040_init+0x0/0x16 returned 0 after 0 msecs
calling yellowfin_init+0x0/0x16
initcall yellowfin_init+0x0/0x16 returned 0 after 0 msecs
calling ns83820_init+0x0/0x20
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
initcall ns83820_init+0x0/0x20 returned 0 after 0 msecs
calling tg3_init+0x0/0x16
initcall tg3_init+0x0/0x16 returned 0 after 0 msecs
calling bnx2_init+0x0/0x16
initcall bnx2_init+0x0/0x16 returned 0 after 0 msecs
calling bnx2x_init+0x0/0x16
initcall bnx2x_init+0x0/0x16 returned 0 after 0 msecs
calling skfd_init+0x0/0x16
initcall skfd_init+0x0/0x16 returned 0 after 0 msecs
calling net_olddevs_init+0x0/0x81
initcall net_olddevs_init+0x0/0x81 returned 0 after 8 msecs
calling init_nic+0x0/0x16
initcall init_nic+0x0/0x16 returned 0 after 0 msecs
calling ppp_init+0x0/0x83
PPP generic driver version 2.4.2
initcall ppp_init+0x0/0x83 returned 0 after 0 msecs
calling deflate_init+0x0/0x30
PPP Deflate Compression module registered
initcall deflate_init+0x0/0x30 returned 0 after 0 msecs
calling pppox_init+0x0/0xf
NET: Registered protocol family 24
initcall pppox_init+0x0/0xf returned 0 after 0 msecs
calling pppoe_init+0x0/0x81
initcall pppoe_init+0x0/0x81 returned 0 after 0 msecs
calling slip_init+0x0/0x98
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
initcall slip_init+0x0/0x98 returned 0 after 0 msecs
calling dummy_init_module+0x0/0x95
initcall dummy_init_module+0x0/0x95 returned 0 after 0 msecs
calling macvlan_init_module+0x0/0x45
initcall macvlan_init_module+0x0/0x45 returned 0 after 0 msecs
calling rtl8139_init_module+0x0/0x16
initcall rtl8139_init_module+0x0/0x16 returned 0 after 0 msecs
calling znet_probe+0x0/0x2bd
initcall znet_probe+0x0/0x2bd returned -19 after 0 msecs
calling depca_module_init+0x0/0xd4
initcall depca_module_init+0x0/0xd4 returned 0 after 0 msecs
calling lp486e_init_module+0x0/0x240
eth%d: i82596 initialization timed out
initcall lp486e_init_module+0x0/0x240 returned -19 after 0 msecs
calling s2io_starter+0x0/0x16
initcall s2io_starter+0x0/0x16 returned 0 after 0 msecs
calling enc28j60_init+0x0/0x1e
initcall enc28j60_init+0x0/0x1e returned 0 after 0 msecs
calling arcnet_init+0x0/0x50
arcnet loaded.
initcall arcnet_init+0x0/0x50 returned 0 after 0 msecs
calling arcnet_rfc1201_init+0x0/0x65
arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
initcall arcnet_rfc1201_init+0x0/0x65 returned 0 after 0 msecs
calling kaweth_init+0x0/0x25
drivers/net/usb/kaweth.c: Driver loading
usbcore: registered new interface driver kaweth
initcall kaweth_init+0x0/0x25 returned 0 after 0 msecs
calling pegasus_init+0x0/0x150
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x150 returned 0 after 0 msecs
calling tulip_init+0x0/0x2a
initcall tulip_init+0x0/0x2a returned 0 after 0 msecs
calling uli526x_init_module+0x0/0x8d
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
initcall uli526x_init_module+0x0/0x8d returned 0 after 0 msecs
calling init_netconsole+0x0/0x1bb
netconsole: local port 4444
netconsole: local IP 10.0.1.15
netconsole: interface eth0
netconsole: remote port 4444
netconsole: remote IP 10.0.1.16
netconsole: remote ethernet address 00:19:d1:01:f5:55
netconsole: device eth0 not up yet, forcing it
usb usb2: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
usb usb2: suspend_rh
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
netconsole: timeout waiting for carrier
eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1bb returned 0 after 3837 msecs
calling scsi_tgt_init+0x0/0x75
initcall scsi_tgt_init+0x0/0x75 returned 0 after 0 msecs
calling spi_transport_init+0x0/0x27
initcall spi_transport_init+0x0/0x27 returned 0 after 0 msecs
calling hp_sw_init+0x0/0xf
initcall hp_sw_init+0x0/0xf returned 0 after 0 msecs
calling clariion_init+0x0/0x26
initcall clariion_init+0x0/0x26 returned 0 after 0 msecs
calling ahc_linux_init+0x0/0x61
initcall ahc_linux_init+0x0/0x61 returned 0 after 0 msecs
calling init_st+0x0/0x146
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
initcall init_st+0x0/0x146 returned 0 after 0 msecs
calling init_sd+0x0/0xb1
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0xb1 returned 0 after 0 msecs
calling init_ch_module+0x0/0x87
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
initcall init_ch_module+0x0/0x87 returned 0 after 0 msecs
calling ahci_init+0x0/0x16
ahci 0000:00:1f.2: version 3.0
Pin 1-16 already programmed
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 222
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
initcall ahci_init+0x0/0x16 returned 0 after 1021 msecs
calling piix_init+0x0/0x24
ata_piix 0000:00:1f.1: version 2.12
Pin 1-16 already programmed
ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
ata5.00: configured for UDMA/33
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
initcall piix_init+0x0/0x24 returned 0 after 161 msecs
calling qs_ata_init+0x0/0x16
initcall qs_ata_init+0x0/0x16 returned 0 after 0 msecs
calling svia_init+0x0/0x16
initcall svia_init+0x0/0x16 returned 0 after 0 msecs
calling vsc_sata_init+0x0/0x16
initcall vsc_sata_init+0x0/0x16 returned 0 after 0 msecs
calling pdc_sata_init+0x0/0x16
initcall pdc_sata_init+0x0/0x16 returned 0 after 0 msecs
calling nv_init+0x0/0x16
initcall nv_init+0x0/0x16 returned 0 after 0 msecs
calling amd_init+0x0/0x16
initcall amd_init+0x0/0x16 returned 0 after 0 msecs
calling artop_init+0x0/0x16
initcall artop_init+0x0/0x16 returned 0 after 0 msecs
calling atiixp_init+0x0/0x16
initcall atiixp_init+0x0/0x16 returned 0 after 0 msecs
calling cmd64x_init+0x0/0x16
initcall cmd64x_init+0x0/0x16 returned 0 after 0 msecs
calling efar_init+0x0/0x16
initcall efar_init+0x0/0x16 returned 0 after 0 msecs
calling hpt3x2n_init+0x0/0x16
initcall hpt3x2n_init+0x0/0x16 returned 0 after 0 msecs
calling it8213_init+0x0/0x16
initcall it8213_init+0x0/0x16 returned 0 after 0 msecs
calling ninja32_init+0x0/0x16
initcall ninja32_init+0x0/0x16 returned 0 after 0 msecs
calling mpiix_init+0x0/0x16
initcall mpiix_init+0x0/0x16 returned 0 after 0 msecs
calling oldpiix_init+0x0/0x16
initcall oldpiix_init+0x0/0x16 returned 0 after 0 msecs
calling via_init+0x0/0x16
initcall via_init+0x0/0x16 returned 0 after 0 msecs
calling sl82c105_init+0x0/0x16
initcall sl82c105_init+0x0/0x16 returned 0 after 0 msecs
calling sis_init+0x0/0x16
initcall sis_init+0x0/0x16 returned 0 after 0 msecs
calling triflex_init+0x0/0x16
initcall triflex_init+0x0/0x16 returned 0 after 0 msecs
calling ata_generic_init+0x0/0x16
initcall ata_generic_init+0x0/0x16 returned 0 after 0 msecs
calling legacy_init+0x0/0x865
initcall legacy_init+0x0/0x865 returned -19 after 0 msecs
calling i2o_iop_init+0x0/0x41
I2O subsystem v1.325
i2o: max drivers = 8
initcall i2o_iop_init+0x0/0x41 returned 0 after 0 msecs
calling i2o_block_init+0x0/0xf7
I2O Block Device OSM v1.325
initcall i2o_block_init+0x0/0xf7 returned 0 after 0 msecs
calling i2o_proc_init+0x0/0x14e
I2O ProcFS OSM v1.316
initcall i2o_proc_init+0x0/0x14e returned 0 after 0 msecs
calling uio_init+0x0/0x7
initcall uio_init+0x0/0x7 returned 0 after 0 msecs
calling smx_ce_init_module+0x0/0xf
initcall smx_ce_init_module+0x0/0xf returned 0 after 0 msecs
calling mon_init+0x0/0xee
initcall mon_init+0x0/0xee returned 0 after 1 msecs
calling isp116x_init+0x0/0x38
116x: driver isp116x-hcd, 03 Nov 2005
initcall isp116x_init+0x0/0x38 returned 0 after 0 msecs
calling r8a66597_init+0x0/0x38
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
initcall r8a66597_init+0x0/0x38 returned 0 after 0 msecs
calling c67x00_init+0x0/0xf
initcall c67x00_init+0x0/0xf returned 0 after 0 msecs
calling usb_stor_init+0x0/0x42
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall usb_stor_init+0x0/0x42 returned 0 after 0 msecs
calling usb_usual_init+0x0/0x32
usbcore: registered new interface driver libusual
initcall usb_usual_init+0x0/0x32 returned 0 after 0 msecs
calling appledisplay_init+0x0/0x4e
usbcore: registered new interface driver appledisplay
initcall appledisplay_init+0x0/0x4e returned 0 after 0 msecs
calling cypress_init+0x0/0x2f
usbcore: registered new interface driver cypress_cy7c63
initcall cypress_init+0x0/0x2f returned 0 after 0 msecs
calling usb_cytherm_init+0x0/0x3c
usbcore: registered new interface driver cytherm
cytherm: v1.0:Cypress USB Thermometer driver
initcall usb_cytherm_init+0x0/0x3c returned 0 after 0 msecs
calling isight_firmware_init+0x0/0x16
usbcore: registered new interface driver isight_firmware
initcall isight_firmware_init+0x0/0x16 returned 0 after 0 msecs
calling usb_lcd_init+0x0/0x2f
usbcore: registered new interface driver usblcd
initcall usb_lcd_init+0x0/0x2f returned 0 after 0 msecs
calling usb_sisusb_init+0x0/0x1b
usbcore: registered new interface driver sisusb
initcall usb_sisusb_init+0x0/0x1b returned 0 after 0 msecs
calling usbatm_usb_init+0x0/0x5c
drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10
initcall usbatm_usb_init+0x0/0x5c returned 0 after 0 msecs
calling init+0x0/0x16
initcall init+0x0/0x16 returned 0 after 0 msecs
calling init+0x0/0xa7
Printer Gadget: usb_gadget_register_driver ffffffed
initcall init+0x0/0xa7 returned -19 after 0 msecs
calling i8042_init+0x0/0x31e
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:09: driver attached
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x31e returned 0 after 9 msecs
calling mousedev_init+0x0/0x51
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x51 returned 0 after 0 msecs
calling joydev_init+0x0/0xf
initcall joydev_init+0x0/0xf returned 0 after 0 msecs
calling evdev_init+0x0/0xf
initcall evdev_init+0x0/0xf returned 0 after 0 msecs
calling atkbd_init+0x0/0x20
initcall atkbd_init+0x0/0x20 returned 0 after 0 msecs
calling lkkbd_init+0x0/0x16
input: AT Translated Set 2 keyboard as /class/input/input0
initcall lkkbd_init+0x0/0x16 returned 0 after 11 msecs
calling skbd_init+0x0/0x16
initcall skbd_init+0x0/0x16 returned 0 after 0 msecs
calling inport_init+0x0/0x122
inport.c: Didn't find InPort mouse at 0x23c
initcall inport_init+0x0/0x122 returned -19 after 0 msecs
calling gpio_mouse_init+0x0/0x14
initcall gpio_mouse_init+0x0/0x14 returned -19 after 0 msecs
calling cobra_init+0x0/0x13
initcall cobra_init+0x0/0x13 returned 0 after 0 msecs
calling gf2k_init+0x0/0x13
initcall gf2k_init+0x0/0x13 returned 0 after 0 msecs
calling grip_init+0x0/0x13
initcall grip_init+0x0/0x13 returned 0 after 0 msecs
calling iforce_init+0x0/0x7
initcall iforce_init+0x0/0x7 returned 0 after 0 msecs
calling stinger_init+0x0/0x16
initcall stinger_init+0x0/0x16 returned 0 after 0 msecs
calling warrior_init+0x0/0x16
initcall warrior_init+0x0/0x16 returned 0 after 0 msecs
calling zhenhua_init+0x0/0x16
initcall zhenhua_init+0x0/0x16 returned 0 after 0 msecs
calling aiptek_init+0x0/0x38
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007): Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
aiptek: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
initcall aiptek_init+0x0/0x38 returned 0 after 0 msecs
calling kbtab_init+0x0/0x2d
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
initcall kbtab_init+0x0/0x2d returned 0 after 0 msecs
calling wacom_init+0x0/0x37
usbcore: registered new interface driver wacom
wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver
initcall wacom_init+0x0/0x37 returned 0 after 0 msecs
calling ati_remote_init+0x0/0x3c
usbcore: registered new interface driver ati_remote
ati_remote: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
initcall ati_remote_init+0x0/0x3c returned 0 after 0 msecs
calling ati_remote2_init+0x0/0x3c
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.2
initcall ati_remote2_init+0x0/0x3c returned 0 after 0 msecs
calling powermate_init+0x0/0x16
usbcore: registered new interface driver powermate
initcall powermate_init+0x0/0x16 returned 0 after 0 msecs
calling uinput_init+0x0/0xf
initcall uinput_init+0x0/0xf returned 0 after 0 msecs
calling i2c_amd8111_init+0x0/0x16
initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 msecs
calling i2c_sis96x_init+0x0/0x16
initcall i2c_sis96x_init+0x0/0x16 returned 0 after 0 msecs
calling i2c_vt586b_init+0x0/0x16
initcall i2c_vt586b_init+0x0/0x16 returned 0 after 0 msecs
calling i2c_vt596_init+0x0/0x16
initcall i2c_vt596_init+0x0/0x16 returned 0 after 0 msecs
calling i2c_gpio_init+0x0/0x2d
i2c-gpio: probe failed: -19
initcall i2c_gpio_init+0x0/0x2d returned -19 after 0 msecs
calling i2c_parport_init+0x0/0x144
i2c-parport-light: adapter type unspecified
initcall i2c_parport_init+0x0/0x144 returned -19 after 0 msecs
calling i2c_voodoo3_init+0x0/0x16
initcall i2c_voodoo3_init+0x0/0x16 returned 0 after 0 msecs
calling scx200_acb_init+0x0/0x204
scx200_acb: NatSemi SCx200 ACCESS.bus Driver
initcall scx200_acb_init+0x0/0x204 returned -19 after 0 msecs
calling ds1682_init+0x0/0x11
i2c-core: driver [ds1682] registered
initcall ds1682_init+0x0/0x11 returned 0 after 0 msecs
calling eeprom_init+0x0/0x11
i2c-core: driver [eeprom] registered
initcall eeprom_init+0x0/0x11 returned 0 after 0 msecs
calling max6875_init+0x0/0x11
i2c-core: driver [max6875] registered
initcall max6875_init+0x0/0x11 returned 0 after 0 msecs
calling pcf8591_init+0x0/0x32
i2c-core: driver [pcf8591] registered
initcall pcf8591_init+0x0/0x32 returned 0 after 0 msecs
calling w1_init+0x0/0xe4
Driver for 1-wire Dallas network protocol.
initcall w1_init+0x0/0xe4 returned 0 after 0 msecs
calling w1_gpio_init+0x0/0x14
initcall w1_gpio_init+0x0/0x14 returned -19 after 0 msecs
calling w1_smem_init+0x0/0x33
initcall w1_smem_init+0x0/0x33 returned 0 after 0 msecs
calling w1_ds2760_init+0x0/0x23
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
initcall w1_ds2760_init+0x0/0x23 returned 0 after 0 msecs
calling ds2760_battery_init+0x0/0xf
initcall ds2760_battery_init+0x0/0xf returned 0 after 0 msecs
calling bpa10x_init+0x0/0x25
Bluetooth: Digianswer Bluetooth USB driver ver 0.9
usbcore: registered new interface driver bpa10x
initcall bpa10x_init+0x0/0x25 returned 0 after 0 msecs
calling btsdio_init+0x0/0x1e
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
initcall btsdio_init+0x0/0x1e returned 0 after 0 msecs
calling pci_eisa_init_module+0x0/0x16
initcall pci_eisa_init_module+0x0/0x16 returned 0 after 0 msecs
calling cpufreq_stats_init+0x0/0x80
initcall cpufreq_stats_init+0x0/0x80 returned 0 after 0 msecs
calling mmc_test_init+0x0/0xf
initcall mmc_test_init+0x0/0xf returned 0 after 0 msecs
calling tifm_sd_init+0x0/0xf
initcall tifm_sd_init+0x0/0xf returned 0 after 0 msecs
calling gpio_led_init+0x0/0xf
Registered led device: rdc:dmz
initcall gpio_led_init+0x0/0xf returned 0 after 0 msecs
calling ioat_init_module+0x0/0x16
initcall ioat_init_module+0x0/0x16 returned 0 after 0 msecs
calling dca_init+0x0/0xa
initcall dca_init+0x0/0xa returned 0 after 0 msecs
calling virtio_pci_init+0x0/0x3a
initcall virtio_pci_init+0x0/0x3a returned 0 after 0 msecs
calling oprofile_init+0x0/0x47
oprofile: using NMI interrupt.
initcall oprofile_init+0x0/0x47 returned 0 after 0 msecs
calling sysctl_core_init+0x0/0x1e
initcall sysctl_core_init+0x0/0x1e returned 0 after 0 msecs
calling flow_cache_init+0x0/0x139
initcall flow_cache_init+0x0/0x139 returned 0 after 0 msecs
calling llc_init+0x0/0x1b
initcall llc_init+0x0/0x1b returned 0 after 0 msecs
calling snap_init+0x0/0x2a
initcall snap_init+0x0/0x2a returned 0 after 0 msecs
calling xt_init+0x0/0x7e
initcall xt_init+0x0/0x7e returned 0 after 0 msecs
calling tcpudp_mt_init+0x0/0x14
initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 msecs
calling classify_tg_init+0x0/0x14
initcall classify_tg_init+0x0/0x14 returned 0 after 0 msecs
calling dccp_mt_init+0x0/0x45
initcall dccp_mt_init+0x0/0x45 returned 0 after 0 msecs
calling dscp_mt_init+0x0/0x14
initcall dscp_mt_init+0x0/0x14 returned 0 after 0 msecs
calling iprange_mt_init+0x0/0x14
initcall iprange_mt_init+0x0/0x14 returned 0 after 0 msecs
calling pkttype_mt_init+0x0/0x14
initcall pkttype_mt_init+0x0/0x14 returned 0 after 0 msecs
calling sctp_mt_init+0x0/0x14
initcall sctp_mt_init+0x0/0x14 returned 0 after 0 msecs
calling string_mt_init+0x0/0x14
initcall string_mt_init+0x0/0x14 returned 0 after 0 msecs
calling tcpmss_mt_init+0x0/0x14
initcall tcpmss_mt_init+0x0/0x14 returned 0 after 0 msecs
calling sysctl_ipv4_init+0x0/0x3f
initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 1 msecs
calling xfrm4_mode_tunnel_init+0x0/0x14
initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 msecs
calling ipv4_netfilter_init+0x0/0xf
initcall ipv4_netfilter_init+0x0/0xf returned 0 after 0 msecs
calling arp_tables_init+0x0/0x78
arp_tables: (C) 2002 David S. Miller
initcall arp_tables_init+0x0/0x78 returned 0 after 0 msecs
calling arpt_mangle_init+0x0/0xf
initcall arpt_mangle_init+0x0/0xf returned 0 after 0 msecs
calling cubictcp_register+0x0/0x93
TCP cubic registered
initcall cubictcp_register+0x0/0x93 returned 0 after 0 msecs
calling inet6_init+0x0/0x2e4
NET: Registered protocol family 10
initcall inet6_init+0x0/0x2e4 returned 0 after 11 msecs
calling ah6_init+0x0/0x5a
initcall ah6_init+0x0/0x5a returned 0 after 0 msecs
calling esp6_init+0x0/0x5a
initcall esp6_init+0x0/0x5a returned 0 after 0 msecs
calling ipcomp6_init+0x0/0x5a
initcall ipcomp6_init+0x0/0x5a returned 0 after 0 msecs
calling xfrm6_tunnel_init+0x0/0xdb
initcall xfrm6_tunnel_init+0x0/0xdb returned 0 after 0 msecs
calling tunnel6_init+0x0/0x5a
initcall tunnel6_init+0x0/0x5a returned 0 after 0 msecs
calling xfrm6_mode_tunnel_init+0x0/0x14
initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 0 msecs
calling mip6_init+0x0/0xa7
Mobile IPv6
initcall mip6_init+0x0/0xa7 returned 0 after 0 msecs
calling packet_init+0x0/0x39
NET: Registered protocol family 17
initcall packet_init+0x0/0x39 returned 0 after 0 msecs
calling ipsec_pfkey_init+0x0/0x7a
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x7a returned 0 after 0 msecs
calling br_init+0x0/0xa1
Bridge firewalling registered
initcall br_init+0x0/0xa1 returned 0 after 0 msecs
calling lapb_init+0x0/0x7
initcall lapb_init+0x0/0x7 returned 0 after 0 msecs
calling can_init+0x0/0xd1
can: controller area network core (rev 20071116 abi 8)
NET: Registered protocol family 29
initcall can_init+0x0/0xd1 returned 0 after 0 msecs
calling sco_init+0x0/0xc2
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
initcall sco_init+0x0/0xc2 returned 0 after 0 msecs
calling init_sunrpc+0x0/0x53
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
initcall init_sunrpc+0x0/0x53 returned 0 after 1 msecs
calling init_rpcsec_gss+0x0/0x2e
initcall init_rpcsec_gss+0x0/0x2e returned 0 after 0 msecs
calling init_kerberos_module+0x0/0x26
initcall init_kerberos_module+0x0/0x26 returned 0 after 0 msecs
calling lane_module_init+0x0/0x4f
lec.c: Jul 21 2008 11:15:34 initialized
initcall lane_module_init+0x0/0x4f returned 0 after 0 msecs
calling econet_proto_init+0x0/0x186
NET: Registered protocol family 19
initcall econet_proto_init+0x0/0x186 returned 0 after 0 msecs
calling sctp_init+0x0/0x697
SCTP: Hash tables configured (established 26214 bind 29127)
sctp_init_sock(sk: f720c000)
initcall sctp_init+0x0/0x697 returned 0 after 9 msecs
calling powernowk8_init+0x0/0x6e
initcall powernowk8_init+0x0/0x6e returned -19 after 0 msecs
calling hpet_insert_resource+0x0/0x1e
initcall hpet_insert_resource+0x0/0x1e returned 0 after 0 msecs
calling lapic_insert_resource+0x0/0x44
initcall lapic_insert_resource+0x0/0x44 returned 0 after 0 msecs
calling init_lapic_nmi_sysfs+0x0/0x33
initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 msecs
=============================================================================
BUG skbuff_head_cache: Poison overwritten
-----------------------------------------------------------------------------
INFO: 0xf7ccc100-0xf7ccc103. First byte 0x0 instead of 0x6b
INFO: Allocated in __alloc_skb+0x30/0x10e age=1 cpu=1 pid=1
INFO: Freed in __kfree_skb+0x63/0x66 age=1 cpu=0 pid=0
INFO: Slab 0xc1c34ca0 objects=16 used=1 fp=0xf7ccc100 flags=0x400000c3
INFO: Object 0xf7ccc100 @offset=256 fp=0xf7ccc200
Bytes b4 0xf7ccc0f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Object 0xf7ccc100: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk
Object 0xf7ccc110: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc120: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc130: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc140: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc150: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc160: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc170: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc180: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc190: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object 0xf7ccc1a0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk�
Redzone 0xf7ccc1b0: bb bb bb bb ����
Padding 0xf7ccc1d8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 0xf7ccc1e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 0xf7ccc1f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
Pid: 1, comm: swapper Not tainted 2.6.26-tip #3261
[<c01673ad>] print_trailer+0xd1/0xd9
[<c0167428>] check_bytes_and_report+0x73/0x8f
[<c0167664>] check_object+0xa5/0x15a
[<c016824c>] __slab_alloc+0x2fb/0x3c8
[<c0168364>] kmem_cache_alloc+0x4b/0xa8
[<c0497376>] ? __alloc_skb+0x30/0x10e
[<c0497376>] ? __alloc_skb+0x30/0x10e
[<c0497376>] __alloc_skb+0x30/0x10e
[<c04a6678>] alloc_skb+0xc/0xe
[<c04a6ce5>] find_skb+0x28/0x66
[<c04a6f5f>] netpoll_send_udp+0x2b/0x1cf
[<c058800f>] ? _spin_lock_irqsave+0x4b/0x55
[<c03db399>] write_msg+0x79/0xac
[<c03db320>] ? write_msg+0x0/0xac
[<c0122f96>] __call_console_drivers+0x56/0x63
[<c0122ffa>] _call_console_drivers+0x57/0x5b
[<c0123386>] release_console_sem+0x112/0x1a5
[<c01238f3>] vprintk+0x344/0x35e
next prev parent reply other threads:[~2008-07-21 11:14 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-17 21:42 [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten Ingo Molnar
2008-07-17 21:45 ` David Miller
2008-07-17 22:06 ` Ingo Molnar
2008-07-17 22:09 ` David Miller
2008-07-17 22:43 ` Ingo Molnar
2008-07-17 23:15 ` Vegard Nossum
2008-07-17 23:35 ` Vegard Nossum
2008-07-17 23:52 ` Ingo Molnar
2008-07-18 0:01 ` Ingo Molnar
2008-07-18 0:05 ` Vegard Nossum
2008-07-18 0:16 ` Ingo Molnar
2008-07-18 2:13 ` David Miller
2008-07-18 2:03 ` David Miller
2008-07-18 7:03 ` Vegard Nossum
2008-07-18 7:12 ` David Miller
2008-07-18 9:05 ` Ingo Molnar
2008-07-18 19:10 ` [bug] Attempt to release alive inet socket f6fac040 Ingo Molnar
2008-07-18 19:55 ` Ingo Molnar
2008-07-17 23:27 ` [bug, netconsole, SLUB] BUG skbuff_head_cache: Poison overwritten Vegard Nossum
2008-07-17 23:56 ` Ingo Molnar
2008-07-21 11:41 ` Vegard Nossum
2008-07-18 5:46 ` Evgeniy Polyakov
2008-07-18 9:02 ` Pekka Enberg
2008-07-18 9:09 ` Ingo Molnar
2008-07-18 9:15 ` Pekka Enberg
2008-07-18 10:16 ` Evgeniy Polyakov
2008-07-18 14:44 ` Pekka Enberg
2008-07-18 14:48 ` Christoph Lameter
2008-07-18 16:07 ` Evgeniy Polyakov
2008-07-18 9:00 ` Pekka J Enberg
2008-07-18 9:11 ` Ingo Molnar
2008-07-18 9:16 ` Pekka Enberg
2008-07-18 13:54 ` Christoph Lameter
2008-07-21 9:41 ` Ingo Molnar
2008-07-21 9:52 ` Pekka Enberg
2008-07-21 9:52 ` Pekka Enberg
2008-07-21 10:06 ` Evgeniy Polyakov
2008-07-21 10:50 ` Ingo Molnar
2008-07-21 11:03 ` Vegard Nossum
2008-07-21 11:13 ` Ingo Molnar [this message]
2008-07-21 16:19 ` Christoph Lameter
2008-07-21 20:23 ` Vegard Nossum
2008-07-21 11:25 ` Evgeniy Polyakov
2008-07-21 11:55 ` Ingo Molnar
2008-07-21 12:57 ` Evgeniy Polyakov
2008-07-21 14:01 ` Ingo Molnar
2008-07-21 19:21 ` Ingo Molnar
2008-07-21 21:24 ` Evgeniy Polyakov
2008-07-21 23:33 ` David Miller
2008-07-22 7:50 ` Ingo Molnar
2008-07-22 13:34 ` Ingo Molnar
2008-07-23 22:31 ` David Miller
2008-07-23 22:40 ` Jeff Kirsher
2008-07-21 16:22 ` Christoph Lameter
2008-07-21 19:57 ` Evgeniy Polyakov
2008-07-21 20:05 ` Ingo Molnar
2008-07-21 20:22 ` Vegard Nossum
2008-07-18 13:55 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080721111322.GA17251@elte.hu \
--to=mingo@elte.hu \
--cc=cl@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=penberg@cs.helsinki.fi \
--cc=rjw@sisk.pl \
--cc=vegard.nossum@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.