From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH] x86: mach-bigsmp to bigsmp
Date: Fri, 25 Jul 2008 02:17:21 -0700 [thread overview]
Message-ID: <200807250217.21831.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200807250216.37616.yhlu.kernel@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/mach-generic/bigsmp.c | 6 -
include/asm-x86/bigsmp/apic.h | 144 +++++++++++++++++++++++++++++
include/asm-x86/bigsmp/apicdef.h | 13 ++
include/asm-x86/bigsmp/ipi.h | 25 +++++
include/asm-x86/mach-bigsmp/mach_apic.h | 144 -----------------------------
include/asm-x86/mach-bigsmp/mach_apicdef.h | 13 --
include/asm-x86/mach-bigsmp/mach_ipi.h | 25 -----
7 files changed, 185 insertions(+), 185 deletions(-)
Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/bigsmp.c
+++ linux-2.6/arch/x86/mach-generic/bigsmp.c
@@ -12,10 +12,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dmi.h>
-#include <asm/mach-bigsmp/mach_apicdef.h>
+#include <asm/bigsmp/apicdef.h>
#include <linux/smp.h>
-#include <asm/mach-bigsmp/mach_apic.h>
-#include <asm/mach-bigsmp/mach_ipi.h>
+#include <asm/bigsmp/apic.h>
+#include <asm/bigsmp/ipi.h>
#include <asm/mach-default/mach_mpparse.h>
static int dmi_bigsmp; /* can be set by dmi scanners */
Index: linux-2.6/include/asm-x86/bigsmp/apic.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/bigsmp/apic.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+ return (1);
+}
+
+/* Round robin the irqs amoung the online cpus */
+static inline cpumask_t target_cpus(void)
+{
+ static unsigned long cpu = NR_CPUS;
+ do {
+ if (cpu >= NR_CPUS)
+ cpu = first_cpu(cpu_online_map);
+ else
+ cpu = next_cpu(cpu, cpu_online_map);
+ } while (cpu >= NR_CPUS);
+ return cpumask_of_cpu(cpu);
+}
+
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL 0
+#define TARGET_CPUS (target_cpus())
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE (dest_Fixed)
+#define INT_DEST_MODE (0) /* phys delivery to target proc */
+#define NO_BALANCE_IRQ (0)
+#define WAKE_SECONDARY_VIA_INIT
+
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return (0);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+ return (1);
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+ unsigned long val, id;
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ id = xapic_phys_to_log_apicid(cpu);
+ val |= SET_APIC_LOGICAL_ID(id);
+ return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+ int cpu = smp_processor_id();
+
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = calculate_ldr(cpu);
+ apic_write(APIC_LDR, val);
+}
+
+static inline void setup_apic_routing(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ "Physflat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return (0);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < NR_CPUS)
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+ return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+ return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0xFFL);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return (1);
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int cpu;
+ int apicid;
+
+ cpu = first_cpu(cpumask);
+ apicid = cpu_to_logical_apicid(cpu);
+ return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
Index: linux-2.6/include/asm-x86/bigsmp/apicdef.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/bigsmp/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define APIC_ID_MASK (0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (((x)>>24)&0xFF);
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
Index: linux-2.6/include/asm-x86/bigsmp/ipi.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/bigsmp/ipi.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+ send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
Index: linux-2.6/include/asm-x86/mach-bigsmp/mach_apic.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-bigsmp/mach_apic.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
- return (1);
-}
-
-/* Round robin the irqs amoung the online cpus */
-static inline cpumask_t target_cpus(void)
-{
- static unsigned long cpu = NR_CPUS;
- do {
- if (cpu >= NR_CPUS)
- cpu = first_cpu(cpu_online_map);
- else
- cpu = next_cpu(cpu, cpu_online_map);
- } while (cpu >= NR_CPUS);
- return cpumask_of_cpu(cpu);
-}
-
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL 0
-#define TARGET_CPUS (target_cpus())
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE (dest_Fixed)
-#define INT_DEST_MODE (0) /* phys delivery to target proc */
-#define NO_BALANCE_IRQ (0)
-#define WAKE_SECONDARY_VIA_INIT
-
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return (0);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
- return (1);
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
- unsigned long val, id;
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- id = xapic_phys_to_log_apicid(cpu);
- val |= SET_APIC_LOGICAL_ID(id);
- return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
- unsigned long val;
- int cpu = smp_processor_id();
-
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = calculate_ldr(cpu);
- apic_write(APIC_LDR, val);
-}
-
-static inline void setup_apic_routing(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- "Physflat", nr_ioapics);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
- return (0);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < NR_CPUS)
- return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
- return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
- return physid_mask_of_physid(phys_apicid);
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- return physids_promote(0xFFL);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return (1);
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- int cpu;
- int apicid;
-
- cpu = first_cpu(cpumask);
- apicid = cpu_to_logical_apicid(cpu);
- return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
Index: linux-2.6/include/asm-x86/mach-bigsmp/mach_apicdef.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-bigsmp/mach_apicdef.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define APIC_ID_MASK (0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0xFF);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif
Index: linux-2.6/include/asm-x86/mach-bigsmp/mach_ipi.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-bigsmp/mach_ipi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
-
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
next prev parent reply other threads:[~2008-07-25 9:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-25 9:14 [PATCH] x86: add setup_ioapic_ids for numaq in x86_quirks Yinghai Lu
[not found] ` <200807250215.54393.yhlu.kernel@gmail.com>
[not found] ` <200807250216.37616.yhlu.kernel@gmail.com>
2008-07-25 9:17 ` Yinghai Lu [this message]
2008-07-25 9:17 ` [PATCH] x86: mach_es7000 to es7000 Yinghai Lu
[not found] ` <200807250215.15588.yhlu.kernel@gmail.com>
2008-07-25 9:17 ` [PATCH] x86: mach_summit to summit Yinghai Lu
2008-07-25 9:17 ` [PATCH] x86: mach-numaq to numaq Yinghai Lu
2008-07-26 14:33 ` [PATCH] x86: add setup_ioapic_ids for numaq in x86_quirks Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807250217.21831.yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.