From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] x86: mach_es7000 to es7000
Date: Fri, 25 Jul 2008 02:17:33 -0700 [thread overview]
Message-ID: <200807250217.33855.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200807250215.54393.yhlu.kernel@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
---
arch/x86/es7000/Makefile | 5
arch/x86/es7000/es7000.h | 114 ++++++++++++
arch/x86/es7000/es7000plat.c | 262 +++++++++++++++++++++++++++++
arch/x86/mach-es7000/Makefile | 5
arch/x86/mach-es7000/es7000.h | 114 ------------
arch/x86/mach-es7000/es7000plat.c | 262 -----------------------------
arch/x86/mach-generic/Makefile | 2
include/asm-x86/es7000/apic.h | 194 +++++++++++++++++++++
include/asm-x86/es7000/apicdef.h | 13 +
include/asm-x86/es7000/ipi.h | 24 ++
include/asm-x86/es7000/mpparse.h | 29 +++
include/asm-x86/es7000/wakecpu.h | 59 ++++++
include/asm-x86/mach-es7000/mach_apic.h | 194 ---------------------
include/asm-x86/mach-es7000/mach_apicdef.h | 13 -
include/asm-x86/mach-es7000/mach_ipi.h | 24 --
include/asm-x86/mach-es7000/mach_mpparse.h | 29 ---
include/asm-x86/mach-es7000/mach_wakecpu.h | 59 ------
17 files changed, 701 insertions(+), 701 deletions(-)
Index: linux-2.6/arch/x86/es7000/Makefile
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/es7000/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-$(CONFIG_X86_ES7000) := es7000plat.o
Index: linux-2.6/arch/x86/es7000/es7000.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/es7000/es7000.h
@@ -0,0 +1,114 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ * Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS 0
+#define ES7000_CLASSIC 1
+#define ES7000_ZORRO 2
+
+
+#define MIP_REG 1
+#define MIP_PSAI_REG 4
+
+#define MIP_BUSY 1
+#define MIP_SPIN 0xf0000
+#define MIP_VALID 0x0100000000000000ULL
+#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff)
+
+#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
+
+struct mip_reg_info {
+ unsigned long long mip_info;
+ unsigned long long delivery_info;
+ unsigned long long host_reg;
+ unsigned long long mip_reg;
+};
+
+struct part_info {
+ unsigned char type;
+ unsigned char length;
+ unsigned char part_id;
+ unsigned char apic_mode;
+ unsigned long snum;
+ char ptype[16];
+ char sname[64];
+ char pname[64];
+};
+
+struct psai {
+ unsigned long long entry_type;
+ unsigned long long addr;
+ unsigned long long bep_addr;
+};
+
+struct es7000_mem_info {
+ unsigned char type;
+ unsigned char length;
+ unsigned char resv[6];
+ unsigned long long start;
+ unsigned long long size;
+};
+
+struct es7000_oem_table {
+ unsigned long long hdr;
+ struct mip_reg_info mip;
+ struct part_info pif;
+ struct es7000_mem_info shm;
+ struct psai psai;
+};
+
+#ifdef CONFIG_ACPI
+
+struct oem_table {
+ struct acpi_table_header Header;
+ u32 OEMTableAddr;
+ u32 OEMTableSize;
+};
+
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+#endif
+
+struct mip_reg {
+ unsigned long long off_0;
+ unsigned long long off_8;
+ unsigned long long off_10;
+ unsigned long long off_18;
+ unsigned long long off_20;
+ unsigned long long off_28;
+ unsigned long long off_30;
+ unsigned long long off_38;
+};
+
+#define MIP_SW_APIC 0x1020b
+#define MIP_FUNC(VALUE) (VALUE & 0xff)
+
+extern int parse_unisys_oem (char *oemptr);
+extern void setup_unisys(void);
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+extern void es7000_sw_apic(void);
Index: linux-2.6/arch/x86/es7000/es7000plat.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/es7000/es7000plat.c
@@ -0,0 +1,262 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ * Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/apicdef.h>
+#include "es7000.h"
+#include <mach_mpparse.h>
+
+/*
+ * ES7000 Globals
+ */
+
+static volatile unsigned long *psai = NULL;
+static struct mip_reg *mip_reg;
+static struct mip_reg *host_reg;
+static int mip_port;
+static unsigned long mip_addr, host_addr;
+
+int es7000_plat;
+
+/*
+ * GSI override for ES7000 platforms.
+ */
+
+static unsigned int base;
+
+static int
+es7000_rename_gsi(int ioapic, int gsi)
+{
+ if (es7000_plat == ES7000_ZORRO)
+ return gsi;
+
+ if (!base) {
+ int i;
+ for (i = 0; i < nr_ioapics; i++)
+ base += nr_ioapic_registers[i];
+ }
+
+ if (!ioapic && (gsi < 16))
+ gsi += base;
+ return gsi;
+}
+
+void __init
+setup_unisys(void)
+{
+ /*
+ * Determine the generation of the ES7000 currently running.
+ *
+ * es7000_plat = 1 if the machine is a 5xx ES7000 box
+ * es7000_plat = 2 if the machine is a x86_64 ES7000 box
+ *
+ */
+ if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
+ es7000_plat = ES7000_ZORRO;
+ else
+ es7000_plat = ES7000_CLASSIC;
+ ioapic_renumber_irq = es7000_rename_gsi;
+}
+
+/*
+ * Parse the OEM Table
+ */
+
+int __init
+parse_unisys_oem (char *oemptr)
+{
+ int i;
+ int success = 0;
+ unsigned char type, size;
+ unsigned long val;
+ char *tp = NULL;
+ struct psai *psaip = NULL;
+ struct mip_reg_info *mi;
+ struct mip_reg *host, *mip;
+
+ tp = oemptr;
+
+ tp += 8;
+
+ for (i=0; i <= 6; i++) {
+ type = *tp++;
+ size = *tp++;
+ tp -= 2;
+ switch (type) {
+ case MIP_REG:
+ mi = (struct mip_reg_info *)tp;
+ val = MIP_RD_LO(mi->host_reg);
+ host_addr = val;
+ host = (struct mip_reg *)val;
+ host_reg = __va(host);
+ val = MIP_RD_LO(mi->mip_reg);
+ mip_port = MIP_PORT(mi->mip_info);
+ mip_addr = val;
+ mip = (struct mip_reg *)val;
+ mip_reg = __va(mip);
+ pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+ (unsigned long)host_reg);
+ pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+ (unsigned long)mip_reg);
+ success++;
+ break;
+ case MIP_PSAI_REG:
+ psaip = (struct psai *)tp;
+ if (tp != NULL) {
+ if (psaip->addr)
+ psai = __va(psaip->addr);
+ else
+ psai = NULL;
+ success++;
+ }
+ break;
+ default:
+ break;
+ }
+ tp += size;
+ }
+
+ if (success < 2) {
+ es7000_plat = NON_UNISYS;
+ } else
+ setup_unisys();
+ return es7000_plat;
+}
+
+#ifdef CONFIG_ACPI
+int __init
+find_unisys_acpi_oem_table(unsigned long *oem_addr)
+{
+ struct acpi_table_header *header = NULL;
+ int i = 0;
+ while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+ if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
+ struct oem_table *t = (struct oem_table *)header;
+ *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
+ t->OEMTableSize);
+ return 0;
+ }
+ }
+ return -1;
+}
+#endif
+
+static void
+es7000_spin(int n)
+{
+ int i = 0;
+
+ while (i++ < n)
+ rep_nop();
+}
+
+static int __init
+es7000_mip_write(struct mip_reg *mip_reg)
+{
+ int status = 0;
+ int spin;
+
+ spin = MIP_SPIN;
+ while (((unsigned long long)host_reg->off_38 &
+ (unsigned long long)MIP_VALID) != 0) {
+ if (--spin <= 0) {
+ printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+ return -1;
+ }
+ es7000_spin(MIP_SPIN);
+ }
+
+ memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
+ outb(1, mip_port);
+
+ spin = MIP_SPIN;
+
+ while (((unsigned long long)mip_reg->off_38 &
+ (unsigned long long)MIP_VALID) == 0) {
+ if (--spin <= 0) {
+ printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
+ return -1;
+ }
+ es7000_spin(MIP_SPIN);
+ }
+
+ status = ((unsigned long long)mip_reg->off_0 &
+ (unsigned long long)0xffff0000000000ULL) >> 48;
+ mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
+ (unsigned long long)~MIP_VALID);
+ return status;
+}
+
+int
+es7000_start_cpu(int cpu, unsigned long eip)
+{
+ unsigned long vect = 0, psaival = 0;
+
+ if (psai == NULL)
+ return -1;
+
+ vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+ psaival = (0x1000000 | vect | cpu);
+
+ while (*psai & 0x1000000)
+ ;
+
+ *psai = psaival;
+
+ return 0;
+
+}
+
+void __init
+es7000_sw_apic(void)
+{
+ if (es7000_plat) {
+ int mip_status;
+ struct mip_reg es7000_mip_reg;
+
+ printk("ES7000: Enabling APIC mode.\n");
+ memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+ es7000_mip_reg.off_0 = MIP_SW_APIC;
+ es7000_mip_reg.off_38 = (MIP_VALID);
+ while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+ printk("es7000_sw_apic: command failed, status = %x\n",
+ mip_status);
+ return;
+ }
+}
Index: linux-2.6/arch/x86/mach-es7000/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/mach-es7000/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_X86_ES7000) := es7000plat.o
Index: linux-2.6/arch/x86/mach-es7000/es7000.h
===================================================================
--- linux-2.6.orig/arch/x86/mach-es7000/es7000.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- * Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS 0
-#define ES7000_CLASSIC 1
-#define ES7000_ZORRO 2
-
-
-#define MIP_REG 1
-#define MIP_PSAI_REG 4
-
-#define MIP_BUSY 1
-#define MIP_SPIN 0xf0000
-#define MIP_VALID 0x0100000000000000ULL
-#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff)
-
-#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
-
-struct mip_reg_info {
- unsigned long long mip_info;
- unsigned long long delivery_info;
- unsigned long long host_reg;
- unsigned long long mip_reg;
-};
-
-struct part_info {
- unsigned char type;
- unsigned char length;
- unsigned char part_id;
- unsigned char apic_mode;
- unsigned long snum;
- char ptype[16];
- char sname[64];
- char pname[64];
-};
-
-struct psai {
- unsigned long long entry_type;
- unsigned long long addr;
- unsigned long long bep_addr;
-};
-
-struct es7000_mem_info {
- unsigned char type;
- unsigned char length;
- unsigned char resv[6];
- unsigned long long start;
- unsigned long long size;
-};
-
-struct es7000_oem_table {
- unsigned long long hdr;
- struct mip_reg_info mip;
- struct part_info pif;
- struct es7000_mem_info shm;
- struct psai psai;
-};
-
-#ifdef CONFIG_ACPI
-
-struct oem_table {
- struct acpi_table_header Header;
- u32 OEMTableAddr;
- u32 OEMTableSize;
-};
-
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-#endif
-
-struct mip_reg {
- unsigned long long off_0;
- unsigned long long off_8;
- unsigned long long off_10;
- unsigned long long off_18;
- unsigned long long off_20;
- unsigned long long off_28;
- unsigned long long off_30;
- unsigned long long off_38;
-};
-
-#define MIP_SW_APIC 0x1020b
-#define MIP_FUNC(VALUE) (VALUE & 0xff)
-
-extern int parse_unisys_oem (char *oemptr);
-extern void setup_unisys(void);
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-extern void es7000_sw_apic(void);
Index: linux-2.6/arch/x86/mach-es7000/es7000plat.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-es7000/es7000plat.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- * Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <asm/io.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/apicdef.h>
-#include "es7000.h"
-#include <mach_mpparse.h>
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long *psai = NULL;
-static struct mip_reg *mip_reg;
-static struct mip_reg *host_reg;
-static int mip_port;
-static unsigned long mip_addr, host_addr;
-
-int es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-static unsigned int base;
-
-static int
-es7000_rename_gsi(int ioapic, int gsi)
-{
- if (es7000_plat == ES7000_ZORRO)
- return gsi;
-
- if (!base) {
- int i;
- for (i = 0; i < nr_ioapics; i++)
- base += nr_ioapic_registers[i];
- }
-
- if (!ioapic && (gsi < 16))
- gsi += base;
- return gsi;
-}
-
-void __init
-setup_unisys(void)
-{
- /*
- * Determine the generation of the ES7000 currently running.
- *
- * es7000_plat = 1 if the machine is a 5xx ES7000 box
- * es7000_plat = 2 if the machine is a x86_64 ES7000 box
- *
- */
- if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
- es7000_plat = ES7000_ZORRO;
- else
- es7000_plat = ES7000_CLASSIC;
- ioapic_renumber_irq = es7000_rename_gsi;
-}
-
-/*
- * Parse the OEM Table
- */
-
-int __init
-parse_unisys_oem (char *oemptr)
-{
- int i;
- int success = 0;
- unsigned char type, size;
- unsigned long val;
- char *tp = NULL;
- struct psai *psaip = NULL;
- struct mip_reg_info *mi;
- struct mip_reg *host, *mip;
-
- tp = oemptr;
-
- tp += 8;
-
- for (i=0; i <= 6; i++) {
- type = *tp++;
- size = *tp++;
- tp -= 2;
- switch (type) {
- case MIP_REG:
- mi = (struct mip_reg_info *)tp;
- val = MIP_RD_LO(mi->host_reg);
- host_addr = val;
- host = (struct mip_reg *)val;
- host_reg = __va(host);
- val = MIP_RD_LO(mi->mip_reg);
- mip_port = MIP_PORT(mi->mip_info);
- mip_addr = val;
- mip = (struct mip_reg *)val;
- mip_reg = __va(mip);
- pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
- (unsigned long)host_reg);
- pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
- (unsigned long)mip_reg);
- success++;
- break;
- case MIP_PSAI_REG:
- psaip = (struct psai *)tp;
- if (tp != NULL) {
- if (psaip->addr)
- psai = __va(psaip->addr);
- else
- psai = NULL;
- success++;
- }
- break;
- default:
- break;
- }
- tp += size;
- }
-
- if (success < 2) {
- es7000_plat = NON_UNISYS;
- } else
- setup_unisys();
- return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-int __init
-find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
- struct acpi_table_header *header = NULL;
- int i = 0;
- while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
- if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
- struct oem_table *t = (struct oem_table *)header;
- *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
- t->OEMTableSize);
- return 0;
- }
- }
- return -1;
-}
-#endif
-
-static void
-es7000_spin(int n)
-{
- int i = 0;
-
- while (i++ < n)
- rep_nop();
-}
-
-static int __init
-es7000_mip_write(struct mip_reg *mip_reg)
-{
- int status = 0;
- int spin;
-
- spin = MIP_SPIN;
- while (((unsigned long long)host_reg->off_38 &
- (unsigned long long)MIP_VALID) != 0) {
- if (--spin <= 0) {
- printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
- return -1;
- }
- es7000_spin(MIP_SPIN);
- }
-
- memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
- outb(1, mip_port);
-
- spin = MIP_SPIN;
-
- while (((unsigned long long)mip_reg->off_38 &
- (unsigned long long)MIP_VALID) == 0) {
- if (--spin <= 0) {
- printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
- return -1;
- }
- es7000_spin(MIP_SPIN);
- }
-
- status = ((unsigned long long)mip_reg->off_0 &
- (unsigned long long)0xffff0000000000ULL) >> 48;
- mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
- (unsigned long long)~MIP_VALID);
- return status;
-}
-
-int
-es7000_start_cpu(int cpu, unsigned long eip)
-{
- unsigned long vect = 0, psaival = 0;
-
- if (psai == NULL)
- return -1;
-
- vect = ((unsigned long)__pa(eip)/0x1000) << 16;
- psaival = (0x1000000 | vect | cpu);
-
- while (*psai & 0x1000000)
- ;
-
- *psai = psaival;
-
- return 0;
-
-}
-
-void __init
-es7000_sw_apic(void)
-{
- if (es7000_plat) {
- int mip_status;
- struct mip_reg es7000_mip_reg;
-
- printk("ES7000: Enabling APIC mode.\n");
- memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
- es7000_mip_reg.off_0 = MIP_SW_APIC;
- es7000_mip_reg.off_38 = (MIP_VALID);
- while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
- printk("es7000_sw_apic: command failed, status = %x\n",
- mip_status);
- return;
- }
-}
Index: linux-2.6/arch/x86/mach-generic/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/Makefile
+++ linux-2.6/arch/x86/mach-generic/Makefile
@@ -9,4 +9,4 @@ obj-$(CONFIG_X86_NUMAQ) += numaq.o
obj-$(CONFIG_X86_SUMMIT) += summit.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp.o
obj-$(CONFIG_X86_ES7000) += es7000.o
-obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/
+obj-$(CONFIG_X86_ES7000) += ../../x86/es7000/
Index: linux-2.6/include/asm-x86/es7000/apic.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/es7000/apic.h
@@ -0,0 +1,194 @@
+#ifndef __ASM_ES7000_APIC_H
+#define __ASM_ES7000_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+ return (1);
+}
+
+static inline cpumask_t target_cpus(void)
+{
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+ return CPU_MASK_ALL;
+#else
+ return cpumask_of_cpu(smp_processor_id());
+#endif
+}
+#define TARGET_CPUS (target_cpus())
+
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE (dest_LowestPrio)
+#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
+#define NO_BALANCE_IRQ (1)
+#undef WAKE_SECONDARY_VIA_INIT
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE (dest_Fixed)
+#define INT_DEST_MODE (0) /* phys delivery to target procs */
+#define NO_BALANCE_IRQ (0)
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL 0x0
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return 0;
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+ unsigned long id;
+ id = xapic_phys_to_log_apicid(cpu);
+ return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+ int cpu = smp_processor_id();
+
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = calculate_ldr(cpu);
+ apic_write(APIC_LDR, val);
+}
+
+#ifndef CONFIG_X86_GENERICARCH
+extern void enable_apic_mode(void);
+#endif
+
+extern int apic_version [MAX_APICS];
+static inline void setup_apic_routing(void)
+{
+ int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+ printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
+ (apic_version[apic] == 0x14) ?
+ "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return 0;
+}
+
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (!mps_cpu)
+ return boot_cpu_physical_apicid;
+ else if (mps_cpu < NR_CPUS)
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+ else
+ return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+ static int id = 0;
+ physid_mask_t mask;
+ mask = physid_mask_of_physid(id);
+ ++id;
+ return mask;
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return (int)cpu_2_logical_apicid[cpu];
+#else
+ return logical_smp_processor_id();
+#endif
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0xff);
+}
+
+
+static inline void setup_portio_remap(void)
+{
+}
+
+extern unsigned int boot_cpu_physical_apicid;
+static inline int check_phys_apicid_present(int cpu_physical_apicid)
+{
+ boot_cpu_physical_apicid = read_apic_id();
+ return (1);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int num_bits_set;
+ int cpus_found = 0;
+ int cpu;
+ int apicid;
+
+ num_bits_set = cpus_weight(cpumask);
+ /* Return id to all */
+ if (num_bits_set == NR_CPUS)
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+ return 0xFF;
+#else
+ return cpu_to_logical_apicid(0);
+#endif
+ /*
+ * The cpus in the mask must all be on the apic cluster. If are not
+ * on the same apicid cluster return default value of TARGET_CPUS.
+ */
+ cpu = first_cpu(cpumask);
+ apicid = cpu_to_logical_apicid(cpu);
+ while (cpus_found < num_bits_set) {
+ if (cpu_isset(cpu, cpumask)) {
+ int new_apicid = cpu_to_logical_apicid(cpu);
+ if (apicid_cluster(apicid) !=
+ apicid_cluster(new_apicid)){
+ printk ("%s: Not a valid mask!\n",__FUNCTION__);
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+ return 0xFF;
+#else
+ return cpu_to_logical_apicid(0);
+#endif
+ }
+ apicid = new_apicid;
+ cpus_found++;
+ }
+ cpu++;
+ }
+ return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_ES7000_APIC_H */
Index: linux-2.6/include/asm-x86/es7000/apicdef.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/es7000/apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ES7000_APICDEF_H
+#define __ASM_ES7000_APICDEF_H
+
+#define APIC_ID_MASK (0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (((x)>>24)&0xFF);
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
Index: linux-2.6/include/asm-x86/es7000/ipi.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/es7000/ipi.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_ES7000_IPI_H
+#define __ASM_ES7000_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+ if (!cpus_empty(mask))
+ send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+ send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_ES7000_IPI_H */
Index: linux-2.6/include/asm-x86/es7000/mpparse.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/es7000/mpparse.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_ES7000_MPPARSE_H
+#define __ASM_ES7000_MPPARSE_H
+
+#include <linux/acpi.h>
+
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void setup_unisys(void);
+
+#ifndef CONFIG_X86_GENERICARCH
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+#endif
+
+#ifdef CONFIG_ACPI
+
+static inline int es7000_check_dsdt(void)
+{
+ struct acpi_table_header header;
+
+ if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+ !strncmp(header.oem_id, "UNISYS", 6))
+ return 1;
+ return 0;
+}
+#endif
+
+#endif /* __ASM_MACH_MPPARSE_H */
Index: linux-2.6/include/asm-x86/es7000/wakecpu.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-x86/es7000/wakecpu.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_ES7000_WAKECPU_H
+#define __ASM_ES7000_WAKECPU_H
+
+/*
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_MIP
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+static inline int
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+ int boot_error = 0;
+ boot_error = es7000_start_cpu(phys_apicid, start_eip);
+ return boot_error;
+}
+#endif
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+#ifdef WAKE_SECONDARY_VIA_INIT
+ while (!atomic_read(deassert))
+ cpu_relax();
+#endif
+ return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
Index: linux-2.6/include/asm-x86/mach-es7000/mach_apic.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-es7000/mach_apic.h
+++ /dev/null
@@ -1,194 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
- return (1);
-}
-
-static inline cpumask_t target_cpus(void)
-{
-#if defined CONFIG_ES7000_CLUSTERED_APIC
- return CPU_MASK_ALL;
-#else
- return cpumask_of_cpu(smp_processor_id());
-#endif
-}
-#define TARGET_CPUS (target_cpus())
-
-#if defined CONFIG_ES7000_CLUSTERED_APIC
-#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
-#define NO_BALANCE_IRQ (1)
-#undef WAKE_SECONDARY_VIA_INIT
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE (dest_Fixed)
-#define INT_DEST_MODE (0) /* phys delivery to target procs */
-#define NO_BALANCE_IRQ (0)
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL 0x0
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return 0;
-}
-static inline unsigned long check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline unsigned long calculate_ldr(int cpu)
-{
- unsigned long id;
- id = xapic_phys_to_log_apicid(cpu);
- return (SET_APIC_LOGICAL_ID(id));
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
- unsigned long val;
- int cpu = smp_processor_id();
-
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = calculate_ldr(cpu);
- apic_write(APIC_LDR, val);
-}
-
-#ifndef CONFIG_X86_GENERICARCH
-extern void enable_apic_mode(void);
-#endif
-
-extern int apic_version [MAX_APICS];
-static inline void setup_apic_routing(void)
-{
- int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
- printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
- (apic_version[apic] == 0x14) ?
- "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
- return 0;
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return 0;
-}
-
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (!mps_cpu)
- return boot_cpu_physical_apicid;
- else if (mps_cpu < NR_CPUS)
- return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
- static int id = 0;
- physid_mask_t mask;
- mask = physid_mask_of_physid(id);
- ++id;
- return mask;
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return (int)cpu_2_logical_apicid[cpu];
-#else
- return logical_smp_processor_id();
-#endif
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- return physids_promote(0xff);
-}
-
-
-static inline void setup_portio_remap(void)
-{
-}
-
-extern unsigned int boot_cpu_physical_apicid;
-static inline int check_phys_apicid_present(int cpu_physical_apicid)
-{
- boot_cpu_physical_apicid = read_apic_id();
- return (1);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- int num_bits_set;
- int cpus_found = 0;
- int cpu;
- int apicid;
-
- num_bits_set = cpus_weight(cpumask);
- /* Return id to all */
- if (num_bits_set == NR_CPUS)
-#if defined CONFIG_ES7000_CLUSTERED_APIC
- return 0xFF;
-#else
- return cpu_to_logical_apicid(0);
-#endif
- /*
- * The cpus in the mask must all be on the apic cluster. If are not
- * on the same apicid cluster return default value of TARGET_CPUS.
- */
- cpu = first_cpu(cpumask);
- apicid = cpu_to_logical_apicid(cpu);
- while (cpus_found < num_bits_set) {
- if (cpu_isset(cpu, cpumask)) {
- int new_apicid = cpu_to_logical_apicid(cpu);
- if (apicid_cluster(apicid) !=
- apicid_cluster(new_apicid)){
- printk ("%s: Not a valid mask!\n",__FUNCTION__);
-#if defined CONFIG_ES7000_CLUSTERED_APIC
- return 0xFF;
-#else
- return cpu_to_logical_apicid(0);
-#endif
- }
- apicid = new_apicid;
- cpus_found++;
- }
- cpu++;
- }
- return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
Index: linux-2.6/include/asm-x86/mach-es7000/mach_apicdef.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-es7000/mach_apicdef.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-#define APIC_ID_MASK (0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0xFF);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif
Index: linux-2.6/include/asm-x86/mach-es7000/mach_ipi.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-es7000/mach_ipi.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
Index: linux-2.6/include/asm-x86/mach-es7000/mach_mpparse.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-es7000/mach_mpparse.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
-
-#include <linux/acpi.h>
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys(void);
-
-#ifndef CONFIG_X86_GENERICARCH
-extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid);
-#endif
-
-#ifdef CONFIG_ACPI
-
-static inline int es7000_check_dsdt(void)
-{
- struct acpi_table_header header;
-
- if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
- !strncmp(header.oem_id, "UNISYS", 6))
- return 1;
- return 0;
-}
-#endif
-
-#endif /* __ASM_MACH_MPPARSE_H */
Index: linux-2.6/include/asm-x86/mach-es7000/mach_wakecpu.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-es7000/mach_wakecpu.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
-
-/*
- * This file copes with machines that wakeup secondary CPUs by the
- * INIT, INIT, STARTUP sequence.
- */
-
-#ifdef CONFIG_ES7000_CLUSTERED_APIC
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-#ifdef WAKE_SECONDARY_VIA_MIP
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-static inline int
-wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
-{
- int boot_error = 0;
- boot_error = es7000_start_cpu(phys_apicid, start_eip);
- return boot_error;
-}
-#endif
-
-#define TRAMPOLINE_LOW phys_to_virt(0x467)
-#define TRAMPOLINE_HIGH phys_to_virt(0x469)
-
-#define boot_cpu_apicid boot_cpu_physical_apicid
-
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-#ifdef WAKE_SECONDARY_VIA_INIT
- while (!atomic_read(deassert))
- cpu_relax();
-#endif
- return;
-}
-
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-#if APIC_DEBUG
- #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
-#else
- #define inquire_remote_apic(apicid) {}
-#endif
-
-#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 9b30547..520cca0 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -11,12 +11,12 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <asm/mach-es7000/mach_apicdef.h>
+#include <asm/es7000/apicdef.h>
#include <linux/smp.h>
-#include <asm/mach-es7000/mach_apic.h>
-#include <asm/mach-es7000/mach_ipi.h>
-#include <asm/mach-es7000/mach_mpparse.h>
-#include <asm/mach-es7000/mach_wakecpu.h>
+#include <asm/es7000/apic.h>
+#include <asm/es7000/ipi.h>
+#include <asm/es7000/mpparse.h>
+#include <asm/es7000/wakecpu.h>
static int probe_es7000(void)
{
next prev parent reply other threads:[~2008-07-25 9:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-25 9:14 [PATCH] x86: add setup_ioapic_ids for numaq in x86_quirks Yinghai Lu
[not found] ` <200807250215.54393.yhlu.kernel@gmail.com>
[not found] ` <200807250216.37616.yhlu.kernel@gmail.com>
2008-07-25 9:17 ` [PATCH] x86: mach-bigsmp to bigsmp Yinghai Lu
2008-07-25 9:17 ` Yinghai Lu [this message]
[not found] ` <200807250215.15588.yhlu.kernel@gmail.com>
2008-07-25 9:17 ` [PATCH] x86: mach_summit to summit Yinghai Lu
2008-07-25 9:17 ` [PATCH] x86: mach-numaq to numaq Yinghai Lu
2008-07-26 14:33 ` [PATCH] x86: add setup_ioapic_ids for numaq in x86_quirks Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807250217.33855.yhlu.kernel@gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.