From: Alexander Koenig <alex@lisas.de>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] stv0297: QAM256 improvement for TT-C2300 revisited
Date: Thu, 31 Jul 2008 22:47:08 +0200 [thread overview]
Message-ID: <20080731204708.GA869@lisas.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 839 bytes --]
Hi,
last October Hartmut Birr submitted a patch that greatly improves
reception of QAM256 modulated channels on the TT-C2300.
(http://www.linuxtv.org/pipermail/linux-dvb/2007-October/021422.html)
The patch was not applied as there were a few reports that it was
causing problems. However, the end of the thread suggests that some of
these issues were a result of using the patch in combination with
other frequency shifting patches that also tried to address QAM256
issues.
Other issues were reported on different hardware (CableStar), so I
extended the patch to change the demodulation frequency only for
Nexus-CA.
The patch was tested successfully on two TT-C2300 based systems, it
would be great if someone could test whether the patch does hurt
QAM256 reception with CableStar devices or not.
Alexander König
[-- Attachment #2: stv0297-qam256-nexusca-only-fix.diff --]
[-- Type: text/x-diff, Size: 2766 bytes --]
diff -ru v4l-dvb.org/linux/drivers/media/dvb/frontends/stv0297.c v4l-dvb/linux/drivers/media/dvb/frontends/stv0297.c
--- v4l-dvb.org/linux/drivers/media/dvb/frontends/stv0297.c 2008-07-26 18:14:23.000000000 +0200
+++ v4l-dvb/linux/drivers/media/dvb/frontends/stv0297.c 2008-07-26 18:16:38.000000000 +0200
@@ -463,7 +463,9 @@
stv0297_writereg(state, 0x82, 0x0);
/* set initial demodulation frequency */
- stv0297_set_initialdemodfreq(state, 7250);
+ stv0297_set_initialdemodfreq(state,
+ state->config->qam256_reduced_demodfreq &
+ (p->u.qam.modulation == QAM_256) ? 6718 : 7250);
/* setup AGC */
stv0297_writereg_mask(state, 0x43, 0x10, 0x00);
diff -ru v4l-dvb.org/linux/drivers/media/dvb/frontends/stv0297.h v4l-dvb/linux/drivers/media/dvb/frontends/stv0297.h
--- v4l-dvb.org/linux/drivers/media/dvb/frontends/stv0297.h 2008-07-26 18:14:23.000000000 +0200
+++ v4l-dvb/linux/drivers/media/dvb/frontends/stv0297.h 2008-07-26 18:16:38.000000000 +0200
@@ -40,6 +40,11 @@
/* set to 1 if the device requires an i2c STOP during reading */
u8 stop_during_read:1;
+
+ /* set to 1 if the device requires reduced demodulation frequency
+ * for QAM256.
+ */
+ u8 qam256_reduced_demodfreq:1;
};
#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE))
diff -ru v4l-dvb.org/linux/drivers/media/dvb/ttpci/av7110.c v4l-dvb/linux/drivers/media/dvb/ttpci/av7110.c
--- v4l-dvb.org/linux/drivers/media/dvb/ttpci/av7110.c 2008-07-26 18:14:23.000000000 +0200
+++ v4l-dvb/linux/drivers/media/dvb/ttpci/av7110.c 2008-07-26 18:16:38.000000000 +0200
@@ -1874,6 +1874,7 @@
.inittab = nexusca_stv0297_inittab,
.invert = 1,
.stop_during_read = 1,
+ .qam256_reduced_demodfreq = 1,
};
diff -ru v4l-dvb.org/linux/drivers/media/dvb/ttpci/budget-ci.c v4l-dvb/linux/drivers/media/dvb/ttpci/budget-ci.c
--- v4l-dvb.org/linux/drivers/media/dvb/ttpci/budget-ci.c 2008-07-26 18:14:23.000000000 +0200
+++ v4l-dvb/linux/drivers/media/dvb/ttpci/budget-ci.c 2008-07-26 18:16:38.000000000 +0200
@@ -1061,6 +1061,7 @@
.inittab = dvbc_philips_tdm1316l_inittab,
.invert = 0,
.stop_during_read = 1,
+ .qam256_reduced_demodfreq = 0,
};
static struct tda10023_config tda10023_config = {
diff -ru v4l-dvb.org/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c v4l-dvb/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
--- v4l-dvb.org/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c 2008-07-26 18:14:23.000000000 +0200
+++ v4l-dvb/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c 2008-07-26 18:16:38.000000000 +0200
@@ -1572,6 +1572,7 @@
.demod_address = 0x1c,
.inittab = dvbc_philips_tdm1316l_inittab,
.invert = 0,
+ .qam256_reduced_demodfreq = 0,
};
static void frontend_init(struct ttusb* ttusb)
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
reply other threads:[~2008-07-31 20:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080731204708.GA869@lisas.de \
--to=alex@lisas.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.