From: Marcelo Tosatti <mtosatti@redhat.com>
To: Avi Kivity <avi@qumranet.com>
Cc: kvm@vger.kernel.org, Marcelo Tosatti <mtosatti@redhat.com>
Subject: [patch 2/2] KVM: x86: do not execute halted vcpus (v2)
Date: Fri, 01 Aug 2008 20:09:14 -0300 [thread overview]
Message-ID: <20080801231343.763237601@localhost.localdomain> (raw)
In-Reply-To: 20080801230912.013317832@localhost.localdomain
[-- Attachment #1: refactor-loop --]
[-- Type: text/plain, Size: 7279 bytes --]
Offline or uninitialized vcpu's can be executed if requested to perform
userspace work.
Follow Avi's suggestion to handle halted vcpu's in the main loop,
simplifying kvm_emulate_halt(). Introduce a new vcpu->requests bit to
indicate events that promote state from halted to running.
Also standardize vcpu wake sites.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Index: kvm/arch/x86/kvm/x86.c
===================================================================
--- kvm.orig/arch/x86/kvm/x86.c
+++ kvm/arch/x86/kvm/x86.c
@@ -2772,11 +2772,6 @@ int kvm_emulate_halt(struct kvm_vcpu *vc
KVMTRACE_0D(HLT, vcpu, handler);
if (irqchip_in_kernel(vcpu->kvm)) {
vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
- up_read(&vcpu->kvm->slots_lock);
- kvm_vcpu_block(vcpu);
- down_read(&vcpu->kvm->slots_lock);
- if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
- return -EINTR;
return 1;
} else {
vcpu->run->exit_reason = KVM_EXIT_HLT;
@@ -3071,24 +3066,10 @@ static void vapic_exit(struct kvm_vcpu *
up_read(&vcpu->kvm->slots_lock);
}
-static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
int r;
- if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED)) {
- pr_debug("vcpu %d received sipi with vector # %x\n",
- vcpu->vcpu_id, vcpu->arch.sipi_vector);
- kvm_lapic_reset(vcpu);
- r = kvm_x86_ops->vcpu_reset(vcpu);
- if (r)
- return r;
- vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
- }
-
- down_read(&vcpu->kvm->slots_lock);
- vapic_enter(vcpu);
-
-again:
if (vcpu->requests)
if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
kvm_mmu_unload(vcpu);
@@ -3132,15 +3113,6 @@ again:
goto out;
}
- if (signal_pending(current)) {
- local_irq_enable();
- preempt_enable();
- r = -EINTR;
- kvm_run->exit_reason = KVM_EXIT_INTR;
- ++vcpu->stat.signal_exits;
- goto out;
- }
-
if (vcpu->guest_debug.enabled)
kvm_x86_ops->guest_debug_pre(vcpu);
@@ -3201,26 +3173,63 @@ again:
kvm_lapic_sync_from_vapic(vcpu);
r = kvm_x86_ops->handle_exit(kvm_run, vcpu);
+out:
+ return r;
+}
- if (r > 0) {
- if (dm_request_for_irq_injection(vcpu, kvm_run)) {
- r = -EINTR;
- kvm_run->exit_reason = KVM_EXIT_INTR;
- ++vcpu->stat.request_irq_exits;
- goto out;
- }
- if (!need_resched())
- goto again;
+static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ int r;
+
+ if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED)) {
+ printk("vcpu %d received sipi with vector # %x\n",
+ vcpu->vcpu_id, vcpu->arch.sipi_vector);
+ kvm_lapic_reset(vcpu);
+ r = kvm_x86_ops->vcpu_reset(vcpu);
+ if (r)
+ return r;
+ vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
}
-out:
- up_read(&vcpu->kvm->slots_lock);
- if (r > 0) {
- kvm_resched(vcpu);
- down_read(&vcpu->kvm->slots_lock);
- goto again;
+ down_read(&vcpu->kvm->slots_lock);
+ vapic_enter(vcpu);
+
+ r = 1;
+ while (r > 0) {
+ if (kvm_arch_vcpu_runnable(vcpu))
+ r = vcpu_enter_guest(vcpu, kvm_run);
+ else {
+ up_read(&vcpu->kvm->slots_lock);
+ kvm_vcpu_block(vcpu);
+ down_read(&vcpu->kvm->slots_lock);
+ if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+ if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
+ vcpu->arch.mp_state =
+ KVM_MP_STATE_RUNNABLE;
+ if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
+ r = -EINTR;
+ }
+
+ if (r > 0) {
+ if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+ r = -EINTR;
+ kvm_run->exit_reason = KVM_EXIT_INTR;
+ ++vcpu->stat.request_irq_exits;
+ }
+ if (signal_pending(current)) {
+ r = -EINTR;
+ kvm_run->exit_reason = KVM_EXIT_INTR;
+ ++vcpu->stat.signal_exits;
+ }
+ if (need_resched()) {
+ up_read(&vcpu->kvm->slots_lock);
+ kvm_resched(vcpu);
+ down_read(&vcpu->kvm->slots_lock);
+ }
+ }
}
+ up_read(&vcpu->kvm->slots_lock);
post_kvm_run_save(vcpu, kvm_run);
vapic_exit(vcpu);
@@ -3240,6 +3249,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v
if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
kvm_vcpu_block(vcpu);
+ clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
r = -EAGAIN;
goto out;
}
Index: kvm/include/linux/kvm_host.h
===================================================================
--- kvm.orig/include/linux/kvm_host.h
+++ kvm/include/linux/kvm_host.h
@@ -34,6 +34,7 @@
#define KVM_REQ_MMU_RELOAD 3
#define KVM_REQ_TRIPLE_FAULT 4
#define KVM_REQ_PENDING_TIMER 5
+#define KVM_REQ_UNHALT 6
struct kvm_vcpu;
extern struct kmem_cache *kvm_vcpu_cache;
Index: kvm/arch/x86/kvm/i8254.c
===================================================================
--- kvm.orig/arch/x86/kvm/i8254.c
+++ kvm/arch/x86/kvm/i8254.c
@@ -200,10 +200,9 @@ static int __pit_timer_fn(struct kvm_kpi
if (!atomic_inc_and_test(&pt->pending))
set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
- if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
- vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+
+ if (vcpu0 && waitqueue_active(&vcpu0->wq))
wake_up_interruptible(&vcpu0->wq);
- }
pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
pt->scheduled = ktime_to_ns(pt->timer.expires);
Index: kvm/virt/kvm/kvm_main.c
===================================================================
--- kvm.orig/virt/kvm/kvm_main.c
+++ kvm/virt/kvm/kvm_main.c
@@ -980,12 +980,12 @@ void kvm_vcpu_block(struct kvm_vcpu *vcp
for (;;) {
prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
- if (kvm_cpu_has_interrupt(vcpu))
- break;
- if (kvm_cpu_has_pending_timer(vcpu))
- break;
- if (kvm_arch_vcpu_runnable(vcpu))
+ if (kvm_cpu_has_interrupt(vcpu) ||
+ kvm_cpu_has_pending_timer(vcpu) ||
+ kvm_arch_vcpu_runnable(vcpu)) {
+ set_bit(KVM_REQ_UNHALT, &vcpu->requests);
break;
+ }
if (signal_pending(current))
break;
Index: kvm/arch/x86/kvm/lapic.c
===================================================================
--- kvm.orig/arch/x86/kvm/lapic.c
+++ kvm/arch/x86/kvm/lapic.c
@@ -339,13 +339,7 @@ static int __apic_accept_irq(struct kvm_
} else
apic_clear_vector(vector, apic->regs + APIC_TMR);
- if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
- kvm_vcpu_kick(vcpu);
- else if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED) {
- vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
- if (waitqueue_active(&vcpu->wq))
- wake_up_interruptible(&vcpu->wq);
- }
+ kvm_vcpu_kick(vcpu);
result = (orig_irr == 0);
break;
@@ -384,8 +378,7 @@ static int __apic_accept_irq(struct kvm_
if (vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) {
vcpu->arch.sipi_vector = vector;
vcpu->arch.mp_state = KVM_MP_STATE_SIPI_RECEIVED;
- if (waitqueue_active(&vcpu->wq))
- wake_up_interruptible(&vcpu->wq);
+ kvm_vcpu_kick(vcpu);
}
break;
@@ -950,10 +943,9 @@ static int __apic_timer_fn(struct kvm_la
if(!atomic_inc_and_test(&apic->timer.pending))
set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
- if (waitqueue_active(q)) {
- apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+ if (waitqueue_active(q))
wake_up_interruptible(q);
- }
+
if (apic_lvtt_period(apic)) {
result = 1;
apic->timer.dev.expires = ktime_add_ns(
--
next prev parent reply other threads:[~2008-08-01 23:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-01 23:09 [patch 0/2] do not run halted vcpu's Marcelo Tosatti
2008-08-01 23:09 ` [patch 1/2] KVM: x86: set debug registers after "schedulable" section Marcelo Tosatti
2008-08-13 10:46 ` Avi Kivity
2008-08-01 23:09 ` Marcelo Tosatti [this message]
2008-08-13 10:51 ` [patch 2/2] KVM: x86: do not execute halted vcpus (v2) Avi Kivity
2008-08-13 10:53 ` Avi Kivity
2008-08-13 10:44 ` [patch 0/2] do not run halted vcpu's Avi Kivity
2008-08-15 0:19 ` Marcelo Tosatti
2008-08-17 6:31 ` Avi Kivity
2008-08-17 7:41 ` Avi Kivity
2008-08-19 23:07 ` Marcelo Tosatti
2008-08-20 4:04 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080801231343.763237601@localhost.localdomain \
--to=mtosatti@redhat.com \
--cc=avi@qumranet.com \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.