From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] mx31: move freescale's mx31 boards to vendor board dir
Date: Wed, 06 Aug 2008 23:34:17 +0200 [thread overview]
Message-ID: <20080806213417.C695524847@gemini.denx.de> (raw)
In-Reply-To: Your message of "Wed, 06 Aug 2008 23:14:55 +0200." <1218057295-20684-1-git-send-email-plagnioj@jcrosoft.com>
In message <1218057295-20684-1-git-send-email-plagnioj@jcrosoft.com> you wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> Makefile | 6 +++---
> board/{ => freescale}/imx31_litekit/Makefile | 0
> board/{ => freescale}/imx31_litekit/config.mk | 0
> .../{ => freescale}/imx31_litekit/imx31_litekit.c | 0
> .../{ => freescale}/imx31_litekit/lowlevel_init.S | 0
> board/{ => freescale}/imx31_litekit/u-boot.lds | 0
> board/{ => freescale}/imx31_phycore/Makefile | 0
> board/{ => freescale}/imx31_phycore/config.mk | 0
> .../{ => freescale}/imx31_phycore/imx31_phycore.c | 0
> .../{ => freescale}/imx31_phycore/lowlevel_init.S | 0
> board/{ => freescale}/imx31_phycore/u-boot.lds | 0
> board/{ => freescale}/mx31ads/Makefile | 0
> board/{ => freescale}/mx31ads/config.mk | 0
> board/{ => freescale}/mx31ads/lowlevel_init.S | 0
> board/{ => freescale}/mx31ads/mx31ads.c | 0
> board/{ => freescale}/mx31ads/u-boot.lds | 10 +++++-----
> 16 files changed, 8 insertions(+), 8 deletions(-)
> rename board/{ => freescale}/imx31_litekit/Makefile (100%)
> rename board/{ => freescale}/imx31_litekit/config.mk (100%)
> rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%)
> rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%)
> rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%)
> rename board/{ => freescale}/imx31_phycore/Makefile (100%)
> rename board/{ => freescale}/imx31_phycore/config.mk (100%)
> rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%)
> rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%)
> rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%)
> rename board/{ => freescale}/mx31ads/Makefile (100%)
> rename board/{ => freescale}/mx31ads/config.mk (100%)
> rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
> rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
> rename board/{ => freescale}/mx31ads/u-boot.lds (90%)
>
> diff --git a/Makefile b/Makefile
> index 3179c67..30d02b0 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2666,13 +2666,13 @@ apollon_config : unconfig
> @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
>
> imx31_litekit_config : unconfig
> - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
> + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit freescale mx31
>
> imx31_phycore_config : unconfig
> - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
> + @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore freescale mx31
>
> mx31ads_config : unconfig
> - @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
> + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
>
> omap2420h4_config : unconfig
> @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
> diff --git a/board/imx31_litekit/Makefile b/board/freescale/imx31_litekit/Makefile
> similarity index 100%
> rename from board/imx31_litekit/Makefile
> rename to board/freescale/imx31_litekit/Makefile
> diff --git a/board/imx31_litekit/config.mk b/board/freescale/imx31_litekit/config.mk
> similarity index 100%
> rename from board/imx31_litekit/config.mk
> rename to board/freescale/imx31_litekit/config.mk
> diff --git a/board/imx31_litekit/imx31_litekit.c b/board/freescale/imx31_litekit/imx31_litekit.c
> similarity index 100%
> rename from board/imx31_litekit/imx31_litekit.c
> rename to board/freescale/imx31_litekit/imx31_litekit.c
> diff --git a/board/imx31_litekit/lowlevel_init.S b/board/freescale/imx31_litekit/lowlevel_init.S
> similarity index 100%
> rename from board/imx31_litekit/lowlevel_init.S
> rename to board/freescale/imx31_litekit/lowlevel_init.S
> diff --git a/board/imx31_litekit/u-boot.lds b/board/freescale/imx31_litekit/u-boot.lds
> similarity index 100%
> rename from board/imx31_litekit/u-boot.lds
> rename to board/freescale/imx31_litekit/u-boot.lds
> diff --git a/board/imx31_phycore/Makefile b/board/freescale/imx31_phycore/Makefile
> similarity index 100%
> rename from board/imx31_phycore/Makefile
> rename to board/freescale/imx31_phycore/Makefile
> diff --git a/board/imx31_phycore/config.mk b/board/freescale/imx31_phycore/config.mk
> similarity index 100%
> rename from board/imx31_phycore/config.mk
> rename to board/freescale/imx31_phycore/config.mk
> diff --git a/board/imx31_phycore/imx31_phycore.c b/board/freescale/imx31_phycore/imx31_phycore.c
> similarity index 100%
> rename from board/imx31_phycore/imx31_phycore.c
> rename to board/freescale/imx31_phycore/imx31_phycore.c
> diff --git a/board/imx31_phycore/lowlevel_init.S b/board/freescale/imx31_phycore/lowlevel_init.S
> similarity index 100%
> rename from board/imx31_phycore/lowlevel_init.S
> rename to board/freescale/imx31_phycore/lowlevel_init.S
> diff --git a/board/imx31_phycore/u-boot.lds b/board/freescale/imx31_phycore/u-boot.lds
> similarity index 100%
> rename from board/imx31_phycore/u-boot.lds
> rename to board/freescale/imx31_phycore/u-boot.lds
> diff --git a/board/mx31ads/Makefile b/board/freescale/mx31ads/Makefile
> similarity index 100%
> rename from board/mx31ads/Makefile
> rename to board/freescale/mx31ads/Makefile
> diff --git a/board/mx31ads/config.mk b/board/freescale/mx31ads/config.mk
> similarity index 100%
> rename from board/mx31ads/config.mk
> rename to board/freescale/mx31ads/config.mk
> diff --git a/board/mx31ads/lowlevel_init.S b/board/freescale/mx31ads/lowlevel_init.S
> similarity index 100%
> rename from board/mx31ads/lowlevel_init.S
> rename to board/freescale/mx31ads/lowlevel_init.S
> diff --git a/board/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c
> similarity index 100%
> rename from board/mx31ads/mx31ads.c
> rename to board/freescale/mx31ads/mx31ads.c
> diff --git a/board/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
> similarity index 90%
> rename from board/mx31ads/u-boot.lds
> rename to board/freescale/mx31ads/u-boot.lds
> index 49713d4..c379460 100644
> --- a/board/mx31ads/u-boot.lds
> +++ b/board/freescale/mx31ads/u-boot.lds
> @@ -37,11 +37,11 @@ SECTIONS
> /* WARNING - the following is hand-optimized to fit within */
> /* the sector layout of our flash chips! XXX FIXME XXX */
>
> - cpu/arm1136/start.o (.text)
> - board/mx31ads/libmx31ads.a (.text)
> - lib_arm/libarm.a (.text)
> - net/libnet.a (.text)
> - drivers/mtd/libmtd.a (.text)
> + cpu/arm1136/start.o (.text)
> + board/freescale/mx31ads/libmx31ads.a (.text)
> + lib_arm/libarm.a (.text)
> + net/libnet.a (.text)
> + drivers/mtd/libmtd.a (.text)
>
> . = DEFINED(env_offset) ? env_offset : .;
> common/environment.o(.text)
> --
Acked-by: Wolfgang Denk <wd@denx.de>
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
: I've tried (in vi) "g/[a-z]\n[a-z]/s//_/"...but that doesn't
: cut it. Any ideas? (I take it that it may be a two-pass sort of solution).
In the first pass, install perl. :-) Larry Wall <6849@jpl-devvax.JPL.NASA.GOV>
next prev parent reply other threads:[~2008-08-06 21:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-06 21:14 [U-Boot-Users] [PATCH] mx31: move freescale's mx31 boards to vendor board dir Jean-Christophe PLAGNIOL-VILLARD
2008-08-06 21:34 ` Wolfgang Denk [this message]
2008-08-07 6:07 ` Jens Gehrlein
2008-08-07 6:14 ` [U-Boot-Users] [PATCH V2] " Jean-Christophe PLAGNIOL-VILLARD
2008-08-07 6:43 ` Wolfgang Denk
2008-08-07 12:58 ` [U-Boot-Users] [PATCH V3] mx31: move freescale's mx31 board " Jean-Christophe PLAGNIOL-VILLARD
2008-08-07 6:23 ` [U-Boot-Users] [PATCH] mx31: move freescale's mx31 boards " Magnus Lilja
2008-08-07 6:42 ` Wolfgang Denk
2008-08-07 6:43 ` Jens Gehrlein
2008-08-07 6:41 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080806213417.C695524847@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.