From: Jouni Malinen <j@w1.fi>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Subject: [RFC] mac80211/cfg80211: Add BSS configuration options for AP mode
Date: Thu, 7 Aug 2008 16:40:44 +0300 [thread overview]
Message-ID: <20080807134043.GA5138@jm.kir.nu> (raw)
I've been looking at adding some of the missing configuration options to
allow AP mode in mac80211 to remain in sync with hostapd. The patch
below introduces a new cfg80211 command for setting BSS parameters and
adds three initial attributes for this command (CTS protection, short
preamble, short slot time). I would expect CTS protection and short
preamble to work as-is, but short slot time will need some more code to
notify the driver that it needs to change configuration. Based on a
quick test with hostapd, it looks like these parameters can be
successfully passed from there to mac80211.
Could you please take a quick look at whether this looks like a correct
way of introducing new functionality into cfg80211? I'll finish the
short slot time part in mac80211 and post an updated patch as a proper
submission later.
Index: wireless-testing/include/net/cfg80211.h
===================================================================
--- wireless-testing.orig/include/net/cfg80211.h
+++ wireless-testing/include/net/cfg80211.h
@@ -270,6 +270,23 @@ struct mpath_info {
u8 flags;
};
+/**
+ * struct bss_parameters - BSS parameters
+ *
+ * Used to change BSS parameters (mainly for AP mode).
+ *
+ * @use_cts_prot: Whether to use CTS protection
+ * (0 = no, 1 = yes, -1 = do not change)
+ * @use_short_preamble: Whether the use of short preambles is allowed
+ * (0 = no, 1 = yes, -1 = do not change)
+ * @use_short_slot_time: Whether the use of short slot time is allowed
+ * (0 = no, 1 = yes, -1 = do not change)
+ */
+struct bss_parameters {
+ int use_cts_prot;
+ int use_short_preamble;
+ int use_short_slot_time;
+};
/* from net/wireless.h */
struct wiphy;
@@ -322,6 +339,8 @@ struct wiphy;
* @change_station: Modify a given station.
*
* @set_mesh_cfg: set mesh parameters (by now, just mesh id)
+ *
+ * @change_bss: Modify parameters for a given BSS.
*/
struct cfg80211_ops {
int (*add_virtual_intf)(struct wiphy *wiphy, char *name,
@@ -377,6 +396,9 @@ struct cfg80211_ops {
int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo);
+
+ int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
+ struct bss_parameters *params);
};
#endif /* __NET_CFG80211_H */
Index: wireless-testing/net/mac80211/cfg.c
===================================================================
--- wireless-testing.orig/net/mac80211/cfg.c
+++ wireless-testing/net/mac80211/cfg.c
@@ -1055,6 +1055,35 @@ static int ieee80211_dump_mpath(struct w
}
#endif
+static int ieee80211_change_bss(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct bss_parameters *params)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
+
+ if (dev == local->mdev)
+ return -EOPNOTSUPP;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ printk(KERN_DEBUG "JKM-%s: cts=%d preamble=%d slot=%d\n",
+ __func__, params->use_cts_prot, params->use_short_preamble,
+ params->use_short_slot_time);
+ if (params->use_cts_prot >= 0)
+ sdata->bss_conf.use_cts_prot = params->use_cts_prot;
+ if (params->use_short_preamble >= 0)
+ sdata->bss_conf.use_short_preamble =
+ params->use_short_preamble;
+#if 0 /* TODO: need to notify low-level driver */
+ if (params->use_short_slot_time >= 0)
+ sdata->bss_conf.use_short_slot_time =
+ params->use_short_slot_time;
+#endif
+
+ return 0;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -1079,4 +1108,5 @@ struct cfg80211_ops mac80211_config_ops
.get_mpath = ieee80211_get_mpath,
.dump_mpath = ieee80211_dump_mpath,
#endif
+ .change_bss = ieee80211_change_bss,
};
Index: wireless-testing/include/linux/nl80211.h
===================================================================
--- wireless-testing.orig/include/linux/nl80211.h
+++ wireless-testing/include/linux/nl80211.h
@@ -89,6 +89,8 @@
* @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
* or, if no MAC address given, all mesh paths, on the interface identified
* by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ * %NL80211_ATTR_IFINDEX.
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
@@ -127,6 +129,8 @@ enum nl80211_commands {
NL80211_CMD_NEW_MPATH,
NL80211_CMD_DEL_MPATH,
+ NL80211_CMD_SET_BSS,
+
/* add commands here */
/* used to define NL80211_CMD_MAX below */
@@ -134,6 +138,11 @@ enum nl80211_commands {
NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
};
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
/**
* enum nl80211_attrs - nl80211 netlink attributes
@@ -192,6 +201,12 @@ enum nl80211_commands {
* @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
* &enum nl80211_mntr_flags.
*
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ * (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ * (u8, 0 or 1)
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -237,6 +252,10 @@ enum nl80211_attrs {
NL80211_ATTR_KEY_DEFAULT_MGMT,
+ NL80211_ATTR_BSS_CTS_PROT,
+ NL80211_ATTR_BSS_SHORT_PREAMBLE,
+ NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
Index: wireless-testing/net/wireless/nl80211.c
===================================================================
--- wireless-testing.orig/net/wireless/nl80211.c
+++ wireless-testing/net/wireless/nl80211.c
@@ -89,6 +89,10 @@ static struct nla_policy nl80211_policy[
[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
[NL80211_ATTR_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG },
+
+ [NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 },
+ [NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
+ [NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
};
/* message building helper */
@@ -1560,6 +1564,48 @@ static int nl80211_del_mpath(struct sk_b
return err;
}
+static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *drv;
+ int err;
+ struct net_device *dev;
+ struct bss_parameters params;
+
+ memset(¶ms, 0, sizeof(params));
+ /* default to not changing parameters */
+ params.use_cts_prot = -1;
+ params.use_short_preamble = -1;
+ params.use_short_slot_time = -1;
+
+ if (info->attrs[NL80211_ATTR_BSS_CTS_PROT])
+ params.use_cts_prot =
+ nla_get_u8(info->attrs[NL80211_ATTR_BSS_CTS_PROT]);
+ if (info->attrs[NL80211_ATTR_BSS_SHORT_PREAMBLE])
+ params.use_short_preamble =
+ nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_PREAMBLE]);
+ if (info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME])
+ params.use_short_slot_time =
+ nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME]);
+
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ if (err)
+ return err;
+
+ if (!drv->ops->change_bss) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ rtnl_lock();
+ err = drv->ops->change_bss(&drv->wiphy, dev, ¶ms);
+ rtnl_unlock();
+
+ out:
+ cfg80211_put_dev(drv);
+ dev_put(dev);
+ return err;
+}
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
@@ -1691,6 +1737,12 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+ {
+ .cmd = NL80211_CMD_SET_BSS,
+ .doit = nl80211_set_bss,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
};
/* multicast groups */
--
Jouni Malinen PGP id EFC895FA
next reply other threads:[~2008-08-07 13:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-07 13:40 Jouni Malinen [this message]
2008-08-07 13:48 ` [RFC] mac80211/cfg80211: Add BSS configuration options for AP mode Johannes Berg
2008-08-07 14:15 ` Jouni Malinen
2008-08-07 14:18 ` Johannes Berg
2008-08-07 14:27 ` Jouni Malinen
2008-08-07 14:46 ` Johannes Berg
2008-08-07 16:32 ` Jouni Malinen
2008-08-07 14:25 ` Johannes Berg
2008-08-07 14:32 ` Jouni Malinen
2008-08-07 14:45 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080807134043.GA5138@jm.kir.nu \
--to=j@w1.fi \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.