From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Borislav Petkov <petkovbb@gmail.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] ide-disk: move /proc handling to ide-disk_proc.c
Date: Tue, 19 Aug 2008 20:40:13 +0200 [thread overview]
Message-ID: <20080819184013.16469.94516.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20080819183934.16469.69799.sendpatchset@localhost.localdomain>
While at it:
- idedisk_capacity() -> ide_disk_capacity()
- idedisk_proc[] -> ide_disk_proc[]
- idedisk_settings[] -> ide_disk_settings[]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/Makefile | 2
drivers/ide/ide-disk.c | 142 ++------------------------------------------
drivers/ide/ide-disk.h | 5 +
drivers/ide/ide-disk_proc.c | 131 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 144 insertions(+), 136 deletions(-)
Index: b/drivers/ide/Makefile
===================================================================
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
-ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o
+ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o ide-disk_proc.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o ide-floppy_proc.o
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -399,115 +399,11 @@ static void init_idedisk_capacity(ide_dr
}
}
-static sector_t idedisk_capacity(ide_drive_t *drive)
+sector_t ide_disk_capacity(ide_drive_t *drive)
{
return drive->capacity64;
}
-#ifdef CONFIG_IDE_PROC_FS
-static int smart_enable(ide_drive_t *drive)
-{
- ide_task_t args;
- struct ide_taskfile *tf = &args.tf;
-
- memset(&args, 0, sizeof(ide_task_t));
- tf->feature = ATA_SMART_ENABLE;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- return ide_no_data_taskfile(drive, &args);
-}
-
-static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
-{
- ide_task_t args;
- struct ide_taskfile *tf = &args.tf;
-
- memset(&args, 0, sizeof(ide_task_t));
- tf->feature = sub_cmd;
- tf->nsect = 0x01;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- args.data_phase = TASKFILE_IN;
- (void) smart_enable(drive);
- return ide_raw_taskfile(drive, &args, buf, 1);
-}
-
-static int proc_idedisk_read_cache
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t *drive = (ide_drive_t *) data;
- char *out = page;
- int len;
-
- if (drive->dev_flags & IDE_DFLAG_ID_READ)
- len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
- else
- len = sprintf(out, "(none)\n");
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_capacity
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t*drive = (ide_drive_t *)data;
- int len;
-
- len = sprintf(page, "%llu\n", (long long)idedisk_capacity(drive));
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_smart(char *page, char **start, off_t off,
- int count, int *eof, void *data, u8 sub_cmd)
-{
- ide_drive_t *drive = (ide_drive_t *)data;
- int len = 0, i = 0;
-
- if (get_smart_data(drive, page, sub_cmd) == 0) {
- unsigned short *val = (unsigned short *) page;
- char *out = (char *)val + SECTOR_SIZE;
-
- page = out;
- do {
- out += sprintf(out, "%04x%c", le16_to_cpu(*val),
- (++i & 7) ? ' ' : '\n');
- val += 1;
- } while (i < SECTOR_SIZE / 2);
- len = out - page;
- }
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_sv
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- return proc_idedisk_read_smart(page, start, off, count, eof, data,
- ATA_SMART_READ_VALUES);
-}
-
-static int proc_idedisk_read_st
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- return proc_idedisk_read_smart(page, start, off, count, eof, data,
- ATA_SMART_READ_THRESHOLDS);
-}
-
-static ide_proc_entry_t idedisk_proc[] = {
- { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
- { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
- { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL },
- { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL },
- { NULL, 0, NULL, NULL }
-};
-#endif /* CONFIG_IDE_PROC_FS */
-
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
@@ -606,7 +502,7 @@ static void update_ordered(ide_drive_t *
* time we have trimmed the drive capacity if LBA48 is
* not available so we don't need to recheck that.
*/
- capacity = idedisk_capacity(drive);
+ capacity = ide_disk_capacity(drive);
barrier = ata_id_flush_enabled(id) &&
(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
@@ -714,30 +610,6 @@ ide_ext_devset_rw(wcache, wcache);
ide_ext_devset_rw_sync(nowerr, nowerr);
-#ifdef CONFIG_IDE_PROC_FS
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-ide_devset_rw_field(failures, failures);
-ide_devset_rw_field(lun, lun);
-ide_devset_rw_field(max_failures, max_failures);
-
-static const struct ide_proc_devset idedisk_settings[] = {
- IDE_PROC_DEVSET(acoustic, 0, 254),
- IDE_PROC_DEVSET(address, 0, 2),
- IDE_PROC_DEVSET(bios_cyl, 0, 65535),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(failures, 0, 65535),
- IDE_PROC_DEVSET(lun, 0, 7),
- IDE_PROC_DEVSET(max_failures, 0, 65535),
- IDE_PROC_DEVSET(multcount, 0, 16),
- IDE_PROC_DEVSET(nowerr, 0, 1),
- IDE_PROC_DEVSET(wcache, 0, 1),
- { 0 },
-};
-#endif
-
static void idedisk_setup(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
@@ -800,7 +672,7 @@ static void idedisk_setup(ide_drive_t *d
* if possible, give fdisk access to more of the drive,
* by correcting bios_cyls:
*/
- capacity = idedisk_capacity(drive);
+ capacity = ide_disk_capacity(drive);
if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
if (ata_id_lba48_enabled(drive->id)) {
@@ -933,8 +805,8 @@ static ide_driver_t idedisk_driver = {
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idedisk_proc,
- .settings = idedisk_settings,
+ .proc = ide_disk_proc,
+ .settings = ide_disk_settings,
#endif
};
@@ -1028,7 +900,7 @@ static int idedisk_media_changed(struct
static int idedisk_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
- set_capacity(disk, idedisk_capacity(idkp->drive));
+ set_capacity(disk, ide_disk_capacity(idkp->drive));
return 0;
}
@@ -1090,7 +962,7 @@ static int ide_disk_probe(ide_drive_t *d
g->driverfs_dev = &drive->gendev;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
- set_capacity(g, idedisk_capacity(drive));
+ set_capacity(g, ide_disk_capacity(drive));
g->fops = &idedisk_ops;
add_disk(g);
return 0;
Index: b/drivers/ide/ide-disk.h
===================================================================
--- a/drivers/ide/ide-disk.h
+++ b/drivers/ide/ide-disk.h
@@ -13,6 +13,7 @@ struct ide_disk_obj {
container_of((disk)->private_data, struct ide_disk_obj, driver)
/* ide-disk.c */
+sector_t ide_disk_capacity(ide_drive_t *);
ide_decl_devset(address);
ide_decl_devset(multcount);
ide_decl_devset(nowerr);
@@ -22,4 +23,8 @@ ide_decl_devset(acoustic);
/* ide-disk_ioctl.c */
int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+/* ide-disk_proc.c */
+extern ide_proc_entry_t ide_disk_proc[];
+extern const struct ide_proc_devset ide_disk_settings[];
+
#endif /* __IDE_DISK_H */
Index: b/drivers/ide/ide-disk_proc.c
===================================================================
--- /dev/null
+++ b/drivers/ide/ide-disk_proc.c
@@ -0,0 +1,131 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+#include "ide-disk.h"
+
+#ifdef CONFIG_PROC_FS
+static int smart_enable(ide_drive_t *drive)
+{
+ ide_task_t args;
+ struct ide_taskfile *tf = &args.tf;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ tf->feature = ATA_SMART_ENABLE;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
+ args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ return ide_no_data_taskfile(drive, &args);
+}
+
+static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
+{
+ ide_task_t args;
+ struct ide_taskfile *tf = &args.tf;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ tf->feature = sub_cmd;
+ tf->nsect = 0x01;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
+ args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ args.data_phase = TASKFILE_IN;
+ (void) smart_enable(drive);
+ return ide_raw_taskfile(drive, &args, buf, 1);
+}
+
+static int proc_idedisk_read_cache
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t *drive = (ide_drive_t *) data;
+ char *out = page;
+ int len;
+
+ if (drive->dev_flags & IDE_DFLAG_ID_READ)
+ len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
+ else
+ len = sprintf(out, "(none)\n");
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_capacity
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t*drive = (ide_drive_t *)data;
+ int len;
+
+ len = sprintf(page, "%llu\n", (long long)ide_disk_capacity(drive));
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_smart(char *page, char **start, off_t off,
+ int count, int *eof, void *data, u8 sub_cmd)
+{
+ ide_drive_t *drive = (ide_drive_t *)data;
+ int len = 0, i = 0;
+
+ if (get_smart_data(drive, page, sub_cmd) == 0) {
+ unsigned short *val = (unsigned short *) page;
+ char *out = (char *)val + SECTOR_SIZE;
+
+ page = out;
+ do {
+ out += sprintf(out, "%04x%c", le16_to_cpu(*val),
+ (++i & 7) ? ' ' : '\n');
+ val += 1;
+ } while (i < SECTOR_SIZE / 2);
+ len = out - page;
+ }
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_sv
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ return proc_idedisk_read_smart(page, start, off, count, eof, data,
+ ATA_SMART_READ_VALUES);
+}
+
+static int proc_idedisk_read_st
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ return proc_idedisk_read_smart(page, start, off, count, eof, data,
+ ATA_SMART_READ_THRESHOLDS);
+}
+
+ide_proc_entry_t ide_disk_proc[] = {
+ { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
+ { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL },
+ { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL },
+ { NULL, 0, NULL, NULL }
+};
+
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(failures, failures);
+ide_devset_rw_field(lun, lun);
+ide_devset_rw_field(max_failures, max_failures);
+
+const struct ide_proc_devset ide_disk_settings[] = {
+ IDE_PROC_DEVSET(acoustic, 0, 254),
+ IDE_PROC_DEVSET(address, 0, 2),
+ IDE_PROC_DEVSET(bios_cyl, 0, 65535),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(failures, 0, 65535),
+ IDE_PROC_DEVSET(lun, 0, 7),
+ IDE_PROC_DEVSET(max_failures, 0, 65535),
+ IDE_PROC_DEVSET(multcount, 0, 16),
+ IDE_PROC_DEVSET(nowerr, 0, 1),
+ IDE_PROC_DEVSET(wcache, 0, 1),
+ { 0 },
+};
+#endif /* CONFIG_PROC_FS */
next prev parent reply other threads:[~2008-08-19 18:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-19 18:39 [PATCH 1/6] ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify() Bartlomiej Zolnierkiewicz
2008-08-19 18:39 ` [PATCH 2/6] ide-cd: no need to zero drive->special.all Bartlomiej Zolnierkiewicz
2008-08-19 18:39 ` [PATCH 3/6] ide-floppy: move all ioctl handling to ide-floppy_ioctl.c Bartlomiej Zolnierkiewicz
2008-08-19 18:39 ` [PATCH 4/6] ide-floppy: move /proc handling to ide-floppy_proc.c Bartlomiej Zolnierkiewicz
2008-08-19 18:40 ` [PATCH 5/6] ide-disk: move all ioctl handling to ide-disk_ioctl.c Bartlomiej Zolnierkiewicz
2008-08-19 18:40 ` Bartlomiej Zolnierkiewicz [this message]
2008-08-22 10:20 ` [PATCH 1/6] ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify() Sergei Shtylyov
2008-08-22 10:41 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080819184013.16469.94516.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.