From: Ben Hutchings <bhutchings@solarflare.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH 2/3] lm87: Restore original configuration
Date: Wed, 20 Aug 2008 20:15:33 +0000 [thread overview]
Message-ID: <20080820201533.GN7908@solarflare.com> (raw)
This means that if we have to start the monitor when probed, we also
stop it on removal.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
drivers/hwmon/lm87.c | 12 +++++++-----
1 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 0fecbfd..695f5f2 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -199,6 +199,7 @@ struct lm87_data {
unsigned long last_updated; /* In jiffies */
u8 channel; /* register value */
+ u8 config; /* original register value */
u8 in[8]; /* register value */
u8 in_max[8]; /* register value */
@@ -832,6 +833,7 @@ exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
exit_free:
+ lm87_write_value(new_client, LM87_REG_CONFIG, data->config);
kfree(data);
exit:
return err;
@@ -840,12 +842,11 @@ exit:
static void lm87_init_client(struct i2c_client *client)
{
struct lm87_data *data = i2c_get_clientdata(client);
- u8 config;
data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
+ data->config = lm87_read_value(client, LM87_REG_CONFIG);
- config = lm87_read_value(client, LM87_REG_CONFIG);
- if (!(config & 0x01)) {
+ if (!(data->config & 0x01)) {
int i;
/* Limits are left uninitialized after power-up */
@@ -869,9 +870,9 @@ static void lm87_init_client(struct i2c_client *client)
}
/* Make sure Start is set and INT#_Clear is clear */
- if ((config & 0x09) != 0x01)
+ if ((data->config & 0x09) != 0x01)
lm87_write_value(client, LM87_REG_CONFIG,
- (config & 0x77) | 0x01);
+ (data->config & 0x77) | 0x01);
}
static int lm87_remove(struct i2c_client *client)
@@ -882,6 +883,7 @@ static int lm87_remove(struct i2c_client *client)
sysfs_remove_group(&client->dev.kobj, &lm87_group);
sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
+ lm87_write_value(client, LM87_REG_CONFIG, data->config);
kfree(data);
return 0;
}
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2008-08-20 20:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-20 20:15 Ben Hutchings [this message]
2008-08-22 15:01 ` [lm-sensors] [PATCH 2/3] lm87: Restore original configuration Jean Delvare
2008-08-22 15:57 ` Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080820201533.GN7908@solarflare.com \
--to=bhutchings@solarflare.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.