From: Tony Lindgren <tony@atomide.com>
To: Arun KS <arunks@mistralsolutions.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH] OMAP2EVM: Updates defconfig
Date: Sat, 23 Aug 2008 16:14:15 -0700 [thread overview]
Message-ID: <20080823231414.GI4713@atomide.com> (raw)
In-Reply-To: <dfeb90390808230219y6e22bb9dg5113bcdcade7a91f@mail.gmail.com>
* Arun KS <arunks@mistralsolutions.com> [080823 02:19]:
> This patch enables nand, jffs2 and twl4030 keypad support in defconfig
Pushing today.
Tony
> Signed-off-by: Arun KS <arunks@mistralsolutions.com>
> ---
> arch/arm/configs/omap2_evm_defconfig | 196 ++++++++++++++++++++++++++++++----
> 1 files changed, 173 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/configs/omap2_evm_defconfig
> b/arch/arm/configs/omap2_evm_defconfig
> index 9d5b30f..61f0965 100644
> --- a/arch/arm/configs/omap2_evm_defconfig
> +++ b/arch/arm/configs/omap2_evm_defconfig
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.26-omap1
> -# Wed Aug 6 17:05:50 2008
> +# Linux kernel version: 2.6.27-rc3-omap1
> +# Wed Aug 20 21:20:25 2008
> #
> CONFIG_ARM=y
> CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> @@ -12,6 +12,7 @@ CONFIG_MMU=y
> # CONFIG_NO_IOPORT is not set
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_STACKTRACE_SUPPORT=y
> +CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_HARDIRQS_SW_RESEND=y
> @@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_ARCH_SUPPORTS_AOUT=y
> CONFIG_ZONE_DMA=y
> +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> CONFIG_VECTORS_BASE=0xffff0000
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> @@ -81,10 +83,16 @@ CONFIG_SLAB=y
> # CONFIG_MARKERS is not set
> CONFIG_HAVE_OPROFILE=y
> # CONFIG_KPROBES is not set
> +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
> +# CONFIG_HAVE_IOREMAP_PROT is not set
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> +# CONFIG_HAVE_ARCH_TRACEHOOK is not set
> # CONFIG_HAVE_DMA_ATTRS is not set
> +# CONFIG_USE_GENERIC_SMP_HELPERS is not set
> +CONFIG_HAVE_CLK=y
> CONFIG_PROC_PAGE_MONITOR=y
> +CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> @@ -101,6 +109,7 @@ CONFIG_BLOCK=y
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_LSF is not set
> # CONFIG_BLK_DEV_BSG is not set
> +# CONFIG_BLK_DEV_INTEGRITY is not set
>
> #
> # IO Schedulers
> @@ -126,7 +135,6 @@ CONFIG_CLASSIC_RCU=y
> # CONFIG_ARCH_AT91 is not set
> # CONFIG_ARCH_CLPS7500 is not set
> # CONFIG_ARCH_CLPS711X is not set
> -# CONFIG_ARCH_CO285 is not set
> # CONFIG_ARCH_EBSA110 is not set
> # CONFIG_ARCH_EP93XX is not set
> # CONFIG_ARCH_FOOTBRIDGE is not set
> @@ -140,8 +148,11 @@ CONFIG_CLASSIC_RCU=y
> # CONFIG_ARCH_IXP2000 is not set
> # CONFIG_ARCH_IXP4XX is not set
> # CONFIG_ARCH_L7200 is not set
> +# CONFIG_ARCH_KIRKWOOD is not set
> # CONFIG_ARCH_KS8695 is not set
> # CONFIG_ARCH_NS9XXX is not set
> +# CONFIG_ARCH_LOKI is not set
> +# CONFIG_ARCH_MV78XX0 is not set
> # CONFIG_ARCH_MXC is not set
> # CONFIG_ARCH_ORION5X is not set
> # CONFIG_ARCH_PNX4008 is not set
> @@ -200,6 +211,7 @@ CONFIG_ARCH_OMAP2430=y
> #
> # CONFIG_MACH_OMAP_2430SDP is not set
> CONFIG_MACH_OMAP2EVM=y
> +CONFIG_OMAP_TICK_GPTIMER=1
>
> #
> # Boot options
> @@ -314,10 +326,6 @@ CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> # CONFIG_APM_EMULATION is not set
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> -
> -#
> -# Networking
> -#
> CONFIG_NET=y
>
> #
> @@ -430,7 +438,84 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_FW_LOADER is not set
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_CONNECTOR is not set
> -# CONFIG_MTD is not set
> +CONFIG_MTD=y
> +# CONFIG_MTD_DEBUG is not set
> +CONFIG_MTD_CONCAT=y
> +CONFIG_MTD_PARTITIONS=y
> +# CONFIG_MTD_REDBOOT_PARTS is not set
> +CONFIG_MTD_CMDLINE_PARTS=y
> +# CONFIG_MTD_AFS_PARTS is not set
> +# CONFIG_MTD_AR7_PARTS is not set
> +
> +#
> +# User Modules And Translation Layers
> +#
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +# CONFIG_FTL is not set
> +# CONFIG_NFTL is not set
> +# CONFIG_INFTL is not set
> +# CONFIG_RFD_FTL is not set
> +# CONFIG_SSFDC is not set
> +# CONFIG_MTD_OOPS is not set
> +
> +#
> +# RAM/ROM/Flash chip drivers
> +#
> +# CONFIG_MTD_CFI is not set
> +# CONFIG_MTD_JEDECPROBE is not set
> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> +CONFIG_MTD_CFI_I1=y
> +CONFIG_MTD_CFI_I2=y
> +# CONFIG_MTD_CFI_I4 is not set
> +# CONFIG_MTD_CFI_I8 is not set
> +# CONFIG_MTD_RAM is not set
> +# CONFIG_MTD_ROM is not set
> +# CONFIG_MTD_ABSENT is not set
> +
> +#
> +# Mapping drivers for chip access
> +#
> +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> +# CONFIG_MTD_PLATRAM is not set
> +
> +#
> +# Self-contained MTD device drivers
> +#
> +# CONFIG_MTD_DATAFLASH is not set
> +# CONFIG_MTD_M25P80 is not set
> +# CONFIG_MTD_SLRAM is not set
> +# CONFIG_MTD_PHRAM is not set
> +# CONFIG_MTD_MTDRAM is not set
> +# CONFIG_MTD_BLOCK2MTD is not set
> +
> +#
> +# Disk-On-Chip Device Drivers
> +#
> +# CONFIG_MTD_DOC2000 is not set
> +# CONFIG_MTD_DOC2001 is not set
> +# CONFIG_MTD_DOC2001PLUS is not set
> +CONFIG_MTD_NAND=y
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +# CONFIG_MTD_NAND_MUSEUM_IDS is not set
> +CONFIG_MTD_NAND_OMAP2=y
> +CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_DISKONCHIP is not set
> +# CONFIG_MTD_NAND_NANDSIM is not set
> +# CONFIG_MTD_NAND_PLATFORM is not set
> +# CONFIG_MTD_ONENAND is not set
> +
> +#
> +# UBI - Unsorted block images
> +#
> +# CONFIG_MTD_UBI is not set
> # CONFIG_PARPORT is not set
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_COW_COMMON is not set
> @@ -490,10 +575,10 @@ CONFIG_SCSI_WAIT_SCAN=m
> CONFIG_SCSI_LOWLEVEL=y
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_SCSI_DEBUG is not set
> +# CONFIG_SCSI_DH is not set
> # CONFIG_ATA is not set
> # CONFIG_MD is not set
> CONFIG_NETDEVICES=y
> -# CONFIG_NETDEVICES_MULTIQUEUE is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_MACVLAN is not set
> @@ -556,6 +641,7 @@ CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_OMAP is not set
> +CONFIG_KEYBOARD_TWL4030=y
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_INPUT_MOUSE is not set
> @@ -567,6 +653,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
> # CONFIG_TOUCHSCREEN_GUNZE is not set
> # CONFIG_TOUCHSCREEN_ELO is not set
> # CONFIG_TOUCHSCREEN_MTOUCH is not set
> +# CONFIG_TOUCHSCREEN_INEXIO is not set
> # CONFIG_TOUCHSCREEN_MK712 is not set
> # CONFIG_TOUCHSCREEN_PENMOUNT is not set
> # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
> @@ -575,6 +662,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
> # CONFIG_TOUCHSCREEN_TSC2102 is not set
> # CONFIG_TOUCHSCREEN_TSC210X is not set
> # CONFIG_TOUCHSCREEN_UCB1400 is not set
> +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> @@ -587,6 +675,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
> # Character devices
> #
> CONFIG_VT=y
> +CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> @@ -623,26 +712,41 @@ CONFIG_HW_RANDOM_OMAP=y
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_HELPER_AUTO=y
>
> #
> # I2C Hardware Bus support
> #
> +
> +#
> +# I2C system bus drivers (mostly embedded / system-on-chip)
> +#
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_OCORES is not set
> CONFIG_I2C_OMAP=y
> -# CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_SIMTEC is not set
> +
> +#
> +# External I2C/SMBus adapter drivers
> +#
> +# CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_TAOS_EVM is not set
> -# CONFIG_I2C_STUB is not set
> +
> +#
> +# Other I2C/SMBus bus drivers
> +#
> # CONFIG_I2C_PCA_PLATFORM is not set
> +# CONFIG_I2C_STUB is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> +# CONFIG_AT24 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_PCF8575 is not set
> +# CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_ISP1301_OMAP is not set
> # CONFIG_TPS65010 is not set
> @@ -681,21 +785,25 @@ CONFIG_SPI_MASTER=y
> # CONFIG_SPI_TSC2301 is not set
> # CONFIG_SPI_SPIDEV is not set
> # CONFIG_SPI_TLE62X0 is not set
> -CONFIG_HAVE_GPIO_LIB=y
> -
> -#
> -# GPIO Support
> -#
> +CONFIG_ARCH_REQUIRE_GPIOLIB=y
> +CONFIG_GPIOLIB=y
> +# CONFIG_GPIO_SYSFS is not set
>
> #
> # I2C GPIO expanders:
> #
> +# CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCF857X is not set
>
> #
> +# PCI GPIO expanders:
> +#
> +
> +#
> # SPI GPIO expanders:
> #
> +# CONFIG_GPIO_MAX7301 is not set
> # CONFIG_GPIO_MCP23S08 is not set
> # CONFIG_W1 is not set
> # CONFIG_POWER_SUPPLY is not set
> @@ -718,10 +826,14 @@ CONFIG_SSB_POSSIBLE=y
> #
> # Multifunction device drivers
> #
> +# CONFIG_MFD_CORE is not set
> # CONFIG_MFD_SM501 is not set
> -# CONFIG_MFD_ASIC3 is not set
> # CONFIG_HTC_EGPIO is not set
> # CONFIG_HTC_PASIC3 is not set
> +# CONFIG_MFD_TMIO is not set
> +# CONFIG_MFD_T7L66XB is not set
> +# CONFIG_MFD_TC6387XB is not set
> +# CONFIG_MFD_TC6393XB is not set
>
> #
> # Multimedia devices
> @@ -793,10 +905,6 @@ CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> -
> -#
> -# Sound
> -#
> # CONFIG_SOUND is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> @@ -818,11 +926,21 @@ CONFIG_MMC_BLOCK_BOUNCE=y
> #
> # MMC/SD Host Controller Drivers
> #
> +# CONFIG_MMC_SDHCI is not set
> CONFIG_MMC_OMAP_HS=y
> # CONFIG_MMC_SPI is not set
> # CONFIG_NEW_LEDS is not set
> CONFIG_RTC_LIB=y
> # CONFIG_RTC_CLASS is not set
> +# CONFIG_DMADEVICES is not set
> +
> +#
> +# Voltage and Current regulators
> +#
> +# CONFIG_REGULATOR is not set
> +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
> +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> +# CONFIG_REGULATOR_BQ24022 is not set
> # CONFIG_UIO is not set
>
> #
> @@ -894,9 +1012,25 @@ CONFIG_TMPFS=y
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> +CONFIG_JFFS2_FS=y
> +CONFIG_JFFS2_FS_DEBUG=0
> +CONFIG_JFFS2_FS_WRITEBUFFER=y
> +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> +# CONFIG_JFFS2_SUMMARY is not set
> +# CONFIG_JFFS2_FS_XATTR is not set
> +CONFIG_JFFS2_COMPRESSION_OPTIONS=y
> +CONFIG_JFFS2_ZLIB=y
> +# CONFIG_JFFS2_LZO is not set
> +CONFIG_JFFS2_RTIME=y
> +# CONFIG_JFFS2_RUBIN is not set
> +# CONFIG_JFFS2_CMODE_NONE is not set
> +CONFIG_JFFS2_CMODE_PRIORITY=y
> +# CONFIG_JFFS2_CMODE_SIZE is not set
> +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> +# CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> @@ -907,13 +1041,12 @@ CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> # CONFIG_NFS_V4 is not set
> -# CONFIG_NFSD is not set
> CONFIG_ROOT_NFS=y
> +# CONFIG_NFSD is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> -# CONFIG_SUNRPC_BIND34 is not set
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> @@ -998,8 +1131,18 @@ CONFIG_MAGIC_SYSRQ=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_DEBUG_BUGVERBOSE is not set
> +# CONFIG_DEBUG_MEMORY_INIT is not set
> CONFIG_FRAME_POINTER=y
> +# CONFIG_LATENCYTOP is not set
> +CONFIG_HAVE_FTRACE=y
> +CONFIG_HAVE_DYNAMIC_FTRACE=y
> +# CONFIG_FTRACE is not set
> +# CONFIG_IRQSOFF_TRACER is not set
> +# CONFIG_PREEMPT_TRACER is not set
> +# CONFIG_SCHED_TRACER is not set
> +# CONFIG_CONTEXT_SWITCH_TRACER is not set
> # CONFIG_SAMPLES is not set
> +CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_DEBUG_USER is not set
>
> #
> @@ -1053,6 +1196,10 @@ CONFIG_CRYPTO_PCBC=m
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> +# CONFIG_CRYPTO_RMD128 is not set
> +# CONFIG_CRYPTO_RMD160 is not set
> +# CONFIG_CRYPTO_RMD256 is not set
> +# CONFIG_CRYPTO_RMD320 is not set
> # CONFIG_CRYPTO_SHA1 is not set
> # CONFIG_CRYPTO_SHA256 is not set
> # CONFIG_CRYPTO_SHA512 is not set
> @@ -1093,10 +1240,13 @@ CONFIG_BITREVERSE=y
> # CONFIG_GENERIC_FIND_NEXT_BIT is not set
> CONFIG_CRC_CCITT=y
> # CONFIG_CRC16 is not set
> +CONFIG_CRC_T10DIF=m
> # CONFIG_CRC_ITU_T is not set
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> +CONFIG_ZLIB_INFLATE=y
> +CONFIG_ZLIB_DEFLATE=y
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> --
> 1.5.3.4
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-08-23 23:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-23 9:19 [PATCH] OMAP2EVM: Updates defconfig Arun KS
2008-08-23 23:14 ` Tony Lindgren [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-09-24 14:15 Arun KS
2008-08-20 16:17 Arun KS
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080823231414.GI4713@atomide.com \
--to=tony@atomide.com \
--cc=arunks@mistralsolutions.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.